ezradio_api_lib.h

Go to the documentation of this file.

/**************************************************************************/
#ifndef _EZRADIO_API_LIB_H_
#define _EZRADIO_API_LIB_H_

#ifdef __cplusplus
extern "C" {
#endif

/***************************************************************************/
/***************************************************************************/
/***************************************************************************/
#define EZRADIO_FIFO_SIZE       64

typedef enum
{
    EZRADIO_CONFIG_SUCCESS,       
    EZRADIO_CONFIG_NO_PATCH,      
    EZRADIO_CONFIG_CTS_TIMEOUT,   
    EZRADIO_CONFIG_PATCH_FAIL,    
    EZRADIO_CONFIG_COMMAND_ERROR  
} EZRADIO_ConfigRet_t;

/* Minimal driver support functions */
void ezradio_reset(void);
void ezradio_power_up(uint8_t boot_options, uint8_t xtal_options, uint32_t xo_freq);

void ezradio_part_info(ezradio_cmd_reply_t *ezradioReply);

void ezradio_start_tx(uint8_t channel, uint8_t condition, uint16_t tx_len);
void ezradio_start_rx(uint8_t channel, uint8_t condition, uint16_t rx_len, uint8_t next_state1, uint8_t next_state2, uint8_t next_state3);

void ezradio_get_int_status(uint8_t ph_clr_pend, uint8_t modem_clr_pend, uint8_t chip_clr_pend, ezradio_cmd_reply_t *ezradioReply);

void ezradio_gpio_pin_cfg(uint8_t gpio0, uint8_t gpio1, uint8_t gpio2, uint8_t gpio3, uint8_t nirq, uint8_t sdo, uint8_t gen_config,
    ezradio_cmd_reply_t *ezradioReply);

void ezradio_set_property( uint8_t group, uint8_t num_props, uint8_t start_prop, ... );

void ezradio_change_state(uint8_t next_state1);

#ifdef EZRADIO_DRIVER_EXTENDED_SUPPORT
/* Extended driver support functions */
void ezradio_nop(void);

void ezradio_fifo_info(uint8_t fifo, ezradio_cmd_reply_t *ezradioReply);

void ezradio_write_tx_fifo( uint8_t numbytes, uint8_t* pdata );
void ezradio_read_rx_fifo( uint8_t numbytes, uint8_t* prxdata );

void ezradio_get_property(uint8_t group, uint8_t num_props, uint8_t start_prop, ezradio_cmd_reply_t *ezradioReply);

#ifdef EZRADIO_DRIVER_FULL_SUPPORT
/* Full driver support functions */

void ezradio_func_info(ezradio_cmd_reply_t *ezradioReply);

void ezradio_frr_a_read(uint8_t respByteCount, ezradio_cmd_reply_t *ezradioReply);
void ezradio_frr_b_read(uint8_t respByteCount, ezradio_cmd_reply_t *ezradioReply);
void ezradio_frr_c_read(uint8_t respByteCount, ezradio_cmd_reply_t *ezradioReply);
void ezradio_frr_d_read(uint8_t respByteCount, ezradio_cmd_reply_t *ezradioReply);

void ezradio_request_device_state(ezradio_cmd_reply_t *ezradioReply);
void ezradio_read_cmd_buff(ezradio_cmd_reply_t *ezradioReply);

void ezradio_get_ph_status(uint8_t ph_clr_pend, ezradio_cmd_reply_t *ezradioReply);
void ezradio_get_modem_status( uint8_t modem_clr_pend, ezradio_cmd_reply_t *ezradioReply);
void ezradio_get_chip_status( uint8_t chip_clr_pend, ezradio_cmd_reply_t *ezradioReply);

void ezradio_get_packet_info(uint8_t field_number_mask, uint16_t len, int16_t diff_len, ezradio_cmd_reply_t *ezradioReply);

void ezradio_start_tx_fast( void );
void ezradio_start_rx_fast( void );

void ezradio_get_int_status_fast_clear( void );
void ezradio_get_int_status_fast_clear_read(ezradio_cmd_reply_t *ezradioReply);

void ezradio_gpio_pin_cfg_fast(ezradio_cmd_reply_t *ezradioReply);

void ezradio_get_ph_status_fast_clear( void );
void ezradio_get_ph_status_fast_clear_read(ezradio_cmd_reply_t *ezradioReply);

void ezradio_get_modem_status_fast_clear( void );
void ezradio_get_modem_status_fast_clear_read(ezradio_cmd_reply_t *ezradioReply);

void ezradio_get_chip_status_fast_clear( void );
void ezradio_get_chip_status_fast_clear_read(ezradio_cmd_reply_t *ezradioReply);

void ezradio_fifo_info_fast_reset(uint8_t fifo);
void ezradio_fifo_info_fast_read(ezradio_cmd_reply_t *ezradioReply);

#endif /* EZRADIO_DRIVER_FULL_SUPPORT */
#endif /* EZRADIO_DRIVER_EXTENDED_SUPPORT */

#ifdef __cplusplus
}
#endif

#endif //_EZRADIO_API_LIB_H_