EFM32 Gecko Software Documentation
efm32g-doc-5.1.2
|
Real Time Counter (RTC) peripheral API.
Copyright 2016 Silicon Laboratories, Inc. http://www.silabs.com
Permission is granted to anyone to use this software for any purpose, including commercial applications, and to alter it and redistribute it freely, subject to the following restrictions:
DISCLAIMER OF WARRANTY/LIMITATION OF REMEDIES: Silicon Labs has no obligation to support this Software. Silicon Labs is providing the Software "AS IS", with no express or implied warranties of any kind, including, but not limited to, any implied warranties of merchantability or fitness for any particular purpose or warranties against infringement of any proprietary rights of a third party.
Silicon Labs will not be liable for any consequential, incidental, or special damages, or any other relief, or for any claim by any third party, arising from your use of this Software.
Definition in file em_rtc.h.
Go to the source code of this file.
Data Structures | |
struct | RTC_Init_TypeDef |
Macros | |
#define | RTC_INIT_DEFAULT |
Functions | |
uint32_t | RTC_CompareGet (unsigned int comp) |
Get RTC compare register value. More... | |
void | RTC_CompareSet (unsigned int comp, uint32_t value) |
Set RTC compare register value. More... | |
__STATIC_INLINE uint32_t | RTC_CounterGet (void) |
Get RTC counter value. More... | |
void | RTC_CounterReset (void) |
Restart RTC counter from zero. | |
void | RTC_Enable (bool enable) |
Enable/disable RTC. More... | |
void | RTC_FreezeEnable (bool enable) |
RTC register synchronization freeze control. More... | |
void | RTC_Init (const RTC_Init_TypeDef *init) |
Initialize RTC. More... | |
__STATIC_INLINE void | RTC_IntClear (uint32_t flags) |
Clear one or more pending RTC interrupts. More... | |
__STATIC_INLINE void | RTC_IntDisable (uint32_t flags) |
Disable one or more RTC interrupts. More... | |
__STATIC_INLINE void | RTC_IntEnable (uint32_t flags) |
Enable one or more RTC interrupts. More... | |
__STATIC_INLINE uint32_t | RTC_IntGet (void) |
Get pending RTC interrupt flags. More... | |
__STATIC_INLINE uint32_t | RTC_IntGetEnabled (void) |
Get enabled and pending RTC interrupt flags. Useful for handling more interrupt sources in the same interrupt handler. More... | |
__STATIC_INLINE void | RTC_IntSet (uint32_t flags) |
Set one or more pending RTC interrupts from SW. More... | |
void | RTC_Reset (void) |
Restore RTC to reset state. | |