EFR32 Blue Gecko 12 Software Documentation  efr32bg12-doc-5.1.2
si7210.c File Reference

Detailed Description

Driver for the Silicon Labs Si7210 Hall Effect Sensor.

Version
5.1.1

License

Copyright 2016 Silicon Laboratories, Inc. http://www.silabs.com

This file is licensed under the Silicon Labs License Agreement. See the file "Silabs_License_Agreement.txt" for details. Before using this software for any purpose, you must agree to the terms of that agreement.

Definition in file si7210.c.

#include <stddef.h>
#include "i2cspm.h"
#include "gpiointerrupt.h"
#include "em_cmu.h"
#include "thunderboard/board.h"
#include "thunderboard/util.h"
#include "thunderboard/si7210.h"

Go to the source code of this file.

Functions

uint32_t SI7210_config (SI7210_Config config)
 Configures the Si7210 chip. More...
 
void SI7210_deInit (void)
 De-initializes the Si7210 chip. Disables the sensor power domain, this also disables other sensors. More...
 
uint32_t SI7210_init (void)
 Initializes the Si7210 chip. More...
 
uint32_t SI7210_measure (float *result)
 Performs a measurement. More...
 
uint32_t SI7210_regClearBits (uint8_t addr, uint8_t mask)
 Clears the given bit(s) in a register in the Si7021 device. More...
 
uint32_t SI7210_regRead (uint8_t addr, uint8_t *data)
 Reads register from the Si7021 device. More...
 
uint32_t SI7210_regSetBits (uint8_t addr, uint8_t mask)
 Sets the given bit(s) in a register in the Si7021 device. More...
 
uint32_t SI7210_regWrite (uint8_t addr, uint8_t data)
 Writes a register in the Si7021 device. More...
 
uint32_t SI7210_suspend (void)
 Puts the Si7210 chip in sleep mode. More...
 

Function Documentation

uint32_t SI7210_config ( SI7210_Config  config)

Configures the Si7210 chip.

Parameters
[in]configThe structure, which contains the configuration parameters
Returns
Returns zero on OK, non-zero otherwise

Definition at line 202 of file si7210.c.

References GPIO_IntConfig(), GPIOINT_CallbackRegister(), SI7210_regClearBits(), SI7210_regSetBits(), and SI7210_regWrite().

Referenced by SI7210_suspend().

void SI7210_deInit ( void  )

De-initializes the Si7210 chip. Disables the sensor power domain, this also disables other sensors.

Returns
None

Definition at line 150 of file si7210.c.

References BOARD_envSensEnable(), GPIO_IntConfig(), GPIO_PinModeSet(), GPIOINT_CallbackUnRegister(), and gpioModeDisabled.

uint32_t SI7210_init ( void  )

Initializes the Si7210 chip.

{DOXYGEN_INCLUDE_HALL_EFFECT_SENSOR} {DO_NOT_INCLUDE_WITH_DOXYGEN} DO_NOT_INCLUDE_WITH_DOXYGEN

Returns
Returns zero on OK, non-zero otherwise

Definition at line 102 of file si7210.c.

References BOARD_envSensEnable(), GPIO_PinModeSet(), GPIOINT_Init(), gpioModeInput, SI7210_regRead(), and UTIL_delay().

uint32_t SI7210_measure ( float *  result)

Performs a measurement.

Parameters
[out]resultThe measured field strength value in mT
Returns
Returns zero on OK, non-zero otherwise

Definition at line 374 of file si7210.c.

References SI7210_regRead().

uint32_t SI7210_regClearBits ( uint8_t  addr,
uint8_t  mask 
)

Clears the given bit(s) in a register in the Si7021 device.

Parameters
[in]addrThe address of the register
[in]maskThe mask specifies which bits should be clear. If a given bit of the mask is 1 that register bit will be cleared to 0. All the other register bits will be untouched.
Returns
None

Definition at line 531 of file si7210.c.

References SI7210_regRead(), and SI7210_regWrite().

Referenced by SI7210_config().

uint32_t SI7210_regRead ( uint8_t  addr,
uint8_t *  data 
)

Reads register from the Si7021 device.

Parameters
[in]addrThe register address to read from in the sensor
[out]dataThe data read from the device
Returns
Returns zero on OK, non-zero otherwise

Definition at line 423 of file si7210.c.

References I2C_TransferSeq_TypeDef::addr, I2C_TransferSeq_TypeDef::buf, I2C_TransferSeq_TypeDef::data, I2C_TransferSeq_TypeDef::flags, I2C_FLAG_WRITE_READ, I2CSPM_Transfer(), i2cTransferDone, and I2C_TransferSeq_TypeDef::len.

Referenced by SI7210_init(), SI7210_measure(), SI7210_regClearBits(), and SI7210_regSetBits().

uint32_t SI7210_regSetBits ( uint8_t  addr,
uint8_t  mask 
)

Sets the given bit(s) in a register in the Si7021 device.

Parameters
[in]addrThe address of the register
[in]maskThe mask specifies which bits should be set. If a given bit of the mask is 1 that register bit will be set to 1. All the other register bits will be untouched.
Returns
None

Definition at line 497 of file si7210.c.

References SI7210_regRead(), and SI7210_regWrite().

Referenced by SI7210_config(), and SI7210_suspend().

uint32_t SI7210_regWrite ( uint8_t  addr,
uint8_t  data 
)

Writes a register in the Si7021 device.

Parameters
[in]addrThe register address to write
[in]dataThe data to write to the register
Returns
Returns zero on OK, non-zero otherwise

Definition at line 459 of file si7210.c.

References I2C_TransferSeq_TypeDef::addr, I2C_TransferSeq_TypeDef::buf, I2C_TransferSeq_TypeDef::data, I2C_TransferSeq_TypeDef::flags, I2C_FLAG_WRITE_WRITE, I2CSPM_Transfer(), i2cTransferDone, and I2C_TransferSeq_TypeDef::len.

Referenced by SI7210_config(), SI7210_regClearBits(), and SI7210_regSetBits().

uint32_t SI7210_suspend ( void  )

Puts the Si7210 chip in sleep mode.

Returns
Returns zero on OK, non-zero otherwise

Definition at line 170 of file si7210.c.

References SI7210_config(), and SI7210_regSetBits().