Detailed Description

Definition at line 41 of file efr32mg1p_adc.h.

Data Fields
__IM uint32_t	APORTCONFLICT

__IOM uint32_t	APORTMASTERDIS

__IM uint32_t	APORTREQ

__IOM uint32_t	BIASPROG

__IOM uint32_t	CAL

__IOM uint32_t	CMD

__IOM uint32_t	CMPTHR

__IOM uint32_t	CTRL

__IOM uint32_t	IEN

__IM uint32_t	IF

__IOM uint32_t	IFC

__IOM uint32_t	IFS

uint32_t	RESERVED0 [1]

uint32_t	RESERVED1 [4]

uint32_t	RESERVED2 [3]

__IOM uint32_t	SCANCTRL

__IOM uint32_t	SCANCTRLX

__IM uint32_t	SCANDATA

__IM uint32_t	SCANDATAP

__IM uint32_t	SCANDATAX

__IM uint32_t	SCANDATAXP

__IOM uint32_t	SCANFIFOCLEAR

__IM uint32_t	SCANFIFOCOUNT

__IOM uint32_t	SCANINPUTSEL

__IOM uint32_t	SCANMASK

__IOM uint32_t	SCANNEGSEL

__IOM uint32_t	SINGLECTRL

__IOM uint32_t	SINGLECTRLX

__IM uint32_t	SINGLEDATA

__IM uint32_t	SINGLEDATAP

__IOM uint32_t	SINGLEFIFOCLEAR

__IM uint32_t	SINGLEFIFOCOUNT

__IM uint32_t	STATUS

Field Documentation

__IM uint32_t ADC_TypeDef::APORTCONFLICT

APORT Conflict Status Register

Definition at line 71 of file efr32mg1p_adc.h.

__IOM uint32_t ADC_TypeDef::APORTMASTERDIS

APORT Bus Master Disable Register

Definition at line 76 of file efr32mg1p_adc.h.

__IM uint32_t ADC_TypeDef::APORTREQ

APORT Request Status Register

Definition at line 70 of file efr32mg1p_adc.h.

__IOM uint32_t ADC_TypeDef::BIASPROG

Bias Programming Register for various analog blocks used in ADC operation.

Definition at line 55 of file efr32mg1p_adc.h.

Referenced by ADC_InitSingle(), and ADC_Reset().

__IOM uint32_t ADC_TypeDef::CAL

Calibration Register

Definition at line 56 of file efr32mg1p_adc.h.

__IOM uint32_t ADC_TypeDef::CMD

Command Register

Definition at line 45 of file efr32mg1p_adc.h.

Referenced by ADC_Init(), ADC_InitScan(), ADC_InitSingle(), ADC_Reset(), and ADC_Start().

__IOM uint32_t ADC_TypeDef::CMPTHR

Compare Threshold Register

Definition at line 54 of file efr32mg1p_adc.h.

__IOM uint32_t ADC_TypeDef::CTRL

Control Register

Definition at line 43 of file efr32mg1p_adc.h.

Referenced by ADC_Init(), ADC_InitScan(), ADC_InitSingle(), and ADC_Reset().

__IOM uint32_t ADC_TypeDef::IEN

Interrupt Enable Register

Definition at line 60 of file efr32mg1p_adc.h.

Referenced by ADC_IntDisable(), ADC_IntEnable(), ADC_IntGetEnabled(), and ADC_Reset().

__IM uint32_t ADC_TypeDef::IF

Interrupt Flag Register

Definition at line 57 of file efr32mg1p_adc.h.

Referenced by ADC_IntGet(), and ADC_IntGetEnabled().

__IOM uint32_t ADC_TypeDef::IFC

Interrupt Flag Clear Register

Definition at line 59 of file efr32mg1p_adc.h.

Referenced by ADC_IntClear(), and ADC_Reset().

__IOM uint32_t ADC_TypeDef::IFS

Interrupt Flag Set Register

Definition at line 58 of file efr32mg1p_adc.h.

Referenced by ADC_IntSet().

uint32_t ADC_TypeDef::RESERVED0[1]

Reserved for future use

Definition at line 44 of file efr32mg1p_adc.h.

uint32_t ADC_TypeDef::RESERVED1[4]

Reserved for future use

Definition at line 65 of file efr32mg1p_adc.h.

uint32_t ADC_TypeDef::RESERVED2[3]

Reserved for future use

Definition at line 69 of file efr32mg1p_adc.h.

__IOM uint32_t ADC_TypeDef::SCANCTRL

Scan Control Register

Definition at line 49 of file efr32mg1p_adc.h.

Referenced by ADC_InitScan(), and ADC_Reset().

__IOM uint32_t ADC_TypeDef::SCANCTRLX

Scan Control Register continued

Definition at line 50 of file efr32mg1p_adc.h.

Referenced by ADC_InitScan(), and ADC_Reset().

__IM uint32_t ADC_TypeDef::SCANDATA

Scan Conversion Result Data

Definition at line 62 of file efr32mg1p_adc.h.

Referenced by ADC_DataScanGet().

__IM uint32_t ADC_TypeDef::SCANDATAP

Scan Sequence Result Data Peek Register

Definition at line 64 of file efr32mg1p_adc.h.

Referenced by ADC_DataScanPeek().

__IM uint32_t ADC_TypeDef::SCANDATAX

Scan Sequence Result Data + Data Source Register

Definition at line 66 of file efr32mg1p_adc.h.

Referenced by ADC_DataIdScanGet().

__IM uint32_t ADC_TypeDef::SCANDATAXP

Scan Sequence Result Data + Data Source Peek Register

Definition at line 67 of file efr32mg1p_adc.h.

__IOM uint32_t ADC_TypeDef::SCANFIFOCLEAR

Scan FIFO Clear Register

Definition at line 75 of file efr32mg1p_adc.h.

Referenced by ADC_Reset().

__IM uint32_t ADC_TypeDef::SCANFIFOCOUNT

Scan FIFO Count Register

Definition at line 73 of file efr32mg1p_adc.h.

__IOM uint32_t ADC_TypeDef::SCANINPUTSEL

Input Selection register for Scan mode

Definition at line 52 of file efr32mg1p_adc.h.

Referenced by ADC_InitScan(), and ADC_Reset().

__IOM uint32_t ADC_TypeDef::SCANMASK

Scan Sequence Input Mask Register

Definition at line 51 of file efr32mg1p_adc.h.

Referenced by ADC_InitScan(), and ADC_Reset().

__IOM uint32_t ADC_TypeDef::SCANNEGSEL

Negative Input select register for Scan

Definition at line 53 of file efr32mg1p_adc.h.

Referenced by ADC_InitScan(), and ADC_Reset().

__IOM uint32_t ADC_TypeDef::SINGLECTRL

Single Channel Control Register

Definition at line 47 of file efr32mg1p_adc.h.

Referenced by ADC_InitSingle(), and ADC_Reset().

__IOM uint32_t ADC_TypeDef::SINGLECTRLX

Single Channel Control Register continued

Definition at line 48 of file efr32mg1p_adc.h.

Referenced by ADC_InitSingle(), and ADC_Reset().

__IM uint32_t ADC_TypeDef::SINGLEDATA

Single Conversion Result Data

Definition at line 61 of file efr32mg1p_adc.h.

Referenced by ADC_DataSingleGet().

__IM uint32_t ADC_TypeDef::SINGLEDATAP

Single Conversion Result Data Peek Register

Definition at line 63 of file efr32mg1p_adc.h.

Referenced by ADC_DataSinglePeek().

__IOM uint32_t ADC_TypeDef::SINGLEFIFOCLEAR

Single FIFO Clear Register

Definition at line 74 of file efr32mg1p_adc.h.

Referenced by ADC_Reset().

__IM uint32_t ADC_TypeDef::SINGLEFIFOCOUNT

Single FIFO Count Register

Definition at line 72 of file efr32mg1p_adc.h.

__IM uint32_t ADC_TypeDef::STATUS

Status Register

Definition at line 46 of file efr32mg1p_adc.h.

Referenced by ADC_InitScan(), and ADC_InitSingle().

The documentation for this struct was generated from the following file:

D:/jenkins-slave/workspaces/Executor-0/super/platform/Device/SiliconLabs/EFR32MG1P/Include/efr32mg1p_adc.h

Detailed Description

Data Fields

Field Documentation