EFR32 Mighty Gecko 1 Software Documentation  efr32mg1-doc-5.1.2

Detailed Description

Si1133 command macro definitions.

Macros

#define SI1133_CMD_FORCE_CH   0x11
 
#define SI1133_CMD_NEW_ADDR   0x02
 
#define SI1133_CMD_PARAM_QUERY   0x40
 
#define SI1133_CMD_PARAM_SET   0x80
 
#define SI1133_CMD_PAUSE_CH   0x12
 
#define SI1133_CMD_RESET   0x01
 
#define SI1133_CMD_RESET_CMD_CTR   0x00
 
#define SI1133_CMD_START   0x13
 

Macro Definition Documentation

#define SI1133_CMD_FORCE_CH   0x11

Initiates a set of measurements specified in CHAN_LIST parameter

Definition at line 220 of file si1133.h.

Referenced by SI1133_measurementForce().

#define SI1133_CMD_NEW_ADDR   0x02

Stores the new I2C address

Definition at line 219 of file si1133.h.

#define SI1133_CMD_PARAM_QUERY   0x40

Reads a parameter

Definition at line 224 of file si1133.h.

#define SI1133_CMD_PARAM_SET   0x80

Sets a parameter

Definition at line 223 of file si1133.h.

#define SI1133_CMD_PAUSE_CH   0x12

Pauses autonomous measurements

Definition at line 221 of file si1133.h.

Referenced by SI1133_measurementPause().

#define SI1133_CMD_RESET   0x01

Forces a Reset

Definition at line 218 of file si1133.h.

Referenced by SI1133_reset().

#define SI1133_CMD_RESET_CMD_CTR   0x00

Resets the command counter

Definition at line 217 of file si1133.h.

Referenced by SI1133_resetCmdCtr(), and SI1133_sendCmd().

#define SI1133_CMD_START   0x13

Starts autonomous measurements

Definition at line 222 of file si1133.h.

Referenced by SI1133_measurementStart().