Detailed Description

Energy management unit (EMU) peripheral API.

Version: 5.1.2

License

Permission is granted to anyone to use this software for any purpose, including commercial applications, and to alter it and redistribute it freely, subject to the following restrictions:

The origin of this software must not be misrepresented; you must not claim that you wrote the original software.
Altered source versions must be plainly marked as such, and must not be misrepresented as being the original software.
This notice may not be removed or altered from any source distribution.

DISCLAIMER OF WARRANTY/LIMITATION OF REMEDIES: Silicon Labs has no obligation to support this Software. Silicon Labs is providing the Software "AS IS", with no express or implied warranties of any kind, including, but not limited to, any implied warranties of merchantability or fitness for any particular purpose or warranties against infringement of any proprietary rights of a third party.

Silicon Labs will not be liable for any consequential, incidental, or special damages, or any other relief, or for any claim by any third party, arising from your use of this Software.

Definition in file em_emu.h.

#include "em_device.h"
#include <stdbool.h>
#include "em_bus.h"

Go to the source code of this file.

Data Structures
struct	EMU_EM23Init_TypeDef

Macros
#define	EMU_EM23INIT_DEFAULT

Enumerations
enum	EMU_BODMode_TypeDef { emuBODMode_Active, emuBODMode_Inactive }

enum	EMU_PowerConfig_TypeDef { emuPowerConfig_DcdcToDvdd }

Functions
void	EMU_EM23Init (const EMU_EM23Init_TypeDef *em23Init)
	Update EMU module with Energy Mode 2 and 3 configuration. More...

__STATIC_INLINE void	EMU_EM2Block (void)
	Block entering EM2 or higher number energy modes.

__STATIC_INLINE void	EMU_EM2UnBlock (void)
	Unblock entering EM2 or higher number energy modes.

__STATIC_INLINE void	EMU_EnterEM1 (void)
	Enter energy mode 1 (EM1).

void	EMU_EnterEM2 (bool restore)
	Enter energy mode 2 (EM2). More...

void	EMU_EnterEM3 (bool restore)
	Enter energy mode 3 (EM3). More...

void	EMU_EnterEM4 (void)
	Enter energy mode 4 (EM4). More...

__STATIC_INLINE void	EMU_Lock (void)
	Lock the EMU in order to protect its registers against unintended modification. More...

void	EMU_MemPwrDown (uint32_t blocks)
	Power down memory block. More...

void	EMU_RamPowerDown (uint32_t start, uint32_t end)
	Power down RAM memory blocks. More...

void	EMU_Restore (void)
	Restore CMU HF clock select state, oscillator enable and voltage scaling (if available) after EMU_EnterEM2() or EMU_EnterEM3() are called with the restore parameter set to false. Calling this function is equivalent to calling EMU_EnterEM2() or EMU_EnterEM3() with the restore parameter set to true, but it allows the application to evaluate the wakeup reason before restoring state.

__STATIC_INLINE void	EMU_Unlock (void)
	Unlock the EMU so that writing to locked registers again is possible.

void	EMU_UpdateOscConfig (void)
	Update EMU module with CMU oscillator selection/enable status. More...

Detailed Description

License

Data Structures

Macros

Enumerations

Functions