Detailed Description

Advanced Encryption Standard Accelerator (AES) Peripheral API.

The AES peripheral supports AES block cipher encryption and decryption with 128 bit and 256 bit keys. The following block cipher modes are supported:

CBC - Cipher Block Chaining mode
CFB - Cipher Feedback mode
CTR - Counter mode
ECB - Electronic Code Book mode
OFB - Output Feedback mode

The following input/output notations should be noted:

Input/output data (plaintext, ciphertext, key etc) are treated as byte arrays, starting with most significant byte. Ie, 32 bytes of plaintext (B0...B31) is located in memory in the same order, with B0 at the lower address and B31 at the higher address.

Byte arrays must always be a multiple of AES block size, ie a multiple of 16. Padding, if required, is done at the end of the byte array.

Byte arrays should be word (32 bit) aligned for performance considerations, since the array is accessed with 32 bit access type. The Cortex-M supports unaligned accesses, but with a performance penalty.

It is possible to specify the same output buffer as input buffer as long as they point to the same address. In that case the provided input buffer is replaced with the encrypted/decrypted output. Notice that the buffers must be exactly overlapping. If partly overlapping, the behaviour is undefined.

It is up to the user to use a cipher mode according to its requirements in order to not break security. Please refer to specific cipher mode theory for details.

References:

Wikipedia - Cipher modes, http://en.wikipedia.org/wiki/Cipher_modes

Recommendation for Block Cipher Modes of Operation, NIST Special Publication 800-38A, 2001 Edition, http://csrc.nist.gov/publications/nistpubs/800-38a/sp800-38a.pdf

E.g. the following example shows how to perform an AES-128 CBC encryption:

Enable clocks:

/* AES is a HFCORECLK peripheral */

CMU_ClockEnable(cmuClock_AES, true);

Execute AES-128 CBC encryption:

/* Encrypt a plaintext message (64 bytes) using the AES CBC block cipher mode with a 128 bits key and initial vector (iv) of 16 bytes.  */
const uint8_t plaintext[64] = {0x6B, 0xC1, 0xBE, 0xE2, 0x2E, 0x40, 0x9F, 0x96,
                            0xE9, 0x3D, 0x7E, 0x11, 0x73, 0x93, 0x17, 0x2A,
                            0xAE, 0x2D, 0x8A, 0x57, 0x1E, 0x03, 0xAC, 0x9C,
                            0x9E, 0xB7, 0x6F, 0xAC, 0x45, 0xAF, 0x8E, 0x51,
                            0x30, 0xC8, 0x1C, 0x46, 0xA3, 0x5C, 0xE4, 0x11,
                            0xE5, 0xFB, 0xC1, 0x19, 0x1A, 0x0A, 0x52, 0xEF,
                            0xF6, 0x9F, 0x24, 0x45, 0xDF, 0x4F, 0x9B, 0x17,
                            0xAD, 0x2B, 0x41, 0x7B, 0xE6, 0x6C, 0x37, 0x10};
const uint8_t key[16] = {0x2B, 0x7E, 0x15, 0x16, 0x28, 0xAE, 0xD2, 0xA6,
                      0xAB, 0xF7, 0x15, 0x88, 0x09, 0xCF, 0x4F, 0x3C};
const uint8_t iv[16] = {0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07,
                     0x08, 0x09, 0x0A, 0x0B, 0x0C, 0x0D, 0x0E, 0x0F};
uint8_t ciphertext[64]; /* Output buffer for encrypted data (ciphertext). */
AES_CBC128(ciphertext, plaintext, 64, key, iv, true);  /* true means encrypt. */

Typedefs
typedef void(*	AES_CtrFuncPtr_TypeDef) (uint8_t *ctr)
	AES counter modification function pointer. More...

Functions
void	AES_CBC128 (uint8_t out, const uint8_t in, unsigned int len, const uint8_t key, const uint8_t iv, bool encrypt)
	Cipher-block chaining (CBC) cipher mode encryption/decryption, 128 bit key. More...

void	AES_CBC256 (uint8_t out, const uint8_t in, unsigned int len, const uint8_t key, const uint8_t iv, bool encrypt)
	Cipher-block chaining (CBC) cipher mode encryption/decryption, 256 bit key. More...

void	AES_CFB128 (uint8_t out, const uint8_t in, unsigned int len, const uint8_t key, const uint8_t iv, bool encrypt)
	Cipher feedback (CFB) cipher mode encryption/decryption, 128 bit key. More...

void	AES_CFB256 (uint8_t out, const uint8_t in, unsigned int len, const uint8_t key, const uint8_t iv, bool encrypt)
	Cipher feedback (CFB) cipher mode encryption/decryption, 256 bit key. More...

void	AES_CTR128 (uint8_t out, const uint8_t in, unsigned int len, const uint8_t key, uint8_t ctr, AES_CtrFuncPtr_TypeDef ctrFunc)
	Counter (CTR) cipher mode encryption/decryption, 128 bit key. More...

void	AES_CTR256 (uint8_t out, const uint8_t in, unsigned int len, const uint8_t key, uint8_t ctr, AES_CtrFuncPtr_TypeDef ctrFunc)
	Counter (CTR) cipher mode encryption/decryption, 256 bit key. More...

void	AES_CTRUpdate32Bit (uint8_t *ctr)
	Update last 32 bits of 128 bit counter, by incrementing with 1. More...

void	AES_DecryptKey128 (uint8_t out, const uint8_t in)
	Generate 128 bit decryption key from 128 bit encryption key. The decryption key is used for some cipher modes when decrypting. More...

void	AES_DecryptKey256 (uint8_t out, const uint8_t in)
	Generate 256 bit decryption key from 256 bit encryption key. The decryption key is used for some cipher modes when decrypting. More...

void	AES_ECB128 (uint8_t out, const uint8_t in, unsigned int len, const uint8_t *key, bool encrypt)
	Electronic Codebook (ECB) cipher mode encryption/decryption, 128 bit key. More...

void	AES_ECB256 (uint8_t out, const uint8_t in, unsigned int len, const uint8_t *key, bool encrypt)
	Electronic Codebook (ECB) cipher mode encryption/decryption, 256 bit key. More...

__STATIC_INLINE void	AES_IntClear (uint32_t flags)
	Clear one or more pending AES interrupts. More...

__STATIC_INLINE void	AES_IntDisable (uint32_t flags)
	Disable one or more AES interrupts. More...

__STATIC_INLINE void	AES_IntEnable (uint32_t flags)
	Enable one or more AES interrupts. More...

__STATIC_INLINE uint32_t	AES_IntGet (void)
	Get pending AES interrupt flags. More...

__STATIC_INLINE uint32_t	AES_IntGetEnabled (void)
	Get enabled and pending AES interrupt flags. Useful for handling more interrupt sources in the same interrupt handler. More...

__STATIC_INLINE void	AES_IntSet (uint32_t flags)
	Set one or more pending AES interrupts from SW. More...

void	AES_OFB128 (uint8_t out, const uint8_t in, unsigned int len, const uint8_t key, const uint8_t iv)
	Output feedback (OFB) cipher mode encryption/decryption, 128 bit key. More...

void	AES_OFB256 (uint8_t out, const uint8_t in, unsigned int len, const uint8_t key, const uint8_t iv)
	Output feedback (OFB) cipher mode encryption/decryption, 256 bit key. More...

Typedef Documentation

typedef void(* AES_CtrFuncPtr_TypeDef) (uint8_t *ctr)

AES counter modification function pointer.

Parameters:

ctr - Ptr to byte array (16 bytes) holding counter to be modified.

Definition at line 116 of file em_aes.h.

Function Documentation

void AES_CBC128	(	uint8_t *	out,
		const uint8_t *	in,
		unsigned int	len,
		const uint8_t *	key,
		const uint8_t *	iv,
		bool	encrypt
	)

Cipher-block chaining (CBC) cipher mode encryption/decryption, 128 bit key.

Encryption:

*           Plaintext                  Plaintext
*               |                          |
*               V                          V
* InitVector ->XOR        +-------------->XOR
*               |         |                |
*               V         |                V
*       +--------------+  |        +--------------+
* Key ->| Block cipher |  |  Key ->| Block cipher |
*       |  encryption  |  |        |  encryption  |
*       +--------------+  |        +--------------+
*               |---------+                |
*               V                          V
*           Ciphertext                 Ciphertext
*

Decryption:

*         Ciphertext                 Ciphertext
*              |----------+                |
*              V          |                V
*       +--------------+  |        +--------------+
* Key ->| Block cipher |  |  Key ->| Block cipher |
*       |  decryption  |  |        |  decryption  |
*       +--------------+  |        +--------------+
*               |         |                |
*               V         |                V
* InitVector ->XOR        +-------------->XOR
*               |                          |
*               V                          V
*           Plaintext                  Plaintext
*

Please refer to general comments on layout and byte ordering of parameters.

Parameters

[out]	out	Buffer to place encrypted/decrypted data. Must be at least `len` long. It may be set equal to `in`, in which case the input buffer is overwritten.
[in]	in	Buffer holding data to encrypt/decrypt. Must be at least `len` long.
[in]	len	Number of bytes to encrypt/decrypt. Must be a multiple of 16.
[in]	key	When doing encryption, this is the 128 bit encryption key. When doing decryption, this is the 128 bit decryption key. The decryption key may be generated from the encryption key with AES_DecryptKey128(). On devices supporting key buffering this argument can be null, if so, the key will not be loaded, as it is assumed the key has been loaded into KEYHA previously.
[in]	iv	128 bit initalization vector to use.
[in]	encrypt	Set to true to encrypt, false to decrypt.

Definition at line 124 of file em_aes.c.

References AES, AES_CTRL_DATASTART, AES_CTRL_DECRYPT, AES_CTRL_KEYBUFEN, AES_CTRL_XORSTART, and AES_STATUS_RUNNING.

void AES_CBC256	(	uint8_t *	out,
		const uint8_t *	in,
		unsigned int	len,
		const uint8_t *	key,
		const uint8_t *	iv,
		bool	encrypt
	)

Cipher-block chaining (CBC) cipher mode encryption/decryption, 256 bit key.

Please see AES_CBC128() for CBC figure.

Please refer to general comments on layout and byte ordering of parameters.

Parameters

[out]	out	Buffer to place encrypted/decrypted data. Must be at least `len` long. It may be set equal to `in`, in which case the input buffer is overwritten.
[in]	in	Buffer holding data to encrypt/decrypt. Must be at least `len` long.
[in]	len	Number of bytes to encrypt/decrypt. Must be a multiple of 16.
[in]	key	When doing encryption, this is the 256 bit encryption key. When doing decryption, this is the 256 bit decryption key. The decryption key may be generated from the encryption key with AES_DecryptKey256().
[in]	iv	128 bit initalization vector to use.
[in]	encrypt	Set to true to encrypt, false to decrypt.

Definition at line 289 of file em_aes.c.

References AES, AES_CTRL_AES256, AES_CTRL_DATASTART, AES_CTRL_DECRYPT, AES_CTRL_XORSTART, and AES_STATUS_RUNNING.

void AES_CFB128	(	uint8_t *	out,
		const uint8_t *	in,
		unsigned int	len,
		const uint8_t *	key,
		const uint8_t *	iv,
		bool	encrypt
	)

Cipher feedback (CFB) cipher mode encryption/decryption, 128 bit key.

Encryption:

*           InitVector    +----------------+
*               |         |                |
*               V         |                V
*       +--------------+  |        +--------------+
* Key ->| Block cipher |  |  Key ->| Block cipher |
*       |  encryption  |  |        |  encryption  |
*       +--------------+  |        +--------------+
*               |         |                |
*               V         |                V
*  Plaintext ->XOR        |   Plaintext ->XOR
*               |---------+                |
*               V                          V
*           Ciphertext                 Ciphertext
*

Decryption:

*          InitVector     +----------------+
*               |         |                |
*               V         |                V
*       +--------------+  |        +--------------+
* Key ->| Block cipher |  |  Key ->| Block cipher |
*       |  encryption  |  |        |  encryption  |
*       +--------------+  |        +--------------+
*               |         |                |
*               V         |                V
*              XOR<- Ciphertext           XOR<- Ciphertext
*               |                          |
*               V                          V
*           Plaintext                  Plaintext
*

Please refer to general comments on layout and byte ordering of parameters.

Parameters

[out]	out	Buffer to place encrypted/decrypted data. Must be at least `len` long. It may be set equal to `in`, in which case the input buffer is overwritten.
[in]	in	Buffer holding data to encrypt/decrypt. Must be at least `len` long.
[in]	len	Number of bytes to encrypt/decrypt. Must be a multiple of 16.
[in]	key	128 bit encryption key is used for both encryption and decryption modes.
[in]	iv	128 bit initalization vector to use.
[in]	encrypt	Set to true to encrypt, false to decrypt.

Definition at line 453 of file em_aes.c.

References AES, AES_CTRL_DATASTART, AES_CTRL_KEYBUFEN, and AES_STATUS_RUNNING.

void AES_CFB256	(	uint8_t *	out,
		const uint8_t *	in,
		unsigned int	len,
		const uint8_t *	key,
		const uint8_t *	iv,
		bool	encrypt
	)

Cipher feedback (CFB) cipher mode encryption/decryption, 256 bit key.

Please see AES_CFB128() for CFB figure.

Please refer to general comments on layout and byte ordering of parameters.

Parameters

[out]	out	Buffer to place encrypted/decrypted data. Must be at least `len` long. It may be set equal to `in`, in which case the input buffer is overwritten.
[in]	in	Buffer holding data to encrypt/decrypt. Must be at least `len` long.
[in]	len	Number of bytes to encrypt/decrypt. Must be a multiple of 16.
[in]	key	256 bit encryption key is used for both encryption and decryption modes.
[in]	iv	128 bit initalization vector to use.
[in]	encrypt	Set to true to encrypt, false to decrypt.

Definition at line 562 of file em_aes.c.

References AES, AES_CTRL_AES256, AES_CTRL_DATASTART, and AES_STATUS_RUNNING.

void AES_CTR128	(	uint8_t *	out,
		const uint8_t *	in,
		unsigned int	len,
		const uint8_t *	key,
		uint8_t *	ctr,
		AES_CtrFuncPtr_TypeDef	ctrFunc
	)

Counter (CTR) cipher mode encryption/decryption, 128 bit key.

Encryption:

*           Counter                    Counter
*              |                          |
*              V                          V
*       +--------------+           +--------------+
* Key ->| Block cipher |     Key ->| Block cipher |
*       |  encryption  |           |  encryption  |
*       +--------------+           +--------------+
*              |                          |
* Plaintext ->XOR            Plaintext ->XOR
*              |                          |
*              V                          V
*         Ciphertext                 Ciphertext
*

Decryption:

*           Counter                    Counter
*              |                          |
*              V                          V
*       +--------------+           +--------------+
* Key ->| Block cipher |     Key ->| Block cipher |
*       |  encryption  |           |  encryption  |
*       +--------------+           +--------------+
*               |                          |
* Ciphertext ->XOR           Ciphertext ->XOR
*               |                          |
*               V                          V
*           Plaintext                  Plaintext
*

Please refer to general comments on layout and byte ordering of parameters.

Parameters

[out]	out	Buffer to place encrypted/decrypted data. Must be at least `len` long. It may be set equal to `in`, in which case the input buffer is overwritten.
[in]	in	Buffer holding data to encrypt/decrypt. Must be at least `len` long.
[in]	len	Number of bytes to encrypt/decrypt. Must be a multiple of 16.
[in]	key	128 bit encryption key. On devices supporting key buffering this argument can be null, if so, the key will not be loaded, as it is assumed the key has been loaded into KEYHA previously.
[in,out]	ctr	128 bit initial counter value. The counter is updated after each AES block encoding through use of `ctrFunc`.
[in]	ctrFunc	Function used to update counter value.

Definition at line 687 of file em_aes.c.

References AES, AES_CTRL_DATASTART, AES_CTRL_KEYBUFEN, and AES_STATUS_RUNNING.

void AES_CTR256	(	uint8_t *	out,
		const uint8_t *	in,
		unsigned int	len,
		const uint8_t *	key,
		uint8_t *	ctr,
		AES_CtrFuncPtr_TypeDef	ctrFunc
	)

Counter (CTR) cipher mode encryption/decryption, 256 bit key.

Please see AES_CTR128() for CTR figure.

Please refer to general comments on layout and byte ordering of parameters.

Parameters

[out]	out	Buffer to place encrypted/decrypted data. Must be at least `len` long. It may be set equal to `in`, in which case the input buffer is overwritten.
[in]	in	Buffer holding data to encrypt/decrypt. Must be at least `len` long.
[in]	len	Number of bytes to encrypt/decrypt. Must be a multiple of 16.
[in]	key	256 bit encryption key.
[in,out]	ctr	128 bit initial counter value. The counter is updated after each AES block encoding through use of `ctrFunc`.
[in]	ctrFunc	Function used to update counter value.

Definition at line 785 of file em_aes.c.

References AES, AES_CTRL_AES256, AES_CTRL_DATASTART, and AES_STATUS_RUNNING.

void AES_CTRUpdate32Bit ( uint8_t * ctr )

Update last 32 bits of 128 bit counter, by incrementing with 1.

Notice that no special consideration is given to possible wrap around. If 32 least significant bits are 0xFFFFFFFF, they will be updated to 0x00000000, ignoring overflow.

Please refer to general comments on layout and byte ordering of parameters.

Parameters

[in,out] ctr Buffer holding 128 bit counter to be updated.

Definition at line 850 of file em_aes.c.

void AES_DecryptKey128	(	uint8_t *	out,
		const uint8_t *	in
	)

Generate 128 bit decryption key from 128 bit encryption key. The decryption key is used for some cipher modes when decrypting.

Please refer to general comments on layout and byte ordering of parameters.

Parameters

[out]	out	Buffer to place 128 bit decryption key. Must be at least 16 bytes long. It may be set equal to `in`, in which case the input buffer is overwritten.
[in]	in	Buffer holding 128 bit encryption key. Must be at least 16 bytes long.

Definition at line 873 of file em_aes.c.

References AES, AES_CMD_START, AES_IF_DONE, AES_IntClear(), and AES_STATUS_RUNNING.

void AES_DecryptKey256	(	uint8_t *	out,
		const uint8_t *	in
	)

Generate 256 bit decryption key from 256 bit encryption key. The decryption key is used for some cipher modes when decrypting.

Please refer to general comments on layout and byte ordering of parameters.

Parameters

[out]	out	Buffer to place 256 bit decryption key. Must be at least 32 bytes long. It may be set equal to `in`, in which case the input buffer is overwritten.
[in]	in	Buffer holding 256 bit encryption key. Must be at least 32 bytes long.

Definition at line 918 of file em_aes.c.

References AES, AES_CMD_START, AES_CTRL_AES256, and AES_STATUS_RUNNING.

void AES_ECB128	(	uint8_t *	out,
		const uint8_t *	in,
		unsigned int	len,
		const uint8_t *	key,
		bool	encrypt
	)

Electronic Codebook (ECB) cipher mode encryption/decryption, 128 bit key.

Encryption:

*          Plaintext                  Plaintext
*              |                          |
*              V                          V
*       +--------------+           +--------------+
* Key ->| Block cipher |     Key ->| Block cipher |
*       |  encryption  |           |  encryption  |
*       +--------------+           +--------------+
*              |                          |
*              V                          V
*         Ciphertext                 Ciphertext
*

Decryption:

*         Ciphertext                 Ciphertext
*              |                          |
*              V                          V
*       +--------------+           +--------------+
* Key ->| Block cipher |     Key ->| Block cipher |
*       |  decryption  |           |  decryption  |
*       +--------------+           +--------------+
*              |                          |
*              V                          V
*          Plaintext                  Plaintext
*

Please refer to general comments on layout and byte ordering of parameters.

Parameters

[out]	out	Buffer to place encrypted/decrypted data. Must be at least `len` long. It may be set equal to `in`, in which case the input buffer is overwritten.
[in]	in	Buffer holding data to encrypt/decrypt. Must be at least `len` long.
[in]	len	Number of bytes to encrypt/decrypt. Must be a multiple of 16.
[in]	key	When doing encryption, this is the 128 bit encryption key. When doing decryption, this is the 128 bit decryption key. The decryption key may be generated from the encryption key with AES_DecryptKey128().
[in]	encrypt	Set to true to encrypt, false to decrypt.

Definition at line 1001 of file em_aes.c.

References AES, AES_CTRL_DATASTART, AES_CTRL_DECRYPT, AES_CTRL_KEYBUFEN, and AES_STATUS_RUNNING.

void AES_ECB256	(	uint8_t *	out,
		const uint8_t *	in,
		unsigned int	len,
		const uint8_t *	key,
		bool	encrypt
	)

Electronic Codebook (ECB) cipher mode encryption/decryption, 256 bit key.

Please see AES_ECB128() for ECB figure.

Please refer to general comments on layout and byte ordering of parameters.

Parameters

[out]	out	Buffer to place encrypted/decrypted data. Must be at least `len` long. It may be set equal to `in`, in which case the input buffer is overwritten.
[in]	in	Buffer holding data to encrypt/decrypt. Must be at least `len` long.
[in]	len	Number of bytes to encrypt/decrypt. Must be a multiple of 16.
[in]	key	When doing encryption, this is the 256 bit encryption key. When doing decryption, this is the 256 bit decryption key. The decryption key may be generated from the encryption key with AES_DecryptKey256().
[in]	encrypt	Set to true to encrypt, false to decrypt.

Definition at line 1102 of file em_aes.c.

References AES, AES_CTRL_AES256, AES_CTRL_DATASTART, AES_CTRL_DECRYPT, and AES_STATUS_RUNNING.

__STATIC_INLINE void AES_IntClear ( uint32_t flags )

Clear one or more pending AES interrupts.

Parameters

[in] flags Pending AES interrupt source to clear. Use a bitwise logic OR combination of valid interrupt flags for the AES module (AES_IF_nnn).

Definition at line 200 of file em_aes.h.

References AES.

Referenced by AES_DecryptKey128().

__STATIC_INLINE void AES_IntDisable ( uint32_t flags )

Disable one or more AES interrupts.

Parameters

[in] flags AES interrupt sources to disable. Use a bitwise logic OR combination of valid interrupt flags for the AES module (AES_IF_nnn).

Definition at line 214 of file em_aes.h.

References AES.

__STATIC_INLINE void AES_IntEnable ( uint32_t flags )

Enable one or more AES interrupts.

Note: Depending on the use, a pending interrupt may already be set prior to enabling the interrupt. Consider using AES_IntClear() prior to enabling if such a pending interrupt should be ignored.

Parameters

[in] flags AES interrupt sources to enable. Use a bitwise logic OR combination of valid interrupt flags for the AES module (AES_IF_nnn).

Definition at line 233 of file em_aes.h.

References AES.

__STATIC_INLINE uint32_t AES_IntGet ( void )

Get pending AES interrupt flags.

Note: The event bits are not cleared by the use of this function.

Returns: AES interrupt sources pending. A bitwise logic OR combination of valid interrupt flags for the AES module (AES_IF_nnn).

Definition at line 250 of file em_aes.h.

References AES.

__STATIC_INLINE uint32_t AES_IntGetEnabled ( void )

Get enabled and pending AES interrupt flags. Useful for handling more interrupt sources in the same interrupt handler.

Note: Interrupt flags are not cleared by the use of this function.

Returns

Pending and enabled AES interrupt sources The return value is the bitwise AND of

the enabled interrupt sources in AES_IEN and
the pending interrupt flags AES_IF

Definition at line 270 of file em_aes.h.

References AES.

__STATIC_INLINE void AES_IntSet ( uint32_t flags )

Set one or more pending AES interrupts from SW.

Parameters

[in] flags AES interrupt sources to set to pending. Use a bitwise logic OR combination of valid interrupt flags for the AES module (AES_IF_nnn).

Definition at line 287 of file em_aes.h.

References AES.

void AES_OFB128	(	uint8_t *	out,
		const uint8_t *	in,
		unsigned int	len,
		const uint8_t *	key,
		const uint8_t *	iv
	)

Output feedback (OFB) cipher mode encryption/decryption, 128 bit key.

Encryption:

*          InitVector    +----------------+
*              |         |                |
*              V         |                V
*       +--------------+ |        +--------------+
* Key ->| Block cipher | |  Key ->| Block cipher |
*       |  encryption  | |        |  encryption  |
*       +--------------+ |        +--------------+
*              |         |                |
*              |---------+                |
*              V                          V
* Plaintext ->XOR            Plaintext ->XOR
*              |                          |
*              V                          V
*         Ciphertext                 Ciphertext
*

Decryption:

*          InitVector    +----------------+
*              |         |                |
*              V         |                V
*       +--------------+ |        +--------------+
* Key ->| Block cipher | |  Key ->| Block cipher |
*       |  encryption  | |        |  encryption  |
*       +--------------+ |        +--------------+
*              |         |                |
*              |---------+                |
*              V                          V
* Ciphertext ->XOR           Ciphertext ->XOR
*              |                          |
*              V                          V
*          Plaintext                  Plaintext
*

Please refer to general comments on layout and byte ordering of parameters.

Parameters

[out]	out	Buffer to place encrypted/decrypted data. Must be at least `len` long. It may be set equal to `in`, in which case the input buffer is overwritten.
[in]	in	Buffer holding data to encrypt/decrypt. Must be at least `len` long.
[in]	len	Number of bytes to encrypt/decrypt. Must be a multiple of 16.
[in]	key	128 bit encryption key.
[in]	iv	128 bit initalization vector to use.

Definition at line 1213 of file em_aes.c.

References AES, AES_CMD_START, AES_CTRL_KEYBUFEN, and AES_STATUS_RUNNING.

void AES_OFB256	(	uint8_t *	out,
		const uint8_t *	in,
		unsigned int	len,
		const uint8_t *	key,
		const uint8_t *	iv
	)

Output feedback (OFB) cipher mode encryption/decryption, 256 bit key.

Please see AES_OFB128() for OFB figure.

Please refer to general comments on layout and byte ordering of parameters.

Parameters

[out]	out	Buffer to place encrypted/decrypted data. Must be at least `len` long. It may be set equal to `in`, in which case the input buffer is overwritten.
[in]	in	Buffer holding data to encrypt/decrypt. Must be at least `len` long.
[in]	len	Number of bytes to encrypt/decrypt. Must be a multiple of 16.
[in]	key	256 bit encryption key.
[in]	iv	128 bit initalization vector to use.

Definition at line 1299 of file em_aes.c.

References AES, AES_CMD_START, AES_CTRL_AES256, and AES_STATUS_RUNNING.

Detailed Description

Typedefs

Functions

Typedef Documentation

Function Documentation