Detailed Description

Digital to Analog Converter (DAC) Peripheral API.

This module contains functions to control the DAC peripheral of Silicon Labs 32-bit MCUs and SoCs. The DAC converts digital values to analog signals at up to 500 ksps with 12-bit accuracy. The DAC is designed for low energy consumption, but can also provide very good performance.

Data Structures
struct	DAC_Init_TypeDef

struct	DAC_InitChannel_TypeDef

Macros
#define	DAC_INIT_DEFAULT

#define	DAC_INITCHANNEL_DEFAULT

Enumerations
enum	DAC_ConvMode_TypeDef { dacConvModeContinuous = _DAC_CTRL_CONVMODE_CONTINUOUS, dacConvModeSampleHold = _DAC_CTRL_CONVMODE_SAMPLEHOLD, dacConvModeSampleOff = _DAC_CTRL_CONVMODE_SAMPLEOFF }

enum	DAC_Output_TypeDef { dacOutputDisable = _DAC_CTRL_OUTMODE_DISABLE, dacOutputPin = _DAC_CTRL_OUTMODE_PIN, dacOutputADC = _DAC_CTRL_OUTMODE_ADC, dacOutputPinADC = _DAC_CTRL_OUTMODE_PINADC }

enum	DAC_PRSSEL_TypeDef { dacPRSSELCh0 = _DAC_CH0CTRL_PRSSEL_PRSCH0, dacPRSSELCh1 = _DAC_CH0CTRL_PRSSEL_PRSCH1, dacPRSSELCh2 = _DAC_CH0CTRL_PRSSEL_PRSCH2, dacPRSSELCh3 = _DAC_CH0CTRL_PRSSEL_PRSCH3, dacPRSSELCh4 = _DAC_CH0CTRL_PRSSEL_PRSCH4, dacPRSSELCh5 = _DAC_CH0CTRL_PRSSEL_PRSCH5, dacPRSSELCh6 = _DAC_CH0CTRL_PRSSEL_PRSCH6, dacPRSSELCh7 = _DAC_CH0CTRL_PRSSEL_PRSCH7, dacPRSSELCh8 = _DAC_CH0CTRL_PRSSEL_PRSCH8, dacPRSSELCh9 = _DAC_CH0CTRL_PRSSEL_PRSCH9, dacPRSSELCh10 = _DAC_CH0CTRL_PRSSEL_PRSCH10, dacPRSSELCh11 = _DAC_CH0CTRL_PRSSEL_PRSCH11 }

enum	DAC_Ref_TypeDef { dacRef1V25 = _DAC_CTRL_REFSEL_1V25, dacRef2V5 = _DAC_CTRL_REFSEL_2V5, dacRefVDD = _DAC_CTRL_REFSEL_VDD }

enum	DAC_Refresh_TypeDef { dacRefresh8 = _DAC_CTRL_REFRSEL_8CYCLES, dacRefresh16 = _DAC_CTRL_REFRSEL_16CYCLES, dacRefresh32 = _DAC_CTRL_REFRSEL_32CYCLES, dacRefresh64 = _DAC_CTRL_REFRSEL_64CYCLES }

Functions
__STATIC_INLINE void	DAC_Channel0OutputSet (DAC_TypeDef *dac, uint32_t value)
	Set the output signal of DAC channel 0 to a given value. More...

__STATIC_INLINE void	DAC_Channel1OutputSet (DAC_TypeDef *dac, uint32_t value)
	Set the output signal of DAC channel 1 to a given value. More...

void	DAC_ChannelOutputSet (DAC_TypeDef *dac, unsigned int channel, uint32_t value)
	Set the output signal of a DAC channel to a given value. More...

void	DAC_Enable (DAC_TypeDef *dac, unsigned int ch, bool enable)
	Enable/disable DAC channel. More...

void	DAC_Init (DAC_TypeDef dac, const DAC_Init_TypeDef init)
	Initialize DAC. More...

void	DAC_InitChannel (DAC_TypeDef dac, const DAC_InitChannel_TypeDef init, unsigned int ch)
	Initialize DAC channel. More...

__STATIC_INLINE void	DAC_IntClear (DAC_TypeDef *dac, uint32_t flags)
	Clear one or more pending DAC interrupts. More...

__STATIC_INLINE void	DAC_IntDisable (DAC_TypeDef *dac, uint32_t flags)
	Disable one or more DAC interrupts. More...

__STATIC_INLINE void	DAC_IntEnable (DAC_TypeDef *dac, uint32_t flags)
	Enable one or more DAC interrupts. More...

__STATIC_INLINE uint32_t	DAC_IntGet (DAC_TypeDef *dac)
	Get pending DAC interrupt flags. More...

__STATIC_INLINE uint32_t	DAC_IntGetEnabled (DAC_TypeDef *dac)
	Get enabled and pending DAC interrupt flags. Useful for handling more interrupt sources in the same interrupt handler. More...

__STATIC_INLINE void	DAC_IntSet (DAC_TypeDef *dac, uint32_t flags)
	Set one or more pending DAC interrupts from SW. More...

uint8_t	DAC_PrescaleCalc (uint32_t dacFreq, uint32_t hfperFreq)
	Calculate prescaler value used to determine DAC clock. More...

void	DAC_Reset (DAC_TypeDef *dac)
	Reset DAC to same state as after a HW reset. More...

Macro Definition Documentation

#define DAC_INIT_DEFAULT

Value:

{                                                                      \
  dacRefresh8,              /* Refresh every 8 prescaled cycles. */    \
  dacRef1V25,               /* 1.25V internal reference. */            \
  dacOutputPin,             /* Output to pin only. */                  \
  dacConvModeContinuous,    /* Continuous mode. */                     \
  0,                        /* No prescaling. */                       \
  false,                    /* Do not enable low pass filter. */       \
  false,                    /* Do not reset prescaler on ch0 start. */ \
  false,                    /* DAC output enable always on. */         \
  false,                    /* Disable sine mode. */                   \
  false                     /* Single ended mode. */                   \
}

Default config for DAC init structure.

Definition at line 182 of file em_dac.h.

#define DAC_INITCHANNEL_DEFAULT

Value:

{                                                                       \
  false,              /* Leave channel disabled when init done. */      \
  false,              /* Disable PRS triggering. */                     \
  false,              /* Channel not refreshed automatically. */        \
  dacPRSSELCh0        /* Select PRS ch0 (if PRS triggering enabled). */ \
}

Default config for DAC channel init structure.

Definition at line 223 of file em_dac.h.

Enumeration Type Documentation

enum DAC_ConvMode_TypeDef

Conversion mode.

Enumerator
dacConvModeContinuous	Continuous mode.
dacConvModeSampleHold	Sample/hold mode.
dacConvModeSampleOff	Sample/shut off mode.

Definition at line 70 of file em_dac.h.

enum DAC_Output_TypeDef

Output mode.

Enumerator
dacOutputDisable	Output to pin and ADC disabled.
dacOutputPin	Output to pin only.
dacOutputADC	Output to ADC only
dacOutputPinADC	Output to pin and ADC.

Definition at line 78 of file em_dac.h.

enum DAC_PRSSEL_TypeDef

Peripheral Reflex System signal used to trigger single sample.

Enumerator
dacPRSSELCh0	PRS channel 0.
dacPRSSELCh1	PRS channel 1.
dacPRSSELCh2	PRS channel 2.
dacPRSSELCh3	PRS channel 3.
dacPRSSELCh4	PRS channel 4.
dacPRSSELCh5	PRS channel 5.
dacPRSSELCh6	PRS channel 6.
dacPRSSELCh7	PRS channel 7.
dacPRSSELCh8	PRS channel 8.
dacPRSSELCh9	PRS channel 9.
dacPRSSELCh10	PRS channel 10.
dacPRSSELCh11	PRS channel 11.

Definition at line 88 of file em_dac.h.

enum DAC_Ref_TypeDef

Reference voltage for DAC.

Enumerator
dacRef1V25	Internal 1.25V bandgap reference.
dacRef2V5	Internal 2.5V bandgap reference.
dacRefVDD	VDD reference.

Definition at line 122 of file em_dac.h.

enum DAC_Refresh_TypeDef

Refresh interval.

Enumerator
dacRefresh8	Refresh every 8 prescaled cycles.
dacRefresh16	Refresh every 16 prescaled cycles.
dacRefresh32	Refresh every 32 prescaled cycles.
dacRefresh64	Refresh every 64 prescaled cycles.

Definition at line 131 of file em_dac.h.

Function Documentation

__STATIC_INLINE void DAC_Channel0OutputSet	(	DAC_TypeDef *	dac,
		uint32_t	value
	)

Set the output signal of DAC channel 0 to a given value.

This function sets the output signal of DAC channel 0 by writing value to the CH0DATA register.

Parameters

[in]	dac	Pointer to DAC peripheral register block.
[in]	value	Value to write to the channel 0 output register CH0DATA.

Definition at line 259 of file em_dac.h.

References _DAC_CH0DATA_MASK, and DAC_TypeDef::CH0DATA.

Referenced by DAC_ChannelOutputSet().

__STATIC_INLINE void DAC_Channel1OutputSet	(	DAC_TypeDef *	dac,
		uint32_t	value
	)

Set the output signal of DAC channel 1 to a given value.

This function sets the output signal of DAC channel 1 by writing value to the CH1DATA register.

Parameters

[in]	dac	Pointer to DAC peripheral register block.
[in]	value	Value to write to the channel 1 output register CH1DATA.

Definition at line 281 of file em_dac.h.

References _DAC_CH1DATA_MASK, and DAC_TypeDef::CH1DATA.

Referenced by DAC_ChannelOutputSet().

void DAC_ChannelOutputSet	(	DAC_TypeDef *	dac,
		unsigned int	channel,
		uint32_t	value
	)

Set the output signal of a DAC channel to a given value.

This function sets the output signal of a DAC channel by writing value to the corresponding CHnDATA register.

Parameters

[in]	dac	Pointer to DAC peripheral register block.
[in]	channel	Channel number to set output of.
[in]	value	Value to write to the channel output register CHnDATA.

Definition at line 247 of file em_dac.c.

References DAC_Channel0OutputSet(), and DAC_Channel1OutputSet().

void DAC_Enable	(	DAC_TypeDef *	dac,
		unsigned int	ch,
		bool	enable
	)

Enable/disable DAC channel.

Parameters

[in]	dac	Pointer to DAC peripheral register block.
[in]	ch	Channel to enable/disable.
[in]	enable	true to enable DAC channel, false to disable.

Definition at line 86 of file em_dac.c.

References _DAC_CH0CTRL_EN_SHIFT, BUS_RegBitWrite(), DAC_TypeDef::CH0CTRL, and DAC_TypeDef::CH1CTRL.

void DAC_Init	(	DAC_TypeDef *	dac,
		const DAC_Init_TypeDef *	init
	)

Initialize DAC.

Initializes common parts for both channels. In addition, channel control configuration must be done, please refer to DAC_InitChannel().

Note: This function will disable both channels prior to configuration.

Parameters

[in]	dac	Pointer to DAC peripheral register block.
[in]	init	Pointer to DAC initialization structure.

Definition at line 123 of file em_dac.c.

References _DAC_CH0CTRL_EN_SHIFT, _DAC_CTRL_CONVMODE_SHIFT, _DAC_CTRL_OUTMODE_SHIFT, _DAC_CTRL_PRESC_MASK, _DAC_CTRL_PRESC_SHIFT, _DAC_CTRL_REFRSEL_SHIFT, _DAC_CTRL_REFSEL_SHIFT, BUS_RegBitWrite(), DAC_TypeDef::CAL, DAC_TypeDef::CH0CTRL, DAC_Init_TypeDef::ch0ResetPre, DAC_TypeDef::CH1CTRL, DAC_Init_TypeDef::convMode, DAC_TypeDef::CTRL, DAC_CTRL_CH0PRESCRST, DAC_CTRL_DIFF, DAC_CTRL_OUTENPRS, DAC_CTRL_SINEMODE, dacRef2V5, dacRefVDD, DEVINFO, DAC_Init_TypeDef::diff, DAC_Init_TypeDef::outEnablePRS, DAC_Init_TypeDef::outMode, DAC_Init_TypeDef::prescale, DAC_Init_TypeDef::reference, DAC_Init_TypeDef::refresh, and DAC_Init_TypeDef::sineEnable.

void DAC_InitChannel	(	DAC_TypeDef *	dac,
		const DAC_InitChannel_TypeDef *	init,
		unsigned int	ch
	)

Initialize DAC channel.

Parameters

[in]	dac	Pointer to DAC peripheral register block.
[in]	init	Pointer to DAC initialization structure.
[in]	ch	Channel number to initialize.

Definition at line 193 of file em_dac.c.

References _DAC_CH0CTRL_PRSSEL_SHIFT, DAC_TypeDef::CH0CTRL, DAC_TypeDef::CH1CTRL, DAC_CH0CTRL_EN, DAC_CH0CTRL_PRSEN, DAC_CH0CTRL_REFREN, DAC_InitChannel_TypeDef::enable, DAC_InitChannel_TypeDef::prsEnable, DAC_InitChannel_TypeDef::prsSel, and DAC_InitChannel_TypeDef::refreshEnable.

__STATIC_INLINE void DAC_IntClear	(	DAC_TypeDef *	dac,
		uint32_t	flags
	)

Clear one or more pending DAC interrupts.

Parameters

[in]	dac	Pointer to DAC peripheral register block.
[in]	flags	Pending DAC interrupt source to clear. Use a bitwise logic OR combination of valid interrupt flags for the DAC module (DAC_IF_nnn).

Definition at line 300 of file em_dac.h.

References DAC_TypeDef::IFC.

__STATIC_INLINE void DAC_IntDisable	(	DAC_TypeDef *	dac,
		uint32_t	flags
	)

Disable one or more DAC interrupts.

Parameters

[in]	dac	Pointer to DAC peripheral register block.
[in]	flags	DAC interrupt sources to disable. Use a bitwise logic OR combination of valid interrupt flags for the DAC module (DAC_IF_nnn).

Definition at line 317 of file em_dac.h.

References DAC_TypeDef::IEN.

__STATIC_INLINE void DAC_IntEnable	(	DAC_TypeDef *	dac,
		uint32_t	flags
	)

Enable one or more DAC interrupts.

Note: Depending on the use, a pending interrupt may already be set prior to enabling the interrupt. Consider using DAC_IntClear() prior to enabling if such a pending interrupt should be ignored.

Parameters

[in]	dac	Pointer to DAC peripheral register block.
[in]	flags	DAC interrupt sources to enable. Use a bitwise logic OR combination of valid interrupt flags for the DAC module (DAC_IF_nnn).

Definition at line 339 of file em_dac.h.

References DAC_TypeDef::IEN.

__STATIC_INLINE uint32_t DAC_IntGet ( DAC_TypeDef * dac )

Get pending DAC interrupt flags.

Note: The event bits are not cleared by the use of this function.

Parameters

[in] dac Pointer to DAC peripheral register block.

Returns: DAC interrupt sources pending. A bitwise logic OR combination of valid interrupt flags for the DAC module (DAC_IF_nnn).

Definition at line 359 of file em_dac.h.

References DAC_TypeDef::IF.

__STATIC_INLINE uint32_t DAC_IntGetEnabled ( DAC_TypeDef * dac )

Get enabled and pending DAC interrupt flags. Useful for handling more interrupt sources in the same interrupt handler.

Parameters

[in] dac Pointer to DAC peripheral register block.

Note: Interrupt flags are not cleared by the use of this function.

Returns

Pending and enabled DAC interrupt sources. The return value is the bitwise AND combination of

the OR combination of enabled interrupt sources in DACx_IEN_nnn register (DACx_IEN_nnn) and
the OR combination of valid interrupt flags of the DAC module (DACx_IF_nnn).

Definition at line 384 of file em_dac.h.

References DAC_TypeDef::IEN, and DAC_TypeDef::IF.

__STATIC_INLINE void DAC_IntSet	(	DAC_TypeDef *	dac,
		uint32_t	flags
	)

Set one or more pending DAC interrupts from SW.

Parameters

[in]	dac	Pointer to DAC peripheral register block.
[in]	flags	DAC interrupt sources to set to pending. Use a bitwise logic OR combination of valid interrupt flags for the DAC module (DAC_IF_nnn).

Definition at line 408 of file em_dac.h.

References DAC_TypeDef::IFS.

uint8_t DAC_PrescaleCalc	(	uint32_t	dacFreq,
		uint32_t	hfperFreq
	)

Calculate prescaler value used to determine DAC clock.

The DAC clock is given by: HFPERCLK / (prescale ^ 2). If the requested DAC frequency is low and the max prescaler value can not adjust the actual DAC frequency lower than the requested DAC frequency, then the max prescaler value is returned, resulting in a higher DAC frequency than requested.

Parameters

[in]	dacFreq	DAC frequency wanted. The frequency will automatically be adjusted to be below max allowed DAC clock.
[in]	hfperFreq	Frequency in Hz of reference HFPER clock. Set to 0 to use currently defined HFPER clock setting.

Returns: Prescaler value to use for DAC in order to achieve a clock value <= dacFreq.

Definition at line 287 of file em_dac.c.

References _DAC_CTRL_PRESC_MASK, _DAC_CTRL_PRESC_SHIFT, CMU_ClockFreqGet(), and cmuClock_HFPER.

void DAC_Reset ( DAC_TypeDef * dac )

Reset DAC to same state as after a HW reset.

Parameters

[in] dac Pointer to ADC peripheral register block.

Definition at line 330 of file em_dac.c.

References _DAC_BIASPROG_RESETVALUE, _DAC_CH0CTRL_RESETVALUE, _DAC_CH1CTRL_RESETVALUE, _DAC_CTRL_RESETVALUE, _DAC_IEN_RESETVALUE, _DAC_IFC_MASK, DAC_TypeDef::BIASPROG, DAC_TypeDef::CAL, DAC_TypeDef::CH0CTRL, DAC_TypeDef::CH1CTRL, DAC_TypeDef::CTRL, DEVINFO, DAC_TypeDef::IEN, and DAC_TypeDef::IFC.

Detailed Description

Data Structures

Macros

Enumerations

Functions

Macro Definition Documentation

Enumeration Type Documentation

Function Documentation