|
EZR32 Wonder Gecko Software Documentation
ezr32wg-doc-5.1.2
|
|
EZR32 Wonder Gecko Software Documentation
ezr32wg-doc-5.1.2
|
Power and Interrupt Controller register and bitfield definitions.
| #define BOARD_PIC_NUM_APP_REGS 9 |
Number of application registers
Definition at line 41 of file board_pic_regs.h.
Referenced by BOARD_init().
| #define BOARD_PIC_NUM_SYS_REGS 13 |
Number of system registers
Definition at line 62 of file board_pic_regs.h.
| #define BOARD_PIC_REG_BOARD_REV 0xFC |
Board revision ID register
Definition at line 59 of file board_pic_regs.h.
Referenced by BOARD_picGetHwRevision().
| #define BOARD_PIC_REG_CCS_CTRL 0x03 |
CCS811 control register
Definition at line 34 of file board_pic_regs.h.
Referenced by BOARD_gasSensorEnable(), and BOARD_gasSensorWake().
| #define BOARD_PIC_REG_CCS_CTRL_EN 0x01 |
CCS811 control register, Enable bit
Definition at line 75 of file board_pic_regs.h.
Referenced by BOARD_gasSensorEnable(), and BOARD_gasSensorWake().
| #define BOARD_PIC_REG_CCS_CTRL_WAKE 0x02 |
CCS811 control register, Wake-up bit
Definition at line 76 of file board_pic_regs.h.
Referenced by BOARD_gasSensorWake().
| #define BOARD_PIC_REG_DEVICE_ID0 0xF8 |
Device ID register, byte 0
Definition at line 54 of file board_pic_regs.h.
Referenced by BOARD_picGetDeviceId().
| #define BOARD_PIC_REG_DEVICE_ID1 0xF9 |
Device ID register, byte 1
Definition at line 55 of file board_pic_regs.h.
Referenced by BOARD_picGetDeviceId().
| #define BOARD_PIC_REG_DEVICE_ID2 0xFA |
Device ID register, byte 2
Definition at line 56 of file board_pic_regs.h.
Referenced by BOARD_picGetDeviceId().
| #define BOARD_PIC_REG_DEVICE_ID3 0xFB |
Device ID register, byte 3
Definition at line 57 of file board_pic_regs.h.
Referenced by BOARD_picGetDeviceId().
| #define BOARD_PIC_REG_ENV_SENSOR_CTRL 0x01 |
Environmental sensor group control register
Definition at line 32 of file board_pic_regs.h.
Referenced by BOARD_envSensEnable().
| #define BOARD_PIC_REG_ENV_SENSOR_CTRL_EN 0x01 |
Environmental sensor group control register, Enable bit
Definition at line 69 of file board_pic_regs.h.
| #define BOARD_PIC_REG_IMU_CTRL 0x00 |
IMU control register
Definition at line 31 of file board_pic_regs.h.
Referenced by BOARD_imuEnable().
| #define BOARD_PIC_REG_IMU_CTRL_EN 0x01 |
IMU control register, Enable bit
Definition at line 66 of file board_pic_regs.h.
| #define BOARD_PIC_REG_INT_CLEAR 0x06 |
Interrupt clear register
Definition at line 37 of file board_pic_regs.h.
Referenced by BOARD_picIntClear(), IMU_clearDataReadyFlag(), and IMU_config().
| #define BOARD_PIC_REG_INT_CLEAR_CCS811 0x01 |
Interrupt clear register, CSS811 INT clear bit
Definition at line 98 of file board_pic_regs.h.
| #define BOARD_PIC_REG_INT_CLEAR_IMU 0x02 |
Interrupt clear register, IMU INT clear bit
Definition at line 99 of file board_pic_regs.h.
| #define BOARD_PIC_REG_INT_CLEAR_UV_ALS 0x04 |
Interrupt clear register, UV/ALS INT clear bit
Definition at line 100 of file board_pic_regs.h.
| #define BOARD_PIC_REG_INT_CTRL 0x08 |
Interrupt options register
Definition at line 39 of file board_pic_regs.h.
| #define BOARD_PIC_REG_INT_CTRL_LEGACY_MODE 0x20 |
Interrupt control register, legacy level interrupts
Definition at line 106 of file board_pic_regs.h.
| #define BOARD_PIC_REG_INT_CTRL_TIMER_ENABLE 0x10 |
Interrupt control register, Periodic timer enable
Definition at line 105 of file board_pic_regs.h.
| #define BOARD_PIC_REG_INT_CTRL_TIMER_MASK 0x0F |
Interrupt control register, TIMER period mask
Definition at line 103 of file board_pic_regs.h.
| #define BOARD_PIC_REG_INT_CTRL_TIMER_SHIFT 0 |
Interrupt control register, TIMER period shift
Definition at line 104 of file board_pic_regs.h.
| #define BOARD_PIC_REG_INT_ENABLE 0x05 |
Interrupt enable register
Definition at line 36 of file board_pic_regs.h.
Referenced by BOARD_envSensEnableIRQ(), BOARD_gasSensorEnableIRQ(), and BOARD_imuEnableIRQ().
| #define BOARD_PIC_REG_INT_ENABLE_CCS811 0x01 |
Interrupt enable register, CSS811 INT enable bit
Definition at line 88 of file board_pic_regs.h.
Referenced by BOARD_gasSensorEnableIRQ().
| #define BOARD_PIC_REG_INT_ENABLE_IMU 0x02 |
Interrupt enable register, IMU INT enable bit
Definition at line 89 of file board_pic_regs.h.
Referenced by BOARD_imuEnableIRQ().
| #define BOARD_PIC_REG_INT_ENABLE_UV_ALS 0x04 |
Interrupt enable register, UV/ALS INT enable bit
Definition at line 90 of file board_pic_regs.h.
Referenced by BOARD_envSensEnableIRQ().
| #define BOARD_PIC_REG_INT_FLAG 0x07 |
Interrupt flag register
Definition at line 38 of file board_pic_regs.h.
Referenced by BOARD_picIntGet().
| #define BOARD_PIC_REG_INT_FLAG_CCS811 0x01 |
Interrupt flag register, CSS811 INT flag bit
Definition at line 93 of file board_pic_regs.h.
| #define BOARD_PIC_REG_INT_FLAG_IMU 0x02 |
Interrupt flag register, IMU INT flag bit
Definition at line 94 of file board_pic_regs.h.
| #define BOARD_PIC_REG_INT_FLAG_UV_ALS 0x04 |
Interrupt flag register, UV/ALS INT flag bit
Definition at line 95 of file board_pic_regs.h.
| #define BOARD_PIC_REG_LED_CTRL 0x04 |
LED control register
Definition at line 35 of file board_pic_regs.h.
Referenced by BOARD_rgbledEnable(), and BOARD_rgbledPowerEnable().
| #define BOARD_PIC_REG_LED_CTRL_LED0 0x10 |
LED control register, LED0 control bit
Definition at line 80 of file board_pic_regs.h.
| #define BOARD_PIC_REG_LED_CTRL_LED1 0x20 |
LED control register, LED1 control bit
Definition at line 81 of file board_pic_regs.h.
| #define BOARD_PIC_REG_LED_CTRL_LED2 0x40 |
LED control register, LED2 control bit
Definition at line 82 of file board_pic_regs.h.
| #define BOARD_PIC_REG_LED_CTRL_LED3 0x80 |
LED control register, LED3 control bit
Definition at line 83 of file board_pic_regs.h.
| #define BOARD_PIC_REG_LED_CTRL_LED_MASK 0xf0 |
LED control register, LED control mask
Definition at line 84 of file board_pic_regs.h.
Referenced by BOARD_rgbledEnable().
| #define BOARD_PIC_REG_LED_CTRL_LED_SHIFT 4 |
LED control register, LED control shift value
Definition at line 85 of file board_pic_regs.h.
Referenced by BOARD_rgbledEnable().
| #define BOARD_PIC_REG_LED_CTRL_PWR_EN 0x01 |
LED control register, Power enable bit
Definition at line 79 of file board_pic_regs.h.
Referenced by BOARD_rgbledPowerEnable().
| #define BOARD_PIC_REG_MIC_CTRL 0x02 |
Microphone control register
Definition at line 33 of file board_pic_regs.h.
Referenced by BOARD_micEnable().
| #define BOARD_PIC_REG_MIC_CTRL_EN 0x01 |
Microphone control register, Enable bit
Definition at line 72 of file board_pic_regs.h.
| #define BOARD_PIC_REG_SCRATCH0 0xF4 |
Scratchpad0 register
Definition at line 49 of file board_pic_regs.h.
| #define BOARD_PIC_REG_SCRATCH1 0xF5 |
Scratchpad1 register
Definition at line 50 of file board_pic_regs.h.
| #define BOARD_PIC_REG_SCRATCH2 0xF6 |
Scratchpad2 register
Definition at line 51 of file board_pic_regs.h.
| #define BOARD_PIC_REG_SCRATCH3 0xF7 |
Scratchpad3 register
Definition at line 52 of file board_pic_regs.h.
| #define BOARD_PIC_REG_SYS_CMD 0xF0 |
System command register
Definition at line 44 of file board_pic_regs.h.
| #define BOARD_PIC_REG_SYS_CMD_BOOTMODE 0xA5 |
System command register, Bootmode command
Definition at line 108 of file board_pic_regs.h.
| #define BOARD_PIC_REG_VERSION_MAJOR 0xF1 |
Major version register
Definition at line 45 of file board_pic_regs.h.
Referenced by BOARD_picGetFwRevision().
| #define BOARD_PIC_REG_VERSION_MINOR 0xF2 |
Minor version register
Definition at line 46 of file board_pic_regs.h.
Referenced by BOARD_picGetFwRevision().
| #define BOARD_PIC_REG_VERSION_PATCH 0xF3 |
Patch version register
Definition at line 47 of file board_pic_regs.h.
Referenced by BOARD_picGetFwRevision().
| #define BOARD_PIC_SYS_REG_START 0xF0 |
Start address of system register
Definition at line 61 of file board_pic_regs.h.
1.8.10 
