|
EFR32 Mighty Gecko 1 Software Documentation
efr32mg1-doc-5.1.2
|
|
EFR32 Mighty Gecko 1 Software Documentation
efr32mg1-doc-5.1.2
|
General Purpose IO (GPIO) peripheral API.
Copyright 2016 Silicon Laboratories, Inc. http://www.silabs.com
Permission is granted to anyone to use this software for any purpose, including commercial applications, and to alter it and redistribute it freely, subject to the following restrictions:
DISCLAIMER OF WARRANTY/LIMITATION OF REMEDIES: Silicon Labs has no obligation to support this Software. Silicon Labs is providing the Software "AS IS", with no express or implied warranties of any kind, including, but not limited to, any implied warranties of merchantability or fitness for any particular purpose or warranties against infringement of any proprietary rights of a third party.
Silicon Labs will not be liable for any consequential, incidental, or special damages, or any other relief, or for any claim by any third party, arising from your use of this Software.
Definition in file em_gpio.h.
Go to the source code of this file.
Macros | |
| #define | gpioDriveStrengthStrong gpioDriveStrengthStrongAlternateStrong |
| #define | gpioDriveStrengthWeak gpioDriveStrengthWeakAlternateWeak |
Enumerations | |
| enum | GPIO_DriveStrength_TypeDef { gpioDriveStrengthWeakAlternateWeak = GPIO_P_CTRL_DRIVESTRENGTH_WEAK | GPIO_P_CTRL_DRIVESTRENGTHALT_WEAK, gpioDriveStrengthWeakAlternateStrong = GPIO_P_CTRL_DRIVESTRENGTH_WEAK | GPIO_P_CTRL_DRIVESTRENGTHALT_STRONG, gpioDriveStrengthStrongAlternateWeak = GPIO_P_CTRL_DRIVESTRENGTH_STRONG | GPIO_P_CTRL_DRIVESTRENGTHALT_WEAK, gpioDriveStrengthStrongAlternateStrong = GPIO_P_CTRL_DRIVESTRENGTH_STRONG | GPIO_P_CTRL_DRIVESTRENGTHALT_STRONG } |
| enum | GPIO_Mode_TypeDef { gpioModeDisabled = _GPIO_P_MODEL_MODE0_DISABLED, gpioModeInput = _GPIO_P_MODEL_MODE0_INPUT, gpioModeInputPull = _GPIO_P_MODEL_MODE0_INPUTPULL, gpioModeInputPullFilter = _GPIO_P_MODEL_MODE0_INPUTPULLFILTER, gpioModePushPull = _GPIO_P_MODEL_MODE0_PUSHPULL, gpioModePushPullAlternate = _GPIO_P_MODEL_MODE0_PUSHPULLALT, gpioModeWiredOr = _GPIO_P_MODEL_MODE0_WIREDOR, gpioModeWiredOrPullDown = _GPIO_P_MODEL_MODE0_WIREDORPULLDOWN, gpioModeWiredAnd = _GPIO_P_MODEL_MODE0_WIREDAND, gpioModeWiredAndFilter = _GPIO_P_MODEL_MODE0_WIREDANDFILTER, gpioModeWiredAndPullUp = _GPIO_P_MODEL_MODE0_WIREDANDPULLUP, gpioModeWiredAndPullUpFilter = _GPIO_P_MODEL_MODE0_WIREDANDPULLUPFILTER, gpioModeWiredAndAlternate = _GPIO_P_MODEL_MODE0_WIREDANDALT, gpioModeWiredAndAlternateFilter = _GPIO_P_MODEL_MODE0_WIREDANDALTFILTER, gpioModeWiredAndAlternatePullUp = _GPIO_P_MODEL_MODE0_WIREDANDALTPULLUP, gpioModeWiredAndAlternatePullUpFilter = _GPIO_P_MODEL_MODE0_WIREDANDALTPULLUPFILTER } |
| enum | GPIO_Port_TypeDef |
Functions | |
| void | GPIO_DbgLocationSet (unsigned int location) |
| Sets the pin location of the debug pins (Serial Wire interface). More... | |
| __STATIC_INLINE void | GPIO_DbgSWDClkEnable (bool enable) |
| Enable/disable serial wire clock pin. More... | |
| __STATIC_INLINE void | GPIO_DbgSWDIOEnable (bool enable) |
| Enable/disable serial wire data I/O pin. More... | |
| __STATIC_INLINE void | GPIO_DbgSWOEnable (bool enable) |
| Enable/Disable serial wire output pin. More... | |
| void | GPIO_DriveStrengthSet (GPIO_Port_TypeDef port, GPIO_DriveStrength_TypeDef strength) |
| Sets the drive strength for a GPIO port. More... | |
| __STATIC_INLINE void | GPIO_EM4DisablePinWakeup (uint32_t pinmask) |
| Disable GPIO pin wake-up from EM4. More... | |
| void | GPIO_EM4EnablePinWakeup (uint32_t pinmask, uint32_t polaritymask) |
| Enable GPIO pin wake-up from EM4. When the function exits, EM4 mode can be safely entered. More... | |
| __STATIC_INLINE uint32_t | GPIO_EM4GetPinWakeupCause (void) |
| Check which GPIO pin(s) that caused a wake-up from EM4. More... | |
| __STATIC_INLINE void | GPIO_EM4SetPinRetention (bool enable) |
| Enable GPIO pin retention of output enable, output value, pull enable and pull direction in EM4. More... | |
| void | GPIO_ExtIntConfig (GPIO_Port_TypeDef port, unsigned int pin, unsigned int intNo, bool risingEdge, bool fallingEdge, bool enable) |
| Configure GPIO external pin interrupt. More... | |
| __STATIC_INLINE void | GPIO_InputSenseSet (uint32_t val, uint32_t mask) |
| Enable/disable input sensing. More... | |
| __STATIC_INLINE void | GPIO_IntClear (uint32_t flags) |
| Clear one or more pending GPIO interrupts. More... | |
| __STATIC_INLINE void | GPIO_IntConfig (GPIO_Port_TypeDef port, unsigned int pin, bool risingEdge, bool fallingEdge, bool enable) |
| Configure GPIO interrupt. More... | |
| __STATIC_INLINE void | GPIO_IntDisable (uint32_t flags) |
| Disable one or more GPIO interrupts. More... | |
| __STATIC_INLINE void | GPIO_IntEnable (uint32_t flags) |
| Enable one or more GPIO interrupts. More... | |
| __STATIC_INLINE uint32_t | GPIO_IntGet (void) |
| Get pending GPIO interrupts. More... | |
| __STATIC_INLINE uint32_t | GPIO_IntGetEnabled (void) |
| Get enabled and pending GPIO interrupt flags. Useful for handling more interrupt sources in the same interrupt handler. More... | |
| __STATIC_INLINE void | GPIO_IntSet (uint32_t flags) |
| Set one or more pending GPIO interrupts from SW. More... | |
| __STATIC_INLINE void | GPIO_Lock (void) |
| Locks the GPIO configuration. | |
| __STATIC_INLINE unsigned int | GPIO_PinInGet (GPIO_Port_TypeDef port, unsigned int pin) |
| Read the pad value for a single pin in a GPIO port. More... | |
| GPIO_Mode_TypeDef | GPIO_PinModeGet (GPIO_Port_TypeDef port, unsigned int pin) |
| Get the mode for a GPIO pin. More... | |
| void | GPIO_PinModeSet (GPIO_Port_TypeDef port, unsigned int pin, GPIO_Mode_TypeDef mode, unsigned int out) |
| Set the mode for a GPIO pin. More... | |
| __STATIC_INLINE void | GPIO_PinOutClear (GPIO_Port_TypeDef port, unsigned int pin) |
| Set a single pin in GPIO data out port register to 0. More... | |
| __STATIC_INLINE unsigned int | GPIO_PinOutGet (GPIO_Port_TypeDef port, unsigned int pin) |
| Get current setting for a pin in a GPIO port data out register. More... | |
| __STATIC_INLINE void | GPIO_PinOutSet (GPIO_Port_TypeDef port, unsigned int pin) |
| Set a single pin in GPIO data out register to 1. More... | |
| __STATIC_INLINE void | GPIO_PinOutToggle (GPIO_Port_TypeDef port, unsigned int pin) |
| Toggle a single pin in GPIO port data out register. More... | |
| __STATIC_INLINE uint32_t | GPIO_PortInGet (GPIO_Port_TypeDef port) |
| Read the pad values for GPIO port. More... | |
| __STATIC_INLINE void | GPIO_PortOutClear (GPIO_Port_TypeDef port, uint32_t pins) |
| Set bits in DOUT register for a port to 0. More... | |
| __STATIC_INLINE uint32_t | GPIO_PortOutGet (GPIO_Port_TypeDef port) |
| Get current setting for a GPIO port data out register. More... | |
| __STATIC_INLINE void | GPIO_PortOutSet (GPIO_Port_TypeDef port, uint32_t pins) |
| Set bits GPIO data out register to 1. More... | |
| __STATIC_INLINE void | GPIO_PortOutSetVal (GPIO_Port_TypeDef port, uint32_t val, uint32_t mask) |
| Set GPIO port data out register. More... | |
| __STATIC_INLINE void | GPIO_PortOutToggle (GPIO_Port_TypeDef port, uint32_t pins) |
| Toggle pins in GPIO port data out register. More... | |
| __STATIC_INLINE void | GPIO_SlewrateSet (GPIO_Port_TypeDef port, uint32_t slewrate, uint32_t slewrateAlt) |
| Set slewrate for pins on a GPIO port. More... | |
| __STATIC_INLINE void | GPIO_Unlock (void) |
| Unlocks the GPIO configuration. | |
1.8.10 
