EFM32 Wonder Gecko Software Documentation
efm32wg-doc-5.1.2
|
Macros | |
#define | __CM4_REV 0x001 |
#define | _EFM32_WONDER_FAMILY 1 |
#define | _EFM_DEVICE |
#define | _SILICON_LABS_32B_PLATFORM 1 |
#define | _SILICON_LABS_32B_PLATFORM_1 |
#define | _SILICON_LABS_32B_SERIES 0 |
#define | _SILICON_LABS_32B_SERIES_0 |
#define | _SILICON_LABS_GECKO_INTERNAL_SDID 74 /** Silicon Labs internal use only, may change any time */ |
#define | _SILICON_LABS_GECKO_INTERNAL_SDID_74 /** Silicon Labs internal use only, may change any time */ |
#define | ACMP_COUNT 2 |
#define | ACMP_PRESENT |
#define | ADC_COUNT 1 |
#define | ADC_PRESENT |
#define | AES_COUNT 1 |
#define | AES_MEM_BASE ((uint32_t) 0x400E0000UL) |
#define | AES_MEM_BITS ((uint32_t) 0x10UL) |
#define | AES_MEM_END ((uint32_t) 0x400E03FFUL) |
#define | AES_MEM_SIZE ((uint32_t) 0x400UL) |
#define | AES_PRESENT |
#define | AFACHAN_MAX 53 |
#define | AFCHAN_MAX 163 |
#define | AFCHANLOC_MAX 7 |
#define | ANALOG_COUNT 1 |
#define | ANALOG_PRESENT |
#define | BITBAND_PER_BASE ((uint32_t) 0x42000000UL) |
#define | BITBAND_RAM_BASE ((uint32_t) 0x22000000UL) |
#define | BOOTLOADER_COUNT 1 |
#define | BOOTLOADER_PRESENT |
#define | BU_COUNT 1 |
#define | BU_PRESENT |
#define | BURTC_COUNT 1 |
#define | BURTC_PRESENT |
#define | CMU_COUNT 1 |
#define | CMU_PRESENT |
#define | DAC_COUNT 1 |
#define | DAC_PRESENT |
#define | DBG_COUNT 1 |
#define | DBG_PRESENT |
#define | DMA_CHAN_COUNT 12 |
#define | DMA_COUNT 1 |
#define | DMA_PRESENT |
#define | EBI_CODE_MEM_BASE ((uint32_t) 0x12000000UL) |
#define | EBI_CODE_MEM_BITS ((uint32_t) 0x28UL) |
#define | EBI_CODE_MEM_END ((uint32_t) 0x1FFFFFFFUL) |
#define | EBI_CODE_MEM_SIZE ((uint32_t) 0xE000000UL) |
#define | EBI_COUNT 1 |
#define | EBI_MEM_BASE ((uint32_t) 0x80000000UL) |
#define | EBI_MEM_BITS ((uint32_t) 0x30UL) |
#define | EBI_MEM_END ((uint32_t) 0xBFFFFFFFUL) |
#define | EBI_MEM_SIZE ((uint32_t) 0x40000000UL) |
#define | EBI_PRESENT |
#define | EMU_COUNT 1 |
#define | EMU_PRESENT |
#define | ETM_COUNT 1 |
#define | ETM_PRESENT |
#define | EXT_IRQ_COUNT 40 |
#define | FLASH_BASE (0x00000000UL) |
#define | FLASH_MEM_BASE ((uint32_t) 0x0UL) |
#define | FLASH_MEM_BITS ((uint32_t) 0x28UL) |
#define | FLASH_MEM_END ((uint32_t) 0xFFFFFFFUL) |
#define | FLASH_MEM_SIZE ((uint32_t) 0x10000000UL) |
#define | FLASH_PAGE_SIZE 2048 |
#define | FLASH_SIZE (0x00040000UL) |
#define | FPUEH_COUNT 1 |
#define | FPUEH_PRESENT |
#define | GPIO_COUNT 1 |
#define | GPIO_PRESENT |
#define | HFXTAL_COUNT 1 |
#define | HFXTAL_PRESENT |
#define | I2C_COUNT 2 |
#define | I2C_PRESENT |
#define | LCD_COUNT 1 |
#define | LCD_PRESENT |
#define | LE_COUNT 1 |
#define | LE_PRESENT |
#define | LESENSE_COUNT 1 |
#define | LESENSE_PRESENT |
#define | LETIMER_COUNT 1 |
#define | LETIMER_PRESENT |
#define | LEUART_COUNT 2 |
#define | LEUART_PRESENT |
#define | LFXTAL_COUNT 1 |
#define | LFXTAL_PRESENT |
#define | MSC_COUNT 1 |
#define | MSC_PRESENT |
#define | OPAMP_COUNT 1 |
#define | OPAMP_PRESENT |
#define | PART_NUMBER "EFM32WG995F256" |
#define | PCNT_COUNT 3 |
#define | PCNT_PRESENT |
#define | PER_MEM_BASE ((uint32_t) 0x40000000UL) |
#define | PER_MEM_BITS ((uint32_t) 0x20UL) |
#define | PER_MEM_END ((uint32_t) 0x400DFFFFUL) |
#define | PER_MEM_SIZE ((uint32_t) 0xE0000UL) |
#define | PRS_CHAN_COUNT 12 |
#define | PRS_COUNT 1 |
#define | PRS_PRESENT |
#define | RAM_CODE_MEM_BASE ((uint32_t) 0x10000000UL) |
#define | RAM_CODE_MEM_BITS ((uint32_t) 0x17UL) |
#define | RAM_CODE_MEM_END ((uint32_t) 0x1001FFFFUL) |
#define | RAM_CODE_MEM_SIZE ((uint32_t) 0x20000UL) |
#define | RAM_MEM_BASE ((uint32_t) 0x20000000UL) |
#define | RAM_MEM_BITS ((uint32_t) 0x18UL) |
#define | RAM_MEM_END ((uint32_t) 0x2003FFFFUL) |
#define | RAM_MEM_SIZE ((uint32_t) 0x40000UL) |
#define | RMU_COUNT 1 |
#define | RMU_PRESENT |
#define | RTC_COUNT 1 |
#define | RTC_PRESENT |
#define | SRAM_BASE (0x20000000UL) |
#define | SRAM_SIZE (0x00008000UL) |
#define | TIMER_COUNT 4 |
#define | TIMER_PRESENT |
#define | UART_COUNT 2 |
#define | UART_PRESENT |
#define | USART_COUNT 3 |
#define | USART_PRESENT |
#define | USB_COUNT 1 |
#define | USB_PRESENT |
#define | USBC_COUNT 1 |
#define | USBC_MEM_BASE ((uint32_t) 0x40100000UL) |
#define | USBC_MEM_BITS ((uint32_t) 0x18UL) |
#define | USBC_MEM_END ((uint32_t) 0x4013FFFFUL) |
#define | USBC_MEM_SIZE ((uint32_t) 0x40000UL) |
#define | USBC_PRESENT |
#define | VCMP_COUNT 1 |
#define | VCMP_PRESENT |
#define | WDOG_COUNT 1 |
#define | WDOG_PRESENT |
#define __CM4_REV 0x001 |
Cortex-M4 Core revision r0p1
Definition at line 188 of file efm32wg995f256.h.
#define _EFM32_WONDER_FAMILY 1 |
Part family Wonder Gecko EFM32WG MCU Family
Definition at line 127 of file efm32wg995f256.h.
#define _EFM_DEVICE |
Silicon Labs EFM-type microcontroller
Definition at line 128 of file efm32wg995f256.h.
#define _SILICON_LABS_32B_PLATFORM 1 |
Definition at line 134 of file efm32wg995f256.h.
#define _SILICON_LABS_32B_PLATFORM_1 |
Definition at line 133 of file efm32wg995f256.h.
#define _SILICON_LABS_32B_SERIES 0 |
Silicon Labs series number
Definition at line 130 of file efm32wg995f256.h.
#define _SILICON_LABS_32B_SERIES_0 |
Silicon Labs series number
Definition at line 129 of file efm32wg995f256.h.
#define ACMP_COUNT 2 |
2 ACMPs available
Definition at line 208 of file efm32wg995f256.h.
#define ACMP_PRESENT |
ACMP is available in this part
Definition at line 207 of file efm32wg995f256.h.
#define ADC_COUNT 1 |
1 ADCs available
Definition at line 218 of file efm32wg995f256.h.
#define ADC_PRESENT |
ADC is available in this part
Definition at line 217 of file efm32wg995f256.h.
#define AES_MEM_BASE ((uint32_t) 0x400E0000UL) |
AES base address
Definition at line 149 of file efm32wg995f256.h.
#define AES_MEM_BITS ((uint32_t) 0x10UL) |
AES used bits
Definition at line 152 of file efm32wg995f256.h.
#define AES_MEM_END ((uint32_t) 0x400E03FFUL) |
AES end address
Definition at line 151 of file efm32wg995f256.h.
#define AES_MEM_SIZE ((uint32_t) 0x400UL) |
AES available address space
Definition at line 150 of file efm32wg995f256.h.
#define AFACHAN_MAX 53 |
Analog AF channels
Definition at line 197 of file efm32wg995f256.h.
#define AFCHAN_MAX 163 |
AF channels connect the different on-chip peripherals with the af-mux
Definition at line 194 of file efm32wg995f256.h.
#define BITBAND_PER_BASE ((uint32_t) 0x42000000UL) |
Bit banding area Peripheral Address Space bit-band area
Definition at line 179 of file efm32wg995f256.h.
Referenced by BUS_RegBitRead(), and BUS_RegBitWrite().
#define BITBAND_RAM_BASE ((uint32_t) 0x22000000UL) |
SRAM Address Space bit-band area
Definition at line 180 of file efm32wg995f256.h.
Referenced by BUS_RamBitRead(), and BUS_RamBitWrite().
#define DAC_COUNT 1 |
1 DACs available
Definition at line 220 of file efm32wg995f256.h.
#define DAC_PRESENT |
DAC is available in this part
Definition at line 219 of file efm32wg995f256.h.
#define DMA_CHAN_COUNT 12 |
Number of DMA channels
Definition at line 190 of file efm32wg995f256.h.
Referenced by DMA_ActivateAuto(), DMA_ActivateBasic(), DMA_ActivatePingPong(), DMA_ActivateScatterGather(), DMA_CfgChannel(), DMA_CfgDescr(), DMA_ChannelEnable(), DMA_ChannelEnabled(), DMA_ChannelRequestEnable(), DMA_RefreshPingPong(), DMA_Reset(), and NANDFLASH_Init().
#define EBI_CODE_MEM_BASE ((uint32_t) 0x12000000UL) |
EBI_CODE base address
Definition at line 157 of file efm32wg995f256.h.
#define EBI_CODE_MEM_BITS ((uint32_t) 0x28UL) |
EBI_CODE used bits
Definition at line 160 of file efm32wg995f256.h.
#define EBI_CODE_MEM_END ((uint32_t) 0x1FFFFFFFUL) |
EBI_CODE end address
Definition at line 159 of file efm32wg995f256.h.
#define EBI_CODE_MEM_SIZE ((uint32_t) 0xE000000UL) |
EBI_CODE available address space
Definition at line 158 of file efm32wg995f256.h.
#define EBI_MEM_BASE ((uint32_t) 0x80000000UL) |
#define EBI_MEM_BITS ((uint32_t) 0x30UL) |
EBI used bits
Definition at line 176 of file efm32wg995f256.h.
#define EBI_MEM_END ((uint32_t) 0xBFFFFFFFUL) |
EBI end address
Definition at line 175 of file efm32wg995f256.h.
#define EBI_MEM_SIZE ((uint32_t) 0x40000000UL) |
EBI available address space
Definition at line 174 of file efm32wg995f256.h.
#define EXT_IRQ_COUNT 40 |
Number of External (NVIC) interrupts
Definition at line 191 of file efm32wg995f256.h.
Referenced by CORE_GetNvicRamTableHandler(), CORE_IrqIsBlocked(), CORE_NvicIRQDisabled(), CORE_NvicMaskClearIRQ(), CORE_NvicMaskSetIRQ(), and CORE_SetNvicRamTableHandler().
#define FLASH_BASE (0x00000000UL) |
Flash and SRAM limits for EFM32WG995F256 Flash Base Address
Definition at line 183 of file efm32wg995f256.h.
#define FLASH_MEM_BASE ((uint32_t) 0x0UL) |
Memory Base addresses and limits FLASH base address
Definition at line 145 of file efm32wg995f256.h.
#define FLASH_MEM_BITS ((uint32_t) 0x28UL) |
FLASH used bits
Definition at line 148 of file efm32wg995f256.h.
#define FLASH_MEM_END ((uint32_t) 0xFFFFFFFUL) |
FLASH end address
Definition at line 147 of file efm32wg995f256.h.
#define FLASH_MEM_SIZE ((uint32_t) 0x10000000UL) |
FLASH available address space
Definition at line 146 of file efm32wg995f256.h.
#define FLASH_PAGE_SIZE 2048 |
Flash Memory page size
Definition at line 185 of file efm32wg995f256.h.
Referenced by MSC_ErasePage(), and SYSTEM_GetFlashPageSize().
#define FLASH_SIZE (0x00040000UL) |
Available Flash Memory
Definition at line 184 of file efm32wg995f256.h.
#define I2C_COUNT 2 |
2 I2Cs available
Definition at line 216 of file efm32wg995f256.h.
#define I2C_PRESENT |
I2C is available in this part
Definition at line 215 of file efm32wg995f256.h.
#define LETIMER_COUNT 1 |
1 LETIMERs available
Definition at line 212 of file efm32wg995f256.h.
#define LETIMER_PRESENT |
LETIMER is available in this part
Definition at line 211 of file efm32wg995f256.h.
#define LEUART_COUNT 2 |
2 LEUARTs available
Definition at line 210 of file efm32wg995f256.h.
#define LEUART_PRESENT |
LEUART is available in this part
Definition at line 209 of file efm32wg995f256.h.
#define PART_NUMBER "EFM32WG995F256" |
Configure part number Part Number
Definition at line 142 of file efm32wg995f256.h.
#define PCNT_COUNT 3 |
3 PCNTs available
Definition at line 214 of file efm32wg995f256.h.
Referenced by CMU_PCNTClockExternalSet().
#define PCNT_PRESENT |
PCNT is available in this part
Definition at line 213 of file efm32wg995f256.h.
#define PER_MEM_BASE ((uint32_t) 0x40000000UL) |
PER base address
Definition at line 161 of file efm32wg995f256.h.
Referenced by BUS_RegBitRead(), BUS_RegBitWrite(), BUS_RegMaskedClear(), and BUS_RegMaskedSet().
#define PER_MEM_BITS ((uint32_t) 0x20UL) |
PER used bits
Definition at line 164 of file efm32wg995f256.h.
#define PER_MEM_END ((uint32_t) 0x400DFFFFUL) |
PER end address
Definition at line 163 of file efm32wg995f256.h.
#define PER_MEM_SIZE ((uint32_t) 0xE0000UL) |
PER available address space
Definition at line 162 of file efm32wg995f256.h.
#define PRS_CHAN_COUNT 12 |
Number of PRS channels
Definition at line 189 of file efm32wg995f256.h.
Referenced by PRS_SourceAsyncSignalSet(), and PRS_SourceSignalSet().
#define RAM_CODE_MEM_BASE ((uint32_t) 0x10000000UL) |
RAM_CODE base address
Definition at line 169 of file efm32wg995f256.h.
#define RAM_CODE_MEM_BITS ((uint32_t) 0x17UL) |
RAM_CODE used bits
Definition at line 172 of file efm32wg995f256.h.
#define RAM_CODE_MEM_END ((uint32_t) 0x1001FFFFUL) |
RAM_CODE end address
Definition at line 171 of file efm32wg995f256.h.
#define RAM_CODE_MEM_SIZE ((uint32_t) 0x20000UL) |
RAM_CODE available address space
Definition at line 170 of file efm32wg995f256.h.
#define RAM_MEM_BASE ((uint32_t) 0x20000000UL) |
RAM base address
Definition at line 165 of file efm32wg995f256.h.
Referenced by CORE_InitNvicVectorTable(), and EMU_RamPowerDown().
#define RAM_MEM_BITS ((uint32_t) 0x18UL) |
RAM used bits
Definition at line 168 of file efm32wg995f256.h.
#define RAM_MEM_END ((uint32_t) 0x2003FFFFUL) |
RAM end address
Definition at line 167 of file efm32wg995f256.h.
#define RAM_MEM_SIZE ((uint32_t) 0x40000UL) |
RAM available address space
Definition at line 166 of file efm32wg995f256.h.
Referenced by CORE_InitNvicVectorTable().
#define SRAM_BASE (0x20000000UL) |
SRAM Base Address
Definition at line 186 of file efm32wg995f256.h.
Referenced by BUS_RamBitRead(), BUS_RamBitWrite(), and EMU_RamPowerDown().
#define SRAM_SIZE (0x00008000UL) |
Available SRAM Memory
Definition at line 187 of file efm32wg995f256.h.
Referenced by EMU_RamPowerDown().
#define TIMER_COUNT 4 |
4 TIMERs available
Definition at line 206 of file efm32wg995f256.h.
#define TIMER_PRESENT |
TIMER is available in this part
Definition at line 205 of file efm32wg995f256.h.
#define UART_COUNT 2 |
2 UARTs available
Definition at line 204 of file efm32wg995f256.h.
#define UART_PRESENT |
UART is available in this part
Definition at line 203 of file efm32wg995f256.h.
#define USART_COUNT 3 |
3 USARTs available
Definition at line 202 of file efm32wg995f256.h.
#define USART_PRESENT |
USART is available in this part
Definition at line 201 of file efm32wg995f256.h.
#define USBC_MEM_BASE ((uint32_t) 0x40100000UL) |
USBC base address
Definition at line 153 of file efm32wg995f256.h.
#define USBC_MEM_BITS ((uint32_t) 0x18UL) |
USBC used bits
Definition at line 156 of file efm32wg995f256.h.
#define USBC_MEM_END ((uint32_t) 0x4013FFFFUL) |
USBC end address
Definition at line 155 of file efm32wg995f256.h.
#define USBC_MEM_SIZE ((uint32_t) 0x40000UL) |
USBC available address space
Definition at line 154 of file efm32wg995f256.h.