|
| #define | SL_STATUS_OK ((sl_status_t)0x0000) |
| | No error. More...
|
| |
| #define | SL_STATUS_FAIL ((sl_status_t)0x0001) |
| | Generic error. More...
|
| |
| #define | SL_STATUS_INVALID_STATE ((sl_status_t)0x0002) |
| | Generic invalid state error. More...
|
| |
| #define | SL_STATUS_NOT_READY ((sl_status_t)0x0003) |
| | Module is not ready for requested operation. More...
|
| |
| #define | SL_STATUS_BUSY ((sl_status_t)0x0004) |
| | Module is busy and cannot carry out requested operation. More...
|
| |
| #define | SL_STATUS_IN_PROGRESS ((sl_status_t)0x0005) |
| | Operation is in progress and not yet complete (pass or fail). More...
|
| |
| #define | SL_STATUS_ABORT ((sl_status_t)0x0006) |
| | Operation aborted. More...
|
| |
| #define | SL_STATUS_TIMEOUT ((sl_status_t)0x0007) |
| | Operation timed out. More...
|
| |
| #define | SL_STATUS_PERMISSION ((sl_status_t)0x0008) |
| | Operation not allowed per permissions. More...
|
| |
| #define | SL_STATUS_WOULD_BLOCK ((sl_status_t)0x0009) |
| | Non-blocking operation would block. More...
|
| |
| #define | SL_STATUS_IDLE ((sl_status_t)0x000A) |
| | Operation/module is Idle, cannot carry requested operation. More...
|
| |
| #define | SL_STATUS_IS_WAITING ((sl_status_t)0x000B) |
| | Operation cannot be done while construct is waiting. More...
|
| |
| #define | SL_STATUS_NONE_WAITING ((sl_status_t)0x000C) |
| | No task/construct waiting/pending for that action/event. More...
|
| |
| #define | SL_STATUS_SUSPENDED ((sl_status_t)0x000D) |
| | Operation cannot be done while construct is suspended. More...
|
| |
| #define | SL_STATUS_NOT_AVAILABLE ((sl_status_t)0x000E) |
| | Feature not available due to software configuration. More...
|
| |
| #define | SL_STATUS_NOT_SUPPORTED ((sl_status_t)0x000F) |
| | Feature not supported. More...
|
| |
| #define | SL_STATUS_INITIALIZATION ((sl_status_t)0x0010) |
| | Initialization failed. More...
|
| |
| #define | SL_STATUS_NOT_INITIALIZED ((sl_status_t)0x0011) |
| | Module has not been initialized. More...
|
| |
| #define | SL_STATUS_ALREADY_INITIALIZED ((sl_status_t)0x0012) |
| | Module has already been initialized. More...
|
| |
| #define | SL_STATUS_DELETED ((sl_status_t)0x0013) |
| | Object/construct has been deleted. More...
|
| |
| #define | SL_STATUS_ISR ((sl_status_t)0x0014) |
| | Illegal call from ISR. More...
|
| |
| #define | SL_STATUS_NETWORK_UP ((sl_status_t)0x0015) |
| | Illegal call because network is up. More...
|
| |
| #define | SL_STATUS_NETWORK_DOWN ((sl_status_t)0x0016) |
| | Illegal call because network is down. More...
|
| |
| #define | SL_STATUS_NOT_JOINED ((sl_status_t)0x0017) |
| | Failure due to not being joined in a network. More...
|
| |
| #define | SL_STATUS_NO_BEACONS ((sl_status_t)0x0018) |
| | Invalid operation as there are no beacons. More...
|
| |
| #define | SL_STATUS_ALLOCATION_FAILED ((sl_status_t)0x0019) |
| | Generic allocation error. More...
|
| |
| #define | SL_STATUS_NO_MORE_RESOURCE ((sl_status_t)0x001A) |
| | No more resource available to perform the operation. More...
|
| |
| #define | SL_STATUS_EMPTY ((sl_status_t)0x001B) |
| | Item/list/queue is empty. More...
|
| |
| #define | SL_STATUS_FULL ((sl_status_t)0x001C) |
| | Item/list/queue is full. More...
|
| |
| #define | SL_STATUS_WOULD_OVERFLOW ((sl_status_t)0x001D) |
| | Item would overflow. More...
|
| |
| #define | SL_STATUS_HAS_OVERFLOWED ((sl_status_t)0x001E) |
| | Item/list/queue has been overflowed. More...
|
| |
| #define | SL_STATUS_OWNERSHIP ((sl_status_t)0x001F) |
| | Generic ownership error. More...
|
| |
| #define | SL_STATUS_IS_OWNER ((sl_status_t)0x0020) |
| | Already/still owning resource. More...
|
| |
| #define | SL_STATUS_INVALID_PARAMETER ((sl_status_t)0x0021) |
| | Generic invalid argument or consequence of invalid argument. More...
|
| |
| #define | SL_STATUS_NULL_POINTER ((sl_status_t)0x0022) |
| | Invalid null pointer received as argument. More...
|
| |
| #define | SL_STATUS_INVALID_CONFIGURATION ((sl_status_t)0x0023) |
| | Invalid configuration provided. More...
|
| |
| #define | SL_STATUS_INVALID_MODE ((sl_status_t)0x0024) |
| | Invalid mode. More...
|
| |
| #define | SL_STATUS_INVALID_HANDLE ((sl_status_t)0x0025) |
| | Invalid handle. More...
|
| |
| #define | SL_STATUS_INVALID_TYPE ((sl_status_t)0x0026) |
| | Invalid type for operation. More...
|
| |
| #define | SL_STATUS_INVALID_INDEX ((sl_status_t)0x0027) |
| | Invalid index. More...
|
| |
| #define | SL_STATUS_INVALID_RANGE ((sl_status_t)0x0028) |
| | Invalid range. More...
|
| |
| #define | SL_STATUS_INVALID_KEY ((sl_status_t)0x0029) |
| | Invalid key. More...
|
| |
| #define | SL_STATUS_INVALID_CREDENTIALS ((sl_status_t)0x002A) |
| | Invalid credentials. More...
|
| |
| #define | SL_STATUS_INVALID_COUNT ((sl_status_t)0x002B) |
| | Invalid count. More...
|
| |
| #define | SL_STATUS_INVALID_SIGNATURE ((sl_status_t)0x002C) |
| | Invalid signature / verification failed. More...
|
| |
| #define | SL_STATUS_NOT_FOUND ((sl_status_t)0x002D) |
| | Item could not be found. More...
|
| |
| #define | SL_STATUS_ALREADY_EXISTS ((sl_status_t)0x002E) |
| | Item already exists. More...
|
| |
| #define | SL_STATUS_IO ((sl_status_t)0x002F) |
| | Generic I/O failure. More...
|
| |
| #define | SL_STATUS_IO_TIMEOUT ((sl_status_t)0x0030) |
| | I/O failure due to timeout. More...
|
| |
| #define | SL_STATUS_TRANSMIT ((sl_status_t)0x0031) |
| | Generic transmission error. More...
|
| |
| #define | SL_STATUS_TRANSMIT_UNDERFLOW ((sl_status_t)0x0032) |
| | Transmit underflowed. More...
|
| |
| #define | SL_STATUS_TRANSMIT_INCOMPLETE ((sl_status_t)0x0033) |
| | Transmit is incomplete. More...
|
| |
| #define | SL_STATUS_TRANSMIT_BUSY ((sl_status_t)0x0034) |
| | Transmit is busy. More...
|
| |
| #define | SL_STATUS_RECEIVE ((sl_status_t)0x0035) |
| | Generic reception error. More...
|
| |
| #define | SL_STATUS_OBJECT_READ ((sl_status_t)0x0036) |
| | Failed to read on/via given object. More...
|
| |
| #define | SL_STATUS_OBJECT_WRITE ((sl_status_t)0x0037) |
| | Failed to write on/via given object. More...
|
| |
| #define | SL_STATUS_MESSAGE_TOO_LONG ((sl_status_t)0x0038) |
| | Message is too long. More...
|
| |
| #define | SL_STATUS_ERRNO ((sl_status_t)0x0101) |
| | System error: errno is set and strerror can be used to fetch the error-message. More...
|
| |
| #define | SL_STATUS_NET_MQTT_NO_CONN ((sl_status_t)0x0841) |
| | Not connected to a broker. More...
|
| |
| #define | SL_STATUS_NET_MQTT_LOST_CONN ((sl_status_t)0x0842) |
| | Connection to broker lost. More...
|
| |
| #define | SL_STATUS_NET_MQTT_PROTOCOL ((sl_status_t)0x0843) |
| | Protocol error. More...
|
| |
| #define | SL_STATUS_NET_MQTT_TLS_HANDSHAKE ((sl_status_t)0x0844) |
| | TLS negotiation failed. More...
|
| |
| #define | SL_STATUS_NET_MQTT_PAYLOAD_SIZE ((sl_status_t)0x0845) |
| | Payload size is too large. More...
|
| |
| #define | SL_STATUS_NET_MQTT_NOT_SUPPORTED ((sl_status_t)0x0846) |
| | MQTTv5 properties are set but client is not using MQTTv5. More...
|
| |
| #define | SL_STATUS_NET_MQTT_AUTH ((sl_status_t)0x0847) |
| | Authentication failed. More...
|
| |
| #define | SL_STATUS_NET_MQTT_ACL_DENIED ((sl_status_t)0x0848) |
| | Access control list deny. More...
|
| |
| #define | SL_STATUS_NET_MQTT_MALFORMED_UTF8 ((sl_status_t)0x0849) |
| | Malformed UTF-8 string in the specified MQTT-topic. More...
|
| |
| #define | SL_STATUS_NET_MQTT_DUPLICATE_PROPERTY ((sl_status_t)0x084A) |
| | An MQTTv5 property is duplicated where it is forbidden. More...
|
| |
| #define | SL_STATUS_NET_MQTT_QOS_NOT_SUPPORTED ((sl_status_t)0x084B) |
| | The requested QoS level is not supported by the broker. More...
|
| |
| #define | SL_STATUS_NET_MQTT_OVERSIZE_PACKET ((sl_status_t)0x084C) |
| | Resulting packet will become larger than the broker supports. More...
|
| |
| #define | SL_STATUS_PRINT_INFO_MESSAGE ((sl_status_t)0x0900) |
| | Only information message should be printed, without starting an application. More...
|
| |
1.9.4 
