EFM32 Gecko Software Documentation
efm32g-doc-5.1.2
|
Files | |
file | em_acmp.h [code] |
Analog Comparator (ACMP) peripheral API. | |
file | em_adc.h [code] |
Analog to Digital Converter (ADC) peripheral API. | |
file | em_aes.h [code] |
Advanced encryption standard (AES) accelerator peripheral API. | |
file | em_assert.h [code] |
Emlib peripheral API "assert" implementation. | |
file | em_burtc.h [code] |
Backup Real Time Counter (BURTC) peripheral API. | |
file | em_bus.h [code] |
RAM and peripheral bit-field set and clear API. | |
file | em_chip.h [code] |
Chip Initialization API. | |
file | em_cmu.h [code] |
Clock management unit (CMU) API. | |
file | em_common.h [code] |
General purpose utilities. | |
file | em_core.h [code] |
Core interrupt handling API. | |
file | em_cryotimer.h [code] |
Ultra Low Energy Timer/Counter (CRYOTIMER) peripheral API. | |
file | em_crypto.h [code] |
Cryptography accelerator peripheral API. | |
file | em_csen.h [code] |
Capacitive Sense Module (CSEN) peripheral API. | |
file | em_dac.h [code] |
Digital to Analog Converter (DAC) peripheral API. | |
file | em_dbg.h [code] |
Debug (DBG) API. | |
file | em_dma.h [code] |
Direct memory access (DMA) API. | |
file | em_ebi.h [code] |
External Bus Iterface (EBI) peripheral API. | |
file | em_emu.h [code] |
Energy management unit (EMU) peripheral API. | |
file | em_gpcrc.h [code] |
General Purpose Cyclic Redundancy Check (GPCRC) API. | |
file | em_gpio.h [code] |
General Purpose IO (GPIO) peripheral API. | |
file | em_i2c.h [code] |
Inter-intergrated circuit (I2C) peripheral API. | |
file | em_idac.h [code] |
Current Digital to Analog Converter (IDAC) peripheral API. | |
file | em_int.h [code] |
Interrupt enable/disable unit API. | |
file | em_lcd.h [code] |
Liquid Crystal Display (LCD) peripheral API. | |
file | em_ldma.h [code] |
Direct memory access (LDMA) API. | |
file | em_lesense.h [code] |
Low Energy Sensor (LESENSE) peripheral API. | |
file | em_letimer.h [code] |
Low Energy Timer (LETIMER) peripheral API. | |
file | em_leuart.h [code] |
Low Energy Universal Asynchronous Receiver/Transmitter (LEUART) peripheral API. | |
file | em_mpu.h [code] |
Memory protection unit (MPU) peripheral API. | |
file | em_msc.h [code] |
Flash controller (MSC) peripheral API. | |
file | em_opamp.h [code] |
Operational Amplifier (OPAMP) peripheral API. | |
file | em_pcnt.h [code] |
Pulse Counter (PCNT) peripheral API. | |
file | em_prs.h [code] |
Peripheral Reflex System (PRS) peripheral API. | |
file | em_ramfunc.h [code] |
RAM code support. | |
file | em_rmu.h [code] |
Reset Management Unit (RMU) peripheral API. | |
file | em_rtc.h [code] |
Real Time Counter (RTC) peripheral API. | |
file | em_rtcc.h [code] |
Real Time Counter (RTCC) peripheral API. | |
file | em_smu.h [code] |
Security Management Unit (SMU) peripheral API. | |
file | em_system.h [code] |
System API. | |
file | em_timer.h [code] |
Timer/counter (TIMER) peripheral API. | |
file | em_usart.h [code] |
Universal synchronous/asynchronous receiver/transmitter (USART/UART) peripheral API. | |
file | em_vcmp.h [code] |
Voltage Comparator (VCMP) peripheral API. | |
file | em_vdac.h [code] |
Digital to Analog Converter (VDAC) peripheral API. | |
file | em_version.h [code] |
Assign correct part number for include file. | |
file | em_wdog.h [code] |
Watchdog (WDOG) peripheral API. | |