EFR32 Mighty Gecko 1 Software Documentation  efr32mg1-doc-5.1.2
I2C_TransferSeq_TypeDef Struct Reference

Detailed Description

Master mode transfer message structure used to define a complete I2C transfer sequence (from start to stop).

The structure allows for defining the following types of sequences, please refer to defines for sequence details.

Definition at line 252 of file em_i2c.h.

#include <em_i2c.h>

Data Fields

uint16_t addr
 Address to use after (repeated) start. More...
 
struct {
   uint8_t *   data
 
   uint16_t   len
 
buf [2]
 
uint16_t flags
 

Field Documentation

uint16_t I2C_TransferSeq_TypeDef::len

Number of bytes in data to send or receive. Notice that when receiving data to this buffer, at least 1 byte must be received. Setting len to 0 in the receive case is considered a usage fault. Transmitting 0 bytes is legal, in which case only the address is transmitted after the start condition.

Definition at line 283 of file em_i2c.h.

Referenced by CCS811_getMeasurement(), CCS811_getRawData(), CCS811_readMailbox(), CCS811_setEnvData(), CCS811_setMeasureMode(), CCS811_softwareReset(), EEPROM_AckPoll(), EEPROM_Read(), EEPROM_Write(), I2C_Transfer(), I2C_TransferInit(), performI2CTransfer(), SI1133_registerBlockRead(), SI1133_registerBlockWrite(), SI1133_registerRead(), SI1133_registerWrite(), Si1147_Read_Block_Register(), Si1147_Read_Register(), Si1147_Write_Block_Register(), Si1147_Write_Register(), Si7013_Detect(), Si7013_GetFirmwareRevision(), SI7021_cmdRead(), SI7021_cmdWrite(), SI7210_regRead(), SI7210_regWrite(), TEMPSENS_RegisterGet(), and TEMPSENS_RegisterSet().


The documentation for this struct was generated from the following file: