EFM32 Happy Gecko Software Documentation
efm32hg-doc-5.1.2
|
Energy Management Unit (EMU) Peripheral API.
Copyright 2016 Silicon Laboratories, Inc. http://www.silabs.com
Permission is granted to anyone to use this software for any purpose, including commercial applications, and to alter it and redistribute it freely, subject to the following restrictions:
DISCLAIMER OF WARRANTY/LIMITATION OF REMEDIES: Silicon Labs has no obligation to support this Software. Silicon Labs is providing the Software "AS IS", with no express or implied warranties of any kind, including, but not limited to, any implied warranties of merchantability or fitness for any particular purpose or warranties against infringement of any proprietary rights of a third party.
Silicon Labs will not be liable for any consequential, incidental, or special damages, or any other relief, or for any claim by any third party, arising from your use of this Software.
Definition in file em_emu.c.
#include <limits.h>
#include "em_emu.h"
#include "em_cmu.h"
#include "em_system.h"
#include "em_common.h"
#include "em_assert.h"
Go to the source code of this file.
Functions | |
void | EMU_DCDCConductionModeSet (EMU_DcdcConductionMode_TypeDef conductionMode, bool rcoDefaultSet) |
Set DCDC LN regulator conduction mode. More... | |
bool | EMU_DCDCInit (const EMU_DCDCInit_TypeDef *dcdcInit) |
Configure DCDC regulator. More... | |
void | EMU_DCDCLnRcoBandSet (EMU_DcdcLnRcoBand_TypeDef band) |
Set DCDC Low-noise RCO band. More... | |
void | EMU_DCDCModeSet (EMU_DcdcMode_TypeDef dcdcMode) |
Set DCDC regulator operating mode. More... | |
void | EMU_DCDCOptimizeSlice (uint32_t em0LoadCurrent_mA) |
Optimize DCDC slice count based on the estimated average load current in EM0. More... | |
bool | EMU_DCDCOutputVoltageSet (uint32_t mV, bool setLpVoltage, bool setLnVoltage) |
Set DCDC output voltage. More... | |
bool | EMU_DCDCPowerOff (void) |
Power off the DCDC regulator. More... | |
void | EMU_EM23Init (const EMU_EM23Init_TypeDef *em23Init) |
Update EMU module with Energy Mode 2 and 3 configuration. More... | |
void | EMU_EnterEM2 (bool restore) |
Enter energy mode 2 (EM2). More... | |
void | EMU_EnterEM3 (bool restore) |
Enter energy mode 3 (EM3). More... | |
void | EMU_EnterEM4 (void) |
Enter energy mode 4 (EM4). More... | |
void | EMU_MemPwrDown (uint32_t blocks) |
Power down memory block. More... | |
void | EMU_RamPowerDown (uint32_t start, uint32_t end) |
Power down RAM memory blocks. More... | |
void | EMU_Restore (void) |
Restore CMU HF clock select state, oscillator enable and voltage scaling (if available) after EMU_EnterEM2() or EMU_EnterEM3() are called with the restore parameter set to false. Calling this function is equivalent to calling EMU_EnterEM2() or EMU_EnterEM3() with the restore parameter set to true, but it allows the application to evaluate the wakeup reason before restoring state. | |
void | EMU_UpdateOscConfig (void) |
Update EMU module with CMU oscillator selection/enable status. More... | |