Detailed Description

DMADRV Direct Memory Access Driver.

Introduction

The DMADRV driver makes it possible to write code using DMA which will work regardless of the type of DMA controller on the underlying microcontroller. It will also make it possible to use DMA in several modules, without the modules knowing of each others existence. The driver does not preclude use of the native emlib API of the underlying DMA controller, on the contrary, this will often result in more efficient code and is a necessity when doing complex DMA operations. The housekeeping functions of this driver will be valuable even in this use-case.

The source files for the DMA driver library resides in the emdrv/dmadrv folder, and are named dmadrv.c and dmadrv.h.

Note: DMA transfer completion callback functions are called from within the DMA interrupt handler.

Configuration Options

Some properties of the DMADRV driver are compile-time configurable. These properties are stored in a file named dmadrv_config.h. A template for this file, containing default values, resides in the emdrv/config folder. Currently the configuration options are:

The interrupt priority of the DMA peripheral.
Number of DMA channels to support.
Use the native emlib API belonging to the underlying DMA hardware in combination with the DMADRV API.

Both configuration options will help reduce the drivers ram memory footprint.

To configure DMADRV, provide your own configuration file. Here is a sample dmadrv_config.h file:

#ifndef __SILICON_LABS_DMADRV_CONFIG_H__
#define __SILICON_LABS_DMADRV_CONFIG_H__

// DMADRV DMA interrupt priority configuration option.
// Set DMA interrupt priority. Range is 0..7, 0 is highest priority.
#define EMDRV_DMADRV_DMA_IRQ_PRIORITY 4

// DMADRV channel count configuration option.
// Number of DMA channels to support. A lower DMA channel count will reduce
// ram memory footprint.
#define EMDRV_DMADRV_DMA_CH_COUNT 4

// DMADRV native API configuration option.
// Use the native emlib api of the DMA controller, but still use DMADRV
// housekeeping functions as AllocateChannel/FreeChannel etc.
#define EMDRV_DMADRV_USE_NATIVE_API

#endif

The API

This section contain brief descriptions of the functions in the API. You will find detailed information on input and output parameters and return values by clicking on the hyperlinked function names. Most functions return an error code, ECODE_EMDRV_DMADRV_OK is returned on success, see ecode.h and dmadrv.h for other error codes.

Your application code must include one header file: dmadrv.h.

DMADRV_Init(), DMADRV_DeInit()
These functions initializes or deinitializes the DMADRV driver. Typically DMADRV_Init() is called once in your startup code.

DMADRV_AllocateChannel(), DMADRV_FreeChannel()
DMA channel reserve and release functions. It is recommended that application code check that DMADRV_AllocateChannel() returns ECODE_EMDRV_DMADRV_OK before starting a DMA transfer.

DMADRV_MemoryPeripheral()
Start a DMA transfer from memory to a peripheral.

DMADRV_PeripheralMemory()
Start a DMA transfer from a peripheral to memory.

DMADRV_MemoryPeripheralPingPong()
Start a DMA ping-pong transfer from memory to a peripheral.

DMADRV_PeripheralMemoryPingPong()
Start a DMA ping-pong transfer from a peripheral to memory.

DMADRV_LdmaStartTransfer()
Start a DMA transfer on a LDMA controller. This function can only be used when configuration option EMDRV_DMADRV_USE_NATIVE_API is defined. It is a wrapper around similar emlib ldma function, but adds support for completion callback and user defined callback function parameter.

DMADRV_StopTransfer()
Stop an ongoing DMA transfer.

DMADRV_TransferActive()
Check if a transfer is ongoing.

DMADRV_TransferCompletePending()
Check if a transfer completion is pending.

DMADRV_TransferDone()
Check if a transfer has completed.

DMADRV_TransferRemainingCount()
Get number of items remaining in a transfer.

Example

Transfer a text string to USART1.

#include "dmadrv.h"

char str[] = "Hello DMA !";
unsigned int channel;

int main( void )
{
  // Initialize DMA.
  DMADRV_Init();

  // Request a DMA channel.
  DMADRV_AllocateChannel( &channel, NULL );

  // Start the DMA transfer.
  DMADRV_MemoryPeripheral( channel,
                           dmadrvPeripheralSignal_USART1_TXBL,
                           (void*)&(USART1->TXDATA),
                           str,
                           true,
                           sizeof( str ),
                           dmadrvDataSize1,
                           NULL,
                           NULL );

  return 0;
}

Macros
#define	DMADRV_MAX_XFER_COUNT ((int)((_DMA_CTRL_N_MINUS_1_MASK >> _DMA_CTRL_N_MINUS_1_SHIFT) + 1))
	Maximum length of one DMA transfer.

#define	ECODE_EMDRV_DMADRV_ALREADY_FREED ( ECODE_EMDRV_DMADRV_BASE \| 0x00000006 )
	DMA channel was free.

#define	ECODE_EMDRV_DMADRV_ALREADY_INITIALIZED ( ECODE_EMDRV_DMADRV_BASE \| 0x00000003 )
	DMA has already been initialized.

#define	ECODE_EMDRV_DMADRV_CH_NOT_ALLOCATED ( ECODE_EMDRV_DMADRV_BASE \| 0x00000007 )
	The channel is not reserved.

#define	ECODE_EMDRV_DMADRV_CHANNELS_EXHAUSTED ( ECODE_EMDRV_DMADRV_BASE \| 0x00000004 )
	No DMA channels available.

#define	ECODE_EMDRV_DMADRV_IN_USE ( ECODE_EMDRV_DMADRV_BASE \| 0x00000005 )
	DMA is in use.

#define	ECODE_EMDRV_DMADRV_NOT_INITIALIZED ( ECODE_EMDRV_DMADRV_BASE \| 0x00000002 )
	DMA is not initialized.

#define	ECODE_EMDRV_DMADRV_OK ( ECODE_OK )
	Success return value.

#define	ECODE_EMDRV_DMADRV_PARAM_ERROR ( ECODE_EMDRV_DMADRV_BASE \| 0x00000001 )
	Illegal input parameter.

Typedefs
typedef bool(*	DMADRV_Callback_t) (unsigned int channel, unsigned int sequenceNo, void *userParam)
	DMADRV transfer completion callback function. More...

Enumerations
enum	DMADRV_Datasize_t { dmadrvDataSize1 = dmaDataSize1, dmadrvDataSize2 = dmaDataSize2, dmadrvDataSize4 = dmaDataSize4 }
	Data size of one UDMA transfer item. More...

enum	DMADRV_Peripheralsignal_t { dmadrvPeripheralSignal_NONE = 0, dmadrvPeripheralSignal_ADC0_SCAN = DMAREQ_ADC0_SCAN, dmadrvPeripheralSignal_ADC0_SINGLE = DMAREQ_ADC0_SINGLE, dmadrvPeripheralSignal_AES_DATARD = DMAREQ_AES_DATARD, dmadrvPeripheralSignal_AES_DATAWR = DMAREQ_AES_DATAWR, dmadrvPeripheralSignal_AES_KEYWR = DMAREQ_AES_KEYWR, dmadrvPeripheralSignal_AES_XORDATAWR = DMAREQ_AES_XORDATAWR, dmadrvPeripheralSignal_DAC0_CH0 = DMAREQ_DAC0_CH0, dmadrvPeripheralSignal_DAC0_CH1 = DMAREQ_DAC0_CH1, dmadrvPeripheralSignal_I2C0_RXDATAV = DMAREQ_I2C0_RXDATAV, dmadrvPeripheralSignal_I2C0_TXBL = DMAREQ_I2C0_TXBL, dmadrvPeripheralSignal_I2C1_RXDATAV = DMAREQ_I2C1_RXDATAV, dmadrvPeripheralSignal_I2C1_TXBL = DMAREQ_I2C1_TXBL, dmadrvPeripheralSignal_LESENSE_BUFDATAV = DMAREQ_LESENSE_BUFDATAV, dmadrvPeripheralSignal_LEUART0_RXDATAV = DMAREQ_LEUART0_RXDATAV, dmadrvPeripheralSignal_LEUART0_TXBL = DMAREQ_LEUART0_TXBL, dmadrvPeripheralSignal_LEUART0_TXEMPTY = DMAREQ_LEUART0_TXEMPTY, dmadrvPeripheralSignal_LEUART1_RXDATAV = DMAREQ_LEUART1_RXDATAV, dmadrvPeripheralSignal_LEUART1_TXBL = DMAREQ_LEUART1_TXBL, dmadrvPeripheralSignal_LEUART1_TXEMPTY = DMAREQ_LEUART1_TXEMPTY, dmadrvPeripheralSignal_MSC_WDATA = DMAREQ_MSC_WDATA, dmadrvPeripheralSignal_TIMER0_CC0 = DMAREQ_TIMER0_CC0, dmadrvPeripheralSignal_TIMER0_CC1 = DMAREQ_TIMER0_CC1, dmadrvPeripheralSignal_TIMER0_CC2 = DMAREQ_TIMER0_CC2, dmadrvPeripheralSignal_TIMER0_UFOF = DMAREQ_TIMER0_UFOF, dmadrvPeripheralSignal_TIMER1_CC0 = DMAREQ_TIMER1_CC0, dmadrvPeripheralSignal_TIMER1_CC1 = DMAREQ_TIMER1_CC1, dmadrvPeripheralSignal_TIMER1_CC2 = DMAREQ_TIMER1_CC2, dmadrvPeripheralSignal_TIMER1_UFOF = DMAREQ_TIMER1_UFOF, dmadrvPeripheralSignal_TIMER2_CC0 = DMAREQ_TIMER2_CC0, dmadrvPeripheralSignal_TIMER2_CC1 = DMAREQ_TIMER2_CC1, dmadrvPeripheralSignal_TIMER2_CC2 = DMAREQ_TIMER2_CC2, dmadrvPeripheralSignal_TIMER2_UFOF = DMAREQ_TIMER2_UFOF, dmadrvPeripheralSignal_TIMER3_CC0 = DMAREQ_TIMER3_CC0, dmadrvPeripheralSignal_TIMER3_CC1 = DMAREQ_TIMER3_CC1, dmadrvPeripheralSignal_TIMER3_CC2 = DMAREQ_TIMER3_CC2, dmadrvPeripheralSignal_TIMER3_UFOF = DMAREQ_TIMER3_UFOF, dmadrvPeripheralSignal_UART0_RXDATAV = DMAREQ_UART0_RXDATAV, dmadrvPeripheralSignal_UART0_TXBL = DMAREQ_UART0_TXBL, dmadrvPeripheralSignal_UART0_TXEMPTY = DMAREQ_UART0_TXEMPTY, dmadrvPeripheralSignal_UART1_RXDATAV = DMAREQ_UART1_RXDATAV, dmadrvPeripheralSignal_UART1_TXBL = DMAREQ_UART1_TXBL, dmadrvPeripheralSignal_UART1_TXEMPTY = DMAREQ_UART1_TXEMPTY, dmadrvPeripheralSignal_USARTRF0_RXDATAV = DMAREQ_USARTRF0_RXDATAV, dmadrvPeripheralSignal_USARTRF0_TXBL = DMAREQ_USARTRF0_TXBL, dmadrvPeripheralSignal_USARTRF0_TXEMPTY = DMAREQ_USARTRF0_TXEMPTY, dmadrvPeripheralSignal_USART1_RXDATAV = DMAREQ_USART1_RXDATAV, dmadrvPeripheralSignal_USART1_RXDATAVRIGHT = DMAREQ_USART1_RXDATAVRIGHT, dmadrvPeripheralSignal_USART1_TXBL = DMAREQ_USART1_TXBL, dmadrvPeripheralSignal_USART1_TXBLRIGHT = DMAREQ_USART1_TXBLRIGHT, dmadrvPeripheralSignal_USART1_TXEMPTY = DMAREQ_USART1_TXEMPTY, dmadrvPeripheralSignal_USART2_RXDATAV = DMAREQ_USART2_RXDATAV, dmadrvPeripheralSignal_USART2_RXDATAVRIGHT = DMAREQ_USART2_RXDATAVRIGHT, dmadrvPeripheralSignal_USART2_TXBL = DMAREQ_USART2_TXBL, dmadrvPeripheralSignal_USART2_TXBLRIGHT = DMAREQ_USART2_TXBLRIGHT, dmadrvPeripheralSignal_USART2_TXEMPTY = DMAREQ_USART2_TXEMPTY }
	Peripherals that can trigger UDMA transfers. More...

Functions
Ecode_t	DMADRV_AllocateChannel (unsigned int channelId, void capabilities)
	Allocate (reserve) a DMA channel. More...

Ecode_t	DMADRV_DeInit (void)
	Deinitialize DMADRV. More...

Ecode_t	DMADRV_FreeChannel (unsigned int channelId)
	Free an allocate (reserved) DMA channel. More...

Ecode_t	DMADRV_Init (void)
	Initialize DMADRV. More...

Ecode_t	DMADRV_MemoryPeripheral (unsigned int channelId, DMADRV_PeripheralSignal_t peripheralSignal, void dst, void src, bool srcInc, int len, DMADRV_DataSize_t size, DMADRV_Callback_t callback, void *cbUserParam)
	Start a memory to peripheral DMA transfer. More...

Ecode_t	DMADRV_MemoryPeripheralPingPong (unsigned int channelId, DMADRV_PeripheralSignal_t peripheralSignal, void dst, void src0, void src1, bool srcInc, int len, DMADRV_DataSize_t size, DMADRV_Callback_t callback, void cbUserParam)
	Start a memory to peripheral ping-pong DMA transfer. More...

Ecode_t	DMADRV_PauseTransfer (unsigned int channelId)
	Pause an ongoing DMA transfer. More...

Ecode_t	DMADRV_PeripheralMemory (unsigned int channelId, DMADRV_PeripheralSignal_t peripheralSignal, void dst, void src, bool dstInc, int len, DMADRV_DataSize_t size, DMADRV_Callback_t callback, void *cbUserParam)
	Start a peripheral to memory DMA transfer. More...

Ecode_t	DMADRV_PeripheralMemoryPingPong (unsigned int channelId, DMADRV_PeripheralSignal_t peripheralSignal, void dst0, void dst1, void src, bool dstInc, int len, DMADRV_DataSize_t size, DMADRV_Callback_t callback, void cbUserParam)
	Start a peripheral to memory ping-pong DMA transfer. More...

Ecode_t	DMADRV_ResumeTransfer (unsigned int channelId)
	Resume an ongoing DMA transfer. More...

Ecode_t	DMADRV_StopTransfer (unsigned int channelId)
	Stop an ongoing DMA transfer. More...

Ecode_t	DMADRV_TransferActive (unsigned int channelId, bool *active)
	Check if a transfer is running. More...

Ecode_t	DMADRV_TransferCompletePending (unsigned int channelId, bool *pending)
	Check if a transfer complete is pending. More...

Ecode_t	DMADRV_TransferDone (unsigned int channelId, bool *done)
	Check if a transfer has completed. More...

Ecode_t	DMADRV_TransferRemainingCount (unsigned int channelId, int *remaining)
	Get number of items remaining in a transfer. More...

Typedef Documentation

typedef bool(* DMADRV_Callback_t) (unsigned int channel, unsigned int sequenceNo, void *userParam)

DMADRV transfer completion callback function.

The callback function is called when a transfer has completed.

Parameters

[in]	channel	The DMA channel number.
[in]	sequenceNo	The number of times the callback had been called. Useful on long chains of linked transfers or on endless ping-pong type transfers.
[in]	userParam	Optional user parameter supplied on DMA invocation.

Returns: When doing ping-pong transfers, return true to continue or false to stop transfers.

Definition at line 80 of file dmadrv.h.

Enumeration Type Documentation

enum DMADRV_Datasize_t

Data size of one UDMA transfer item.

Enumerator
dmadrvDataSize1	Byte.
dmadrvDataSize2	Halfword.
dmadrvDataSize4	Word.

Definition at line 295 of file dmadrv.h.

enum DMADRV_Peripheralsignal_t

Peripherals that can trigger UDMA transfers.

Enumerator
dmadrvPeripheralSignal_NONE	No peripheral selected for DMA triggering.
dmadrvPeripheralSignal_ADC0_SCAN	Trig on ADC0_SCAN.
dmadrvPeripheralSignal_ADC0_SINGLE	Trig on ADC0_SINGLE.
dmadrvPeripheralSignal_AES_DATARD	Trig on AES_DATARD.
dmadrvPeripheralSignal_AES_DATAWR	Trig on AES_DATAWR.
dmadrvPeripheralSignal_AES_KEYWR	Trig on AES_KEYWR.
dmadrvPeripheralSignal_AES_XORDATAWR	Trig on AES_XORDATAWR.
dmadrvPeripheralSignal_DAC0_CH0	Trig on DAC0_CH0.
dmadrvPeripheralSignal_DAC0_CH1	Trig on DAC0_CH1.
dmadrvPeripheralSignal_I2C0_RXDATAV	Trig on I2C0_RXDATAV.
dmadrvPeripheralSignal_I2C0_TXBL	Trig on I2C0_TXBL.
dmadrvPeripheralSignal_I2C1_RXDATAV	Trig on I2C1_RXDATAV.
dmadrvPeripheralSignal_I2C1_TXBL	Trig on I2C1_TXBL.
dmadrvPeripheralSignal_LESENSE_BUFDATAV	Trig on LESENSE_BUFDATAV.
dmadrvPeripheralSignal_LEUART0_RXDATAV	Trig on LEUART0_RXDATAV.
dmadrvPeripheralSignal_LEUART0_TXBL	Trig on LEUART0_TXBL.
dmadrvPeripheralSignal_LEUART0_TXEMPTY	Trig on LEUART0_TXEMPTY.
dmadrvPeripheralSignal_LEUART1_RXDATAV	Trig on LEUART1_RXDATAV.
dmadrvPeripheralSignal_LEUART1_TXBL	Trig on LEUART1_TXBL.
dmadrvPeripheralSignal_LEUART1_TXEMPTY	Trig on LEUART1_TXEMPTY.
dmadrvPeripheralSignal_MSC_WDATA	Trig on MSC_WDATA.
dmadrvPeripheralSignal_TIMER0_CC0	Trig on TIMER0_CC0.
dmadrvPeripheralSignal_TIMER0_CC1	Trig on TIMER0_CC1.
dmadrvPeripheralSignal_TIMER0_CC2	Trig on TIMER0_CC2.
dmadrvPeripheralSignal_TIMER0_UFOF	Trig on TIMER0_UFOF.
dmadrvPeripheralSignal_TIMER1_CC0	Trig on TIMER1_CC0.
dmadrvPeripheralSignal_TIMER1_CC1	Trig on TIMER1_CC1.
dmadrvPeripheralSignal_TIMER1_CC2	Trig on TIMER1_CC2.
dmadrvPeripheralSignal_TIMER1_UFOF	Trig on TIMER1_UFOF.
dmadrvPeripheralSignal_TIMER2_CC0	Trig on TIMER2_CC0.
dmadrvPeripheralSignal_TIMER2_CC1	Trig on TIMER2_CC1.
dmadrvPeripheralSignal_TIMER2_CC2	Trig on TIMER2_CC2.
dmadrvPeripheralSignal_TIMER2_UFOF	Trig on TIMER2_UFOF.
dmadrvPeripheralSignal_TIMER3_CC0	Trig on TIMER3_CC0.
dmadrvPeripheralSignal_TIMER3_CC1	Trig on TIMER3_CC1.
dmadrvPeripheralSignal_TIMER3_CC2	Trig on TIMER3_CC2.
dmadrvPeripheralSignal_TIMER3_UFOF	Trig on TIMER3_UFOF.
dmadrvPeripheralSignal_UART0_RXDATAV	Trig on UART0_RXDATAV.
dmadrvPeripheralSignal_UART0_TXBL	Trig on UART0_TXBL.
dmadrvPeripheralSignal_UART0_TXEMPTY	Trig on UART0_TXEMPTY.
dmadrvPeripheralSignal_UART1_RXDATAV	Trig on UART1_RXDATAV.
dmadrvPeripheralSignal_UART1_TXBL	Trig on UART1_TXBL.
dmadrvPeripheralSignal_UART1_TXEMPTY	Trig on UART1_TXEMPTY.
dmadrvPeripheralSignal_USARTRF0_RXDATAV	Trig on USARTRF0_RXDATAV.
dmadrvPeripheralSignal_USARTRF0_TXBL	Trig on USARTRF0_TXBL.
dmadrvPeripheralSignal_USARTRF0_TXEMPTY	Trig on USARTRF0_TXEMPTY.
dmadrvPeripheralSignal_USART1_RXDATAV	Trig on USART1_RXDATAV.
dmadrvPeripheralSignal_USART1_RXDATAVRIGHT	Trig on USART1_RXDATAVRIGHT.
dmadrvPeripheralSignal_USART1_TXBL	Trig on USART1_TXBL.
dmadrvPeripheralSignal_USART1_TXBLRIGHT	Trig on USART1_TXBLRIGHT.
dmadrvPeripheralSignal_USART1_TXEMPTY	Trig on USART1_TXEMPTY.
dmadrvPeripheralSignal_USART2_RXDATAV	Trig on USART2_RXDATAV.
dmadrvPeripheralSignal_USART2_RXDATAVRIGHT	Trig on USART2_RXDATAVRIGHT.
dmadrvPeripheralSignal_USART2_TXBL	Trig on USART2_TXBL.
dmadrvPeripheralSignal_USART2_TXBLRIGHT	Trig on USART2_TXBLRIGHT.
dmadrvPeripheralSignal_USART2_TXEMPTY	Trig on USART2_TXEMPTY.

Definition at line 90 of file dmadrv.h.

Function Documentation

Ecode_t DMADRV_AllocateChannel	(	unsigned int *	channelId,
		void *	capabilities
	)

Allocate (reserve) a DMA channel.

Parameters

[out]	channelId	The channel Id assigned by DMADRV.
[in]	capabilities	Not used.

Returns: ECODE_EMDRV_DMADRV_OK on success. On failure an appropriate DMADRV Ecode_t is returned.

Definition at line 131 of file dmadrv.c.

References CORE_DECLARE_IRQ_STATE, CORE_ENTER_ATOMIC, CORE_EXIT_ATOMIC, ECODE_EMDRV_DMADRV_CHANNELS_EXHAUSTED, ECODE_EMDRV_DMADRV_NOT_INITIALIZED, ECODE_EMDRV_DMADRV_OK, ECODE_EMDRV_DMADRV_PARAM_ERROR, and initialized.

Referenced by MIC_init(), and SPIDRV_Init().

Ecode_t DMADRV_DeInit ( void )

Deinitialize DMADRV.

If no DMA channels are currently allocated, it will disable DMA hardware and mask associated interrupts.

Returns: ECODE_EMDRV_DMADRV_OK on success. On failure an appropriate DMADRV Ecode_t is returned.

Definition at line 177 of file dmadrv.c.

References _DMA_CONFIG_RESETVALUE, _DMA_IEN_RESETVALUE, CMU_ClockEnable(), cmuClock_DMA, CORE_DECLARE_IRQ_STATE, CORE_ENTER_ATOMIC, CORE_EXIT_ATOMIC, DMA, DMA_IRQn, ECODE_EMDRV_DMADRV_IN_USE, ECODE_EMDRV_DMADRV_OK, and initialized.

Referenced by SPIDRV_DeInit(), and UARTDRV_DeInit().

Ecode_t DMADRV_FreeChannel ( unsigned int channelId )

Free an allocate (reserved) DMA channel.

Parameters

[in] channelId The channel Id to free.

Returns: ECODE_EMDRV_DMADRV_OK on success. On failure an appropriate DMADRV Ecode_t is returned.

Definition at line 225 of file dmadrv.c.

References CORE_DECLARE_IRQ_STATE, CORE_ENTER_ATOMIC, CORE_EXIT_ATOMIC, ECODE_EMDRV_DMADRV_ALREADY_FREED, ECODE_EMDRV_DMADRV_NOT_INITIALIZED, ECODE_EMDRV_DMADRV_OK, ECODE_EMDRV_DMADRV_PARAM_ERROR, and initialized.

Referenced by MIC_deInit(), SPIDRV_DeInit(), and UARTDRV_DeInit().

Ecode_t DMADRV_Init ( void )

Initialize DMADRV.

The DMA hw is initialized.

Returns: ECODE_EMDRV_DMADRV_OK on success. On failure an appropriate DMADRV Ecode_t is returned.

Definition at line 262 of file dmadrv.c.

References CORE_DECLARE_IRQ_STATE, CORE_ENTER_ATOMIC, CORE_EXIT_ATOMIC, DMA_Init(), DMA_IRQn, ECODE_EMDRV_DMADRV_ALREADY_INITIALIZED, ECODE_EMDRV_DMADRV_OK, ECODE_EMDRV_DMADRV_PARAM_ERROR, and initialized.

Referenced by MIC_init(), SPIDRV_Init(), UARTDRV_InitLeuart(), and UARTDRV_InitUart().

Ecode_t DMADRV_MemoryPeripheral	(	unsigned int	channelId,
		DMADRV_PeripheralSignal_t	peripheralSignal,
		void *	dst,
		void *	src,
		bool	srcInc,
		int	len,
		DMADRV_DataSize_t	size,
		DMADRV_Callback_t	callback,
		void *	cbUserParam
	)

Start a memory to peripheral DMA transfer.

Parameters

[in]	channelId	Not used
[in]	peripheralSignal	Selects which peripheral/peripheralsignal to use.
[in]	dst	Destination (peripheral register) memory address.
[in]	src	Source memory address.
[in]	srcInc	Set to true to enable source address increment (increment is according to size parameter).
[in]	len	Number if items (of size size) to transfer.
[in]	size	Item size, byte, halfword or word.
[in]	callback	Function to call on dma completion, use NULL if not needed.
[in]	cbUserParam	Optional user parameter to feed to the callback function. Use NULL if not needed.

Returns: ECODE_EMDRV_DMADRV_OK on success. On failure an appropriate DMADRV Ecode_t is returned.

Definition at line 406 of file dmadrv.c.

Ecode_t DMADRV_MemoryPeripheralPingPong	(	unsigned int	channelId,
		DMADRV_PeripheralSignal_t	peripheralSignal,
		void *	dst,
		void *	src0,
		void *	src1,
		bool	srcInc,
		int	len,
		DMADRV_DataSize_t	size,
		DMADRV_Callback_t	callback,
		void *	cbUserParam
	)

Start a memory to peripheral ping-pong DMA transfer.

Parameters

[in]	channelId	Not used
[in]	peripheralSignal	Selects which peripheral/peripheralsignal to use.
[in]	dst	Destination (peripheral register) memory address.
[in]	src0	Source memory address of first (ping) buffer.
[in]	src1	Source memory address of second (pong) buffer.
[in]	srcInc	Set to true to enable source address increment (increment is according to size parameter).
[in]	len	Number if items (of size size) to transfer.
[in]	size	Item size, byte, halfword or word.
[in]	callback	Function to call on dma completion, use NULL if not needed.
[in]	cbUserParam	Optional user parameter to feed to the callback function. Use NULL if not needed.

Returns: ECODE_EMDRV_DMADRV_OK on success. On failure an appropriate DMADRV Ecode_t is returned.

Definition at line 473 of file dmadrv.c.

Ecode_t DMADRV_PauseTransfer ( unsigned int channelId )

Pause an ongoing DMA transfer.

Parameters

[in] channelId The channel Id of the transfer to pause.

Returns: ECODE_EMDRV_DMADRV_OK on success. On failure an appropriate DMADRV Ecode_t is returned.

Definition at line 645 of file dmadrv.c.

References DMA_ChannelRequestEnable(), ECODE_EMDRV_DMADRV_CH_NOT_ALLOCATED, ECODE_EMDRV_DMADRV_NOT_INITIALIZED, ECODE_EMDRV_DMADRV_OK, ECODE_EMDRV_DMADRV_PARAM_ERROR, and initialized.

Referenced by UARTDRV_PauseTransmit().

Ecode_t DMADRV_PeripheralMemory	(	unsigned int	channelId,
		DMADRV_PeripheralSignal_t	peripheralSignal,
		void *	dst,
		void *	src,
		bool	dstInc,
		int	len,
		DMADRV_DataSize_t	size,
		DMADRV_Callback_t	callback,
		void *	cbUserParam
	)

Start a peripheral to memory DMA transfer.

Parameters

[in]	channelId	Not used
[in]	peripheralSignal	Selects which peripheral/peripheralsignal to use.
[in]	dst	Destination memory address.
[in]	src	Source memory (peripheral register) address.
[in]	dstInc	Set to true to enable destination address increment (increment is according to size parameter).
[in]	len	Number if items (of size size) to transfer.
[in]	size	Item size, byte, halfword or word.
[in]	callback	Function to call on dma completion, use NULL if not needed.
[in]	cbUserParam	Optional user parameter to feed to the callback function. Use NULL if not needed.

Returns: ECODE_EMDRV_DMADRV_OK on success. On failure an appropriate DMADRV Ecode_t is returned.

Definition at line 539 of file dmadrv.c.

Referenced by MIC_start().

Ecode_t DMADRV_PeripheralMemoryPingPong	(	unsigned int	channelId,
		DMADRV_PeripheralSignal_t	peripheralSignal,
		void *	dst0,
		void *	dst1,
		void *	src,
		bool	dstInc,
		int	len,
		DMADRV_DataSize_t	size,
		DMADRV_Callback_t	callback,
		void *	cbUserParam
	)

Start a peripheral to memory ping-pong DMA transfer.

Parameters

[in]	channelId	Not used
[in]	peripheralSignal	Selects which peripheral/peripheralsignal to use.
[in]	dst0	Destination memory address of first (ping) buffer.
[in]	dst1	Destination memory address of second (pong) buffer.
[in]	src	Source memory (peripheral register) address.
[in]	dstInc	Set to true to enable destination address increment (increment is according to size parameter).
[in]	len	Number if items (of size size) to transfer.
[in]	size	Item size, byte, halfword or word.
[in]	callback	Function to call on dma completion, use NULL if not needed.
[in]	cbUserParam	Optional user parameter to feed to the callback function. Use NULL if not needed.

Returns: ECODE_EMDRV_DMADRV_OK on success. On failure an appropriate DMADRV Ecode_t is returned.

Definition at line 606 of file dmadrv.c.

Ecode_t DMADRV_ResumeTransfer ( unsigned int channelId )

Resume an ongoing DMA transfer.

Parameters

[in] channelId The channel Id of the transfer to resume.

Returns: ECODE_EMDRV_DMADRV_OK on success. On failure an appropriate DMADRV Ecode_t is returned.

Definition at line 682 of file dmadrv.c.

References DMA_ChannelRequestEnable(), ECODE_EMDRV_DMADRV_CH_NOT_ALLOCATED, ECODE_EMDRV_DMADRV_NOT_INITIALIZED, ECODE_EMDRV_DMADRV_OK, ECODE_EMDRV_DMADRV_PARAM_ERROR, and initialized.

Referenced by UARTDRV_ResumeTransmit().

Ecode_t DMADRV_StopTransfer ( unsigned int channelId )

Stop an ongoing DMA transfer.

Parameters

[in] channelId The channel Id of the transfer to stop.

Returns: ECODE_EMDRV_DMADRV_OK on success. On failure an appropriate DMADRV Ecode_t is returned.

Definition at line 719 of file dmadrv.c.

References DMA_ChannelEnable(), ECODE_EMDRV_DMADRV_CH_NOT_ALLOCATED, ECODE_EMDRV_DMADRV_NOT_INITIALIZED, ECODE_EMDRV_DMADRV_OK, ECODE_EMDRV_DMADRV_PARAM_ERROR, and initialized.

Referenced by SPIDRV_AbortTransfer(), SPIDRV_DeInit(), and UARTDRV_Abort().

Ecode_t DMADRV_TransferActive	(	unsigned int	channelId,
		bool *	active
	)

Check if a transfer is running.

Parameters

[in]	channelId	The channel Id of the transfer to check.
[out]	active	True if transfer is running, false otherwise.

Returns: ECODE_EMDRV_DMADRV_OK on success. On failure an appropriate DMADRV Ecode_t is returned.

Definition at line 759 of file dmadrv.c.

References DMA_ChannelEnabled(), ECODE_EMDRV_DMADRV_CH_NOT_ALLOCATED, ECODE_EMDRV_DMADRV_NOT_INITIALIZED, ECODE_EMDRV_DMADRV_OK, ECODE_EMDRV_DMADRV_PARAM_ERROR, and initialized.

Referenced by UARTDRV_PauseTransmit(), and UARTDRV_ResumeTransmit().

Ecode_t DMADRV_TransferCompletePending	(	unsigned int	channelId,
		bool *	pending
	)

Check if a transfer complete is pending.

Will check channel interrupt flag. This assumes that the DMA is configured to giva a completion interrupt.

Parameters

[in]	channelId	The channel Id of the transfer to check.
[out]	pending	True if a transfer complete is pending, false otherwise.

Returns: ECODE_EMDRV_DMADRV_OK on success. On failure an appropriate DMADRV Ecode_t is returned.

Definition at line 811 of file dmadrv.c.

References DMA, ECODE_EMDRV_DMADRV_CH_NOT_ALLOCATED, ECODE_EMDRV_DMADRV_NOT_INITIALIZED, ECODE_EMDRV_DMADRV_OK, ECODE_EMDRV_DMADRV_PARAM_ERROR, and initialized.

Ecode_t DMADRV_TransferDone	(	unsigned int	channelId,
		bool *	done
	)

Check if a transfer has completed.

Note: This function is meant to be used in a polled environment. Will only work reliable for transfers NOT using completion interrupt. On UDMA it will only work on basic transfers on primary channel.

Parameters

[in]	channelId	The channel Id of the transfer to check.
[out]	done	True if a transfer has completed, false otherwise.

Returns: ECODE_EMDRV_DMADRV_OK on success. On failure an appropriate DMADRV Ecode_t is returned.

Definition at line 864 of file dmadrv.c.

References _DMA_CTRL_N_MINUS_1_MASK, _DMA_CTRL_N_MINUS_1_SHIFT, CORE_ATOMIC_SECTION, DMA, ECODE_EMDRV_DMADRV_CH_NOT_ALLOCATED, ECODE_EMDRV_DMADRV_NOT_INITIALIZED, ECODE_EMDRV_DMADRV_OK, ECODE_EMDRV_DMADRV_PARAM_ERROR, and initialized.

Ecode_t DMADRV_TransferRemainingCount	(	unsigned int	channelId,
		int *	remaining
	)

Get number of items remaining in a transfer.

Note: This function is does not take into account that a DMA transfers with a chain of linked transfers might be ongoing. It will only check the count for the current transfer. On UDMA it will only work on the primary channel.

Parameters

[in]	channelId	The channel Id of the transfer to check.
[out]	remaining	Number of items remaining in the transfer.

Returns: ECODE_EMDRV_DMADRV_OK on success. On failure an appropriate DMADRV Ecode_t is returned.

Definition at line 930 of file dmadrv.c.

References _DMA_CTRL_N_MINUS_1_MASK, _DMA_CTRL_N_MINUS_1_SHIFT, CORE_ATOMIC_SECTION, DMA, ECODE_EMDRV_DMADRV_CH_NOT_ALLOCATED, ECODE_EMDRV_DMADRV_NOT_INITIALIZED, ECODE_EMDRV_DMADRV_OK, ECODE_EMDRV_DMADRV_PARAM_ERROR, and initialized.

Referenced by SPIDRV_AbortTransfer(), UARTDRV_Abort(), UARTDRV_GetReceiveStatus(), and UARTDRV_GetTransmitStatus().

Detailed Description

Introduction

Configuration Options

The API

Example

Macros

Typedefs

Enumerations

Functions

Typedef Documentation

Enumeration Type Documentation

Function Documentation