Utility Functions

Detailed Description

Utility functions.

DO_NOT_INCLUDE_WITH_DOXYGEN

Functions
static void	adcDeInit (void)
	De-initializes the A/D converter. More...
static void	adcInit (void)
	Initializes the A/D converter. More...
static uint16_t	getAdcSample (void)
	Initiates an A/D conversion and reads the sample when done. More...
static float	measureSupplyIR (uint8_t loadSetting)
	Measures the unladed and loaded supply voltage and calculates the intermal resistance of the connected supply. The load is provided by the heater element built in the Si7021. More...
static float	measureSupplyVoltage (unsigned int avg)
	Measures the supply voltage by averaging multiple readings. More...
static void	rtcCb (RTCDRV_TimerID_t id, void *user)
	RTC callback function, called when the timer expired. More...
void	SysTick_Handler (void)
	Interrupt Service Routine for system tick counter. More...
void	UTIL_delay (uint32_t ms)
	Delays number of msTick Systicks (1 ms) More...
uint32_t	UTIL_init (void)
	Sets up the SysTick timer for 1ms interrupts and initializes and starts the RTC timer. More...
bool	UTIL_isLowPower (void)
	Checks if the current power supply has low power capability. More...
void	UTIL_shutdown (void)
	Enter lowest power shutdown mode, EM4S. More...
void	UTIL_sleep (uint32_t ms)
	Delays number of milliseconds in sleep mode (EM2) using the RTC. More...
uint32_t	UTIL_sleepInit (void)
	Sets up the RTC timer used for sleep functions. More...
void	UTIL_supplyGetCharacteristics (uint8_t *type, float *voltage, float *ir)
	Retrieves the supply characteristic variables. More...
uint8_t	UTIL_supplyGetType (void)
	Returns the type of the power supply. More...
void	UTIL_supplyProbe (void)
	Probes the connected supply and determines its type. The results are stored in global variables. More...
uint32_t	UTIL_waitForEvent (uint32_t timeout)
	Delays number of milliseconds in sleep mode (EM2) using the RTC but but returns if an event wakes up the MCU. More...

Function Documentation

static void adcDeInit ( void  )

static

De-initializes the A/D converter.

Returns

None

Definition at line 101 of file util_supply.c.

References _CMU_CTRL_CLKOUTSEL1_MASK, CMU, and PRS_SourceAsyncSignalSet().

Referenced by measureSupplyVoltage().

static void adcInit ( void  )

static

Initializes the A/D converter.

Returns

None

Definition at line 64 of file util_supply.c.

References _ADC_CTRL_RESETVALUE, ADC_InitSingle_TypeDef::acqTime, ADC0, ADC_Init(), ADC_INIT_DEFAULT, ADC_InitSingle(), ADC_INITSINGLE_DEFAULT, ADC_PrescaleCalc(), ADC_TimebaseCalc(), adcAcqTime16, adcPRSSELCh4, adcRef5VDIFF, CMU_ClockEnable(), cmuClock_ADC0, cmuClock_PRS, ADC_Init_TypeDef::prescale, ADC_InitSingle_TypeDef::prsEnable, ADC_InitSingle_TypeDef::prsSel, ADC_InitSingle_TypeDef::reference, and ADC_Init_TypeDef::timebase.

Referenced by measureSupplyVoltage(), and MIC_init().

static uint16_t getAdcSample ( void  )

static

Initiates an A/D conversion and reads the sample when done.

Returns

The output of the A/D conversion

Definition at line 118 of file util_supply.c.

References ADC0, ADC_DataSingleGet(), ADC_IF_SINGLE, ADC_IntGet(), ADC_Start(), and adcStartSingle.

Referenced by measureSupplyVoltage().

static float measureSupplyIR ( uint8_t  loadSetting )

static

Measures the unladed and loaded supply voltage and calculates the intermal resistance of the connected supply. The load is provided by the heater element built in the Si7021.

Parameters

[in]

loadSetting

Heater current setting of the Si7021

Returns

The measured internal resistance of the connected supply

Definition at line 175 of file util_supply.c.

References measureSupplyVoltage(), SI7021_CMD_WRITE_HEATER_CTRL, SI7021_CMD_WRITE_USER_REG1, SI7021_cmdWrite(), and UTIL_delay().

Referenced by UTIL_supplyProbe().

static float measureSupplyVoltage ( unsigned int  avg )

static

Measures the supply voltage by averaging multiple readings.

Parameters

[in]

avg

Number of measurements to average

Returns

The measured voltage

Definition at line 139 of file util_supply.c.

References adcDeInit(), adcInit(), and getAdcSample().

Referenced by measureSupplyIR(), and UTIL_supplyProbe().

static void rtcCb ( RTCDRV_TimerID_t  id, void *  user  )

static

RTC callback function, called when the timer expired.

Parameters

[in]	id	The id of the timer
[in]	user	Extra parameter for user application (not used)

Returns

None

Definition at line 132 of file util_sleep.c.

References rtcComplete.

Referenced by UTIL_sleep(), and UTIL_waitForEvent().

void SysTick_Handler

(

void

)

Interrupt Service Routine for system tick counter.

Returns

None

Definition at line 78 of file util.c.

void UTIL_delay

(

uint32_t

ms

)

Delays number of msTick Systicks (1 ms)

Parameters

[in]

ms

Number of ticks (ms) to delay

Returns

None

Definition at line 97 of file util.c.

References EMU_EnterEM1().

Referenced by BMP_init(), BOARD_flashDeepPowerDown(), BOARD_init(), CCS811_init(), ICM20648_accelGyroCalibrate(), ICM20648_gyroCalibrate(), ICM20648_init(), ICM20648_lowPowerModeEnter(), ICM20648_reset(), ICM20648_wakeOnMotionITEnable(), IMU_config(), measureSupplyIR(), SI1133_init(), SI1133_measureLuxUvi(), SI1133_reset(), SI7021_init(), SI7021_measure(), and SI7210_init().

uint32_t UTIL_init

(

void

)

Sets up the SysTick timer for 1ms interrupts and initializes and starts the RTC timer.

Returns

Returns zero on OK, non-zero otherwise

Definition at line 57 of file util.c.

References CMU_ClockFreqGet(), and cmuClock_CORE.

bool UTIL_isLowPower

(

void

)

Checks if the current power supply has low power capability.

Returns

True if the supply is low power type, false otherwise

Definition at line 305 of file util_supply.c.

References UTIL_SUPPLY_TYPE_CR2032, and UTIL_SUPPLY_TYPE_UNKNOWN.

void UTIL_shutdown

(

void

)

Enter lowest power shutdown mode, EM4S.

Returns

None

Definition at line 118 of file util.c.

References _GPIO_EM4WUEN_EM4WUEN_SHIFT, BOARD_BUTTON_LEFT_PIN, BOARD_BUTTON_PORT, EMU_EM4Init(), EMU_EM4INIT_DEFAULT, EMU_EnterEM4(), GPIO_EM4EnablePinWakeup(), GPIO_PinModeSet(), and gpioModeInputPullFilter.

void UTIL_sleep

(

uint32_t

ms

)

Delays number of milliseconds in sleep mode (EM2) using the RTC.

Parameters

ms	Number of milliseconds to sleep

Returns

None

Definition at line 78 of file util_sleep.c.

References EMU_EnterEM2(), rtcCb(), rtcComplete, RTCDRV_StartTimer(), rtcdrvTimerTypeOneshot, and rtcId.

uint32_t UTIL_sleepInit

(

void

)

Sets up the RTC timer used for sleep functions.

Returns

Returns zero on OK, non-zero otherwise

Definition at line 53 of file util_sleep.c.

References ECODE_EMDRV_RTCDRV_OK, RTCDRV_AllocateTimer(), RTCDRV_Init(), and rtcId.

void UTIL_supplyGetCharacteristics	(	uint8_t *	type,
		float *	voltage,
		float *	ir
	)

Retrieves the supply characteristic variables.

Parameters

[in]	type	Supply type
[in]	voltage	Loaded supply voltage
[in]	ir	Internal resistance of the supply

Returns

None

Definition at line 273 of file util_supply.c.

uint8_t UTIL_supplyGetType

(

void

)

Returns the type of the power supply.

Returns

The type of the supply

Definition at line 291 of file util_supply.c.

void UTIL_supplyProbe

(

void

)

Probes the connected supply and determines its type. The results are stored in global variables.

Returns

None

Definition at line 224 of file util_supply.c.

References measureSupplyIR(), measureSupplyVoltage(), SI7021_deInit(), SI7021_init(), UTIL_SUPPLY_TYPE_AAA, UTIL_SUPPLY_TYPE_CR2032, UTIL_SUPPLY_TYPE_UNKNOWN, and UTIL_SUPPLY_TYPE_USB.

uint32_t UTIL_waitForEvent

(

uint32_t

timeout

)

Delays number of milliseconds in sleep mode (EM2) using the RTC but but returns if an event wakes up the MCU.

Parameters

timeout

Timeout, the maximum number of milliseconds to sleep

Returns

The number of milliseconds remained from the timeout

Definition at line 100 of file util_sleep.c.

References EMU_EnterEM2(), rtcCb(), rtcComplete, RTCDRV_StartTimer(), RTCDRV_TimeRemaining(), rtcdrvTimerTypeOneshot, and rtcId.