Detailed Description

Timer/Counter (TIMER) Peripheral API.

The timer module consists of three main parts:

General timer config and enable control.
Compare/capture control.
Dead time insertion control (may not be available for all timers).

Data Structures
struct	TIMER_Init_TypeDef

struct	TIMER_InitCC_TypeDef

struct	TIMER_InitDTI_TypeDef

Macros
#define	TIMER_INIT_DEFAULT

#define	TIMER_INITCC_DEFAULT

#define	TIMER_INITDTI_DEFAULT

Enumerations
enum	TIMER_CCMode_TypeDef { timerCCModeOff = _TIMER_CC_CTRL_MODE_OFF, timerCCModeCapture = _TIMER_CC_CTRL_MODE_INPUTCAPTURE, timerCCModeCompare = _TIMER_CC_CTRL_MODE_OUTPUTCOMPARE, timerCCModePWM = _TIMER_CC_CTRL_MODE_PWM }

enum	TIMER_ClkSel_TypeDef { timerClkSelHFPerClk = _TIMER_CTRL_CLKSEL_PRESCHFPERCLK, timerClkSelCC1 = _TIMER_CTRL_CLKSEL_CC1, timerClkSelCascade = _TIMER_CTRL_CLKSEL_TIMEROUF }

enum	TIMER_DtiFaultAction_TypeDef { timerDtiFaultActionNone = _TIMER_DTFC_DTFA_NONE, timerDtiFaultActionInactive = _TIMER_DTFC_DTFA_INACTIVE, timerDtiFaultActionClear = _TIMER_DTFC_DTFA_CLEAR, timerDtiFaultActionTristate = _TIMER_DTFC_DTFA_TRISTATE }

enum	TIMER_Edge_TypeDef { timerEdgeRising = _TIMER_CC_CTRL_ICEDGE_RISING, timerEdgeFalling = _TIMER_CC_CTRL_ICEDGE_FALLING, timerEdgeBoth = _TIMER_CC_CTRL_ICEDGE_BOTH, timerEdgeNone = _TIMER_CC_CTRL_ICEDGE_NONE }

enum	TIMER_Event_TypeDef { timerEventEveryEdge = _TIMER_CC_CTRL_ICEVCTRL_EVERYEDGE, timerEventEvery2ndEdge = _TIMER_CC_CTRL_ICEVCTRL_EVERYSECONDEDGE, timerEventRising = _TIMER_CC_CTRL_ICEVCTRL_RISING, timerEventFalling = _TIMER_CC_CTRL_ICEVCTRL_FALLING }

enum	TIMER_InputAction_TypeDef { timerInputActionNone = _TIMER_CTRL_FALLA_NONE, timerInputActionStart = _TIMER_CTRL_FALLA_START, timerInputActionStop = _TIMER_CTRL_FALLA_STOP, timerInputActionReloadStart = _TIMER_CTRL_FALLA_RELOADSTART }

enum	TIMER_Mode_TypeDef { timerModeUp = _TIMER_CTRL_MODE_UP, timerModeDown = _TIMER_CTRL_MODE_DOWN, timerModeUpDown = _TIMER_CTRL_MODE_UPDOWN, timerModeQDec = _TIMER_CTRL_MODE_QDEC }

enum	TIMER_OutputAction_TypeDef { timerOutputActionNone = _TIMER_CC_CTRL_CUFOA_NONE, timerOutputActionToggle = _TIMER_CC_CTRL_CUFOA_TOGGLE, timerOutputActionClear = _TIMER_CC_CTRL_CUFOA_CLEAR, timerOutputActionSet = _TIMER_CC_CTRL_CUFOA_SET }

enum	TIMER_Prescale_TypeDef { timerPrescale1 = _TIMER_CTRL_PRESC_DIV1, timerPrescale2 = _TIMER_CTRL_PRESC_DIV2, timerPrescale4 = _TIMER_CTRL_PRESC_DIV4, timerPrescale8 = _TIMER_CTRL_PRESC_DIV8, timerPrescale16 = _TIMER_CTRL_PRESC_DIV16, timerPrescale32 = _TIMER_CTRL_PRESC_DIV32, timerPrescale64 = _TIMER_CTRL_PRESC_DIV64, timerPrescale128 = _TIMER_CTRL_PRESC_DIV128, timerPrescale256 = _TIMER_CTRL_PRESC_DIV256, timerPrescale512 = _TIMER_CTRL_PRESC_DIV512, timerPrescale1024 = _TIMER_CTRL_PRESC_DIV1024 }

enum	TIMER_PRSSEL_TypeDef { timerPRSSELCh0 = _TIMER_CC_CTRL_PRSSEL_PRSCH0, timerPRSSELCh1 = _TIMER_CC_CTRL_PRSSEL_PRSCH1, timerPRSSELCh2 = _TIMER_CC_CTRL_PRSSEL_PRSCH2, timerPRSSELCh3 = _TIMER_CC_CTRL_PRSSEL_PRSCH3, timerPRSSELCh4 = _TIMER_CC_CTRL_PRSSEL_PRSCH4, timerPRSSELCh5 = _TIMER_CC_CTRL_PRSSEL_PRSCH5, timerPRSSELCh6 = _TIMER_CC_CTRL_PRSSEL_PRSCH6, timerPRSSELCh7 = _TIMER_CC_CTRL_PRSSEL_PRSCH7, timerPRSSELCh8 = _TIMER_CC_CTRL_PRSSEL_PRSCH8, timerPRSSELCh9 = _TIMER_CC_CTRL_PRSSEL_PRSCH9, timerPRSSELCh10 = _TIMER_CC_CTRL_PRSSEL_PRSCH10, timerPRSSELCh11 = _TIMER_CC_CTRL_PRSSEL_PRSCH11 }

Functions
__STATIC_INLINE uint32_t	TIMER_CaptureGet (TIMER_TypeDef *timer, unsigned int ch)
	Get capture value for compare/capture channel when operating in capture mode. More...

__STATIC_INLINE void	TIMER_ClearDTIFault (TIMER_TypeDef *timer, uint32_t flags)
	Clear DTI fault source flags. More...

__STATIC_INLINE void	TIMER_CompareBufSet (TIMER_TypeDef *timer, unsigned int ch, uint32_t val)
	Set compare value buffer for compare/capture channel when operating in compare or PWM mode. More...

__STATIC_INLINE void	TIMER_CompareSet (TIMER_TypeDef *timer, unsigned int ch, uint32_t val)
	Set compare value for compare/capture channel when operating in compare or PWM mode. More...

__STATIC_INLINE uint32_t	TIMER_CounterGet (TIMER_TypeDef *timer)
	Get TIMER counter value. More...

__STATIC_INLINE void	TIMER_CounterSet (TIMER_TypeDef *timer, uint32_t val)
	Set TIMER counter value. More...

__STATIC_INLINE void	TIMER_Enable (TIMER_TypeDef *timer, bool enable)
	Start/stop TIMER. More...

__STATIC_INLINE void	TIMER_EnableDTI (TIMER_TypeDef *timer, bool enable)
	Enable or disable DTI unit. More...

__STATIC_INLINE uint32_t	TIMER_GetDTIFault (TIMER_TypeDef *timer)
	Get DTI fault source flags status. More...

void	TIMER_Init (TIMER_TypeDef timer, const TIMER_Init_TypeDef init)
	Initialize TIMER. More...

void	TIMER_InitCC (TIMER_TypeDef timer, unsigned int ch, const TIMER_InitCC_TypeDef init)
	Initialize TIMER compare/capture channel. More...

void	TIMER_InitDTI (TIMER_TypeDef timer, const TIMER_InitDTI_TypeDef init)
	Initialize the TIMER DTI unit. More...

__STATIC_INLINE void	TIMER_IntClear (TIMER_TypeDef *timer, uint32_t flags)
	Clear one or more pending TIMER interrupts. More...

__STATIC_INLINE void	TIMER_IntDisable (TIMER_TypeDef *timer, uint32_t flags)
	Disable one or more TIMER interrupts. More...

__STATIC_INLINE void	TIMER_IntEnable (TIMER_TypeDef *timer, uint32_t flags)
	Enable one or more TIMER interrupts. More...

__STATIC_INLINE uint32_t	TIMER_IntGet (TIMER_TypeDef *timer)
	Get pending TIMER interrupt flags. More...

__STATIC_INLINE uint32_t	TIMER_IntGetEnabled (TIMER_TypeDef *timer)
	Get enabled and pending TIMER interrupt flags. Useful for handling more interrupt sources in the same interrupt handler. More...

__STATIC_INLINE void	TIMER_IntSet (TIMER_TypeDef *timer, uint32_t flags)
	Set one or more pending TIMER interrupts from SW. More...

__STATIC_INLINE void	TIMER_Lock (TIMER_TypeDef *timer)
	Lock some of the TIMER registers in order to protect them from being modified. More...

__STATIC_INLINE uint32_t	TIMER_MaxCount (const TIMER_TypeDef *ref)
	Get the Max count of the timer. More...

void	TIMER_Reset (TIMER_TypeDef *timer)
	Reset TIMER to same state as after a HW reset. More...

__STATIC_INLINE void	TIMER_TopBufSet (TIMER_TypeDef *timer, uint32_t val)
	Set top value buffer for timer. More...

__STATIC_INLINE uint32_t	TIMER_TopGet (TIMER_TypeDef *timer)
	Get top value setting for timer. More...

__STATIC_INLINE void	TIMER_TopSet (TIMER_TypeDef *timer, uint32_t val)
	Set top value for timer. More...

__STATIC_INLINE void	TIMER_Unlock (TIMER_TypeDef *timer)
	Unlock the TIMER so that writing to locked registers again is possible. More...

__STATIC_INLINE bool	TIMER_Valid (const TIMER_TypeDef *ref)
	Validate the TIMER register block pointer. More...

Macro Definition Documentation

#define TIMER_INIT_DEFAULT

Value:

{                                                                                     \
  true,                   /* Enable timer when init complete. */                      \
  false,                  /* Stop counter during debug halt. */                       \
  timerPrescale1,         /* No prescaling. */                                        \
  timerClkSelHFPerClk,    /* Select HFPER clock. */                                   \
  false,                  /* Not 2x count mode. */                                    \
  false,                  /* No ATI. */                                               \
  timerInputActionNone,   /* No action on falling input edge. */                      \
  timerInputActionNone,   /* No action on rising input edge. */                       \
  timerModeUp,            /* Up-counting. */                                          \
  false,                  /* Do not clear DMA requests when DMA channel is active. */ \
  false,                  /* Select X2 quadrature decode mode (if used). */           \
  false,                  /* Disable one shot. */                                     \
  false                   /* Not started/stopped/reloaded by other timers. */         \
}

Default config for TIMER init structure.

Definition at line 301 of file em_timer.h.

Referenced by BOARD_init(), and USTIMER_Init().

#define TIMER_INITCC_DEFAULT

Value:

{                                                                            \
  timerEventEveryEdge,      /* Event on every capture. */                    \
  timerEdgeRising,          /* Input capture edge on rising edge. */         \
  timerPRSSELCh0,           /* Not used by default, select PRS channel 0. */ \
  timerOutputActionNone,    /* No action on underflow. */                    \
  timerOutputActionNone,    /* No action on overflow. */                     \
  timerOutputActionNone,    /* No action on match. */                        \
  timerCCModeOff,           /* Disable compare/capture channel. */           \
  false,                    /* Disable filter. */                            \
  false,                    /* Select TIMERnCCx input. */                    \
  false,                    /* Clear output when counter disabled. */        \
  false                     /* Do not invert output. */                      \
}

Default config for TIMER compare/capture init structure.

Definition at line 381 of file em_timer.h.

Referenced by BOARD_init(), and USTIMER_Init().

#define TIMER_INITDTI_DEFAULT

Value:

{                                                                            \
  true,                     /* Enable the DTI. */                            \
  false,                    /* CC[0|1|2] outputs are active high. */         \
  false,                    /* CDTI[0|1|2] outputs are not inverted. */      \
  false,                    /* No auto restart when debugger exits. */       \
  false,                    /* No PRS source selected. */                    \
  timerPRSSELCh0,           /* Not used by default, select PRS channel 0. */ \
  timerPrescale1,           /* No prescaling.  */                            \
  0,                        /* No rise time. */                              \
  0,                        /* No fall time. */                              \
  TIMER_DTOGEN_DTOGCC0EN|TIMER_DTOGEN_DTOGCDTI0EN, /* Enable CC0 and CDTI0 */\
  true,                     /* Enable core lockup as fault source */         \
  true,                     /* Enable debugger as fault source */            \
  false,                    /* Disable PRS fault source 0 */                 \
  timerPRSSELCh0,           /* Not used by default, select PRS channel 0. */ \
  false,                    /* Disable PRS fault source 1 */                 \
  timerPRSSELCh0,           /* Not used by default, select PRS channel 0. */ \
  timerDtiFaultActionInactive, /* No fault action. */                        \
}

Default config for TIMER DTI init structure.

Definition at line 459 of file em_timer.h.

Enumeration Type Documentation

enum TIMER_CCMode_TypeDef

Timer compare/capture mode.

Enumerator
timerCCModeOff	Channel turned off.
timerCCModeCapture	Input capture.
timerCCModeCompare	Output compare.
timerCCModePWM	Pulse-Width modulation.

Definition at line 81 of file em_timer.h.

enum TIMER_ClkSel_TypeDef

Clock select.

Enumerator
timerClkSelHFPerClk	Prescaled HFPER clock.
timerClkSelCC1	Compare/Capture Channel 1 Input.
timerClkSelCascade	Cascaded, clocked by underflow (down-counting) or overflow (up-counting) by lower numbered timer.

Definition at line 91 of file em_timer.h.

enum TIMER_DtiFaultAction_TypeDef

DT (Dead Time) Fault Actions.

Enumerator
timerDtiFaultActionNone	No action on fault.
timerDtiFaultActionInactive	Set outputs inactive.
timerDtiFaultActionClear	Clear outputs.
timerDtiFaultActionTristate	Tristate outputs.

Definition at line 240 of file em_timer.h.

enum TIMER_Edge_TypeDef

Input capture edge select.

Enumerator
timerEdgeRising	Rising edges detected.
timerEdgeFalling	Falling edges detected.
timerEdgeBoth	Both edges detected.
timerEdgeNone	No edge detection, leave signal as is.

Definition at line 108 of file em_timer.h.

enum TIMER_Event_TypeDef

Input capture event control.

Enumerator
timerEventEveryEdge	PRS output pulse, interrupt flag and DMA request set on every capture.
timerEventEvery2ndEdge	PRS output pulse, interrupt flag and DMA request set on every second capture.
timerEventRising	PRS output pulse, interrupt flag and DMA request set on rising edge (if input capture edge = BOTH).
timerEventFalling	PRS output pulse, interrupt flag and DMA request set on falling edge (if input capture edge = BOTH).

Definition at line 125 of file em_timer.h.

enum TIMER_InputAction_TypeDef

Input edge action.

Enumerator
timerInputActionNone	No action taken.
timerInputActionStart	Start counter without reload.
timerInputActionStop	Stop counter without reload.
timerInputActionReloadStart	Reload and start counter.

Definition at line 145 of file em_timer.h.

enum TIMER_Mode_TypeDef

Timer mode.

Enumerator
timerModeUp	Up-counting.
timerModeDown	Down-counting.
timerModeUpDown	Up/down-counting.
timerModeQDec	Quadrature decoder.

Definition at line 162 of file em_timer.h.

enum TIMER_OutputAction_TypeDef

Compare/capture output action.

Enumerator
timerOutputActionNone	No action.
timerOutputActionToggle	Toggle on event.
timerOutputActionClear	Clear on event.
timerOutputActionSet	Set on event.

Definition at line 172 of file em_timer.h.

enum TIMER_Prescale_TypeDef

Prescaler.

Enumerator
timerPrescale1	Divide by 1.
timerPrescale2	Divide by 2.
timerPrescale4	Divide by 4.
timerPrescale8	Divide by 8.
timerPrescale16	Divide by 16.
timerPrescale32	Divide by 32.
timerPrescale64	Divide by 64.
timerPrescale128	Divide by 128.
timerPrescale256	Divide by 256.
timerPrescale512	Divide by 512.
timerPrescale1024	Divide by 1024.

Definition at line 189 of file em_timer.h.

enum TIMER_PRSSEL_TypeDef

Peripheral Reflex System signal.

Enumerator
timerPRSSELCh0	PRS channel 0.
timerPRSSELCh1	PRS channel 1.
timerPRSSELCh2	PRS channel 2.
timerPRSSELCh3	PRS channel 3.
timerPRSSELCh4	PRS channel 4.
timerPRSSELCh5	PRS channel 5.
timerPRSSELCh6	PRS channel 6.
timerPRSSELCh7	PRS channel 7.
timerPRSSELCh8	PRS channel 8.
timerPRSSELCh9	PRS channel 9.
timerPRSSELCh10	PRS channel 10.
timerPRSSELCh11	PRS channel 11.

Definition at line 206 of file em_timer.h.

Function Documentation

__STATIC_INLINE uint32_t TIMER_CaptureGet	(	TIMER_TypeDef *	timer,
		unsigned int	ch
	)

Get capture value for compare/capture channel when operating in capture mode.

Parameters

[in]	timer	Pointer to TIMER peripheral register block.
[in]	ch	Compare/capture channel to access.

Returns: Current capture value.

Definition at line 560 of file em_timer.h.

References TIMER_TypeDef::CC, and TIMER_CC_TypeDef::CCV.

__STATIC_INLINE void TIMER_ClearDTIFault	(	TIMER_TypeDef *	timer,
		uint32_t	flags
	)

Clear DTI fault source flags.

Parameters

[in]	timer	Pointer to TIMER peripheral register block.
[in]	flags	DTI fault source(s) to clear. Use one or more valid DTI fault source flags (TIMER_DTFAULT_nnn) OR'ed together.

Definition at line 740 of file em_timer.h.

References TIMER_TypeDef::DTFAULTC, and TIMER0.

Referenced by TIMER_InitDTI().

__STATIC_INLINE void TIMER_CompareBufSet	(	TIMER_TypeDef *	timer,
		unsigned int	ch,
		uint32_t	val
	)

Set compare value buffer for compare/capture channel when operating in compare or PWM mode.

The compare value buffer holds the value which will be written to TIMERn_CCx_CCV on an update event if the buffer has been updated since the last event.

Parameters

[in]	timer	Pointer to TIMER peripheral register block.
[in]	ch	Compare/capture channel to access.
[in]	val	Value to set in compare value buffer register.

Definition at line 585 of file em_timer.h.

References TIMER_TypeDef::CC, TIMER_CC_TypeDef::CCVB, and TIMER_MaxCount().

Referenced by BOARD_rgbledSetRawColor().

__STATIC_INLINE void TIMER_CompareSet	(	TIMER_TypeDef *	timer,
		unsigned int	ch,
		uint32_t	val
	)

Set compare value for compare/capture channel when operating in compare or PWM mode.

Parameters

[in]	timer	Pointer to TIMER peripheral register block.
[in]	ch	Compare/capture channel to access.
[in]	val	Value to set in compare value register.

Definition at line 608 of file em_timer.h.

References TIMER_TypeDef::CC, TIMER_CC_TypeDef::CCV, and TIMER_MaxCount().

__STATIC_INLINE uint32_t TIMER_CounterGet ( TIMER_TypeDef * timer )

Get TIMER counter value.

Parameters

[in] timer Pointer to TIMER peripheral register block.

Returns: Current TIMER counter value.

Definition at line 627 of file em_timer.h.

References TIMER_TypeDef::CNT.

__STATIC_INLINE void TIMER_CounterSet	(	TIMER_TypeDef *	timer,
		uint32_t	val
	)

Set TIMER counter value.

Parameters

[in]	timer	Pointer to TIMER peripheral register block.
[in]	val	Value to set counter to.

Definition at line 643 of file em_timer.h.

References TIMER_TypeDef::CNT, and TIMER_MaxCount().

__STATIC_INLINE void TIMER_Enable	(	TIMER_TypeDef *	timer,
		bool	enable
	)

Start/stop TIMER.

Parameters

[in]	timer	Pointer to TIMER peripheral register block.
[in]	enable	true to enable counting, false to disable.

Definition at line 660 of file em_timer.h.

References TIMER_TypeDef::CMD, TIMER_CMD_START, and TIMER_CMD_STOP.

Referenced by BOARD_rgbledSetRawColor(), and USTIMER_DeInit().

__STATIC_INLINE void TIMER_EnableDTI	(	TIMER_TypeDef *	timer,
		bool	enable
	)

Enable or disable DTI unit.

Parameters

[in]	timer	Pointer to TIMER peripheral register block.
[in]	enable	true to enable DTI unit, false to disable.

Definition at line 693 of file em_timer.h.

References TIMER_TypeDef::DTCTRL, TIMER0, and TIMER_DTCTRL_DTEN.

Referenced by TIMER_InitDTI().

__STATIC_INLINE uint32_t TIMER_GetDTIFault ( TIMER_TypeDef * timer )

Get DTI fault source flags status.

Note: The event bits are not cleared by the use of this function.

Parameters

[in] timer Pointer to TIMER peripheral register block.

Returns: Status of the DTI fault source flags. Returns one or more valid DTI fault source flags (TIMER_DTFAULT_nnn) OR'ed together.

Definition at line 722 of file em_timer.h.

References TIMER_TypeDef::DTFAULT, and TIMER0.

Referenced by TIMER_InitDTI().

void TIMER_Init	(	TIMER_TypeDef *	timer,
		const TIMER_Init_TypeDef *	init
	)

Initialize TIMER.

Notice that counter top must be configured separately with for instance TIMER_TopSet(). In addition, compare/capture and dead-time insertion init must be initialized separately if used. That should probably be done prior to the use of this function if configuring the TIMER to start when initialization is completed.

Parameters

[in]	timer	Pointer to TIMER peripheral register block.
[in]	init	Pointer to TIMER initialization structure.

Definition at line 76 of file em_timer.c.

Referenced by BOARD_init(), and USTIMER_Init().

void TIMER_InitCC	(	TIMER_TypeDef *	timer,
		unsigned int	ch,
		const TIMER_InitCC_TypeDef *	init
	)

Initialize TIMER compare/capture channel.

Notice that if operating channel in compare mode, the CCV and CCVB register must be set separately as required.

Parameters

[in]	timer	Pointer to TIMER peripheral register block.
[in]	ch	Compare/capture channel to init for.
[in]	init	Pointer to TIMER initialization structure.

Definition at line 130 of file em_timer.c.

Referenced by BOARD_init(), and USTIMER_Init().

void TIMER_InitDTI	(	TIMER_TypeDef *	timer,
		const TIMER_InitDTI_TypeDef *	init
	)

Initialize the TIMER DTI unit.

Parameters

[in]	timer	Pointer to TIMER peripheral register block.
[in]	init	Pointer to TIMER DTI initialization structure.

Definition at line 163 of file em_timer.c.

__STATIC_INLINE void TIMER_IntClear	(	TIMER_TypeDef *	timer,
		uint32_t	flags
	)

Clear one or more pending TIMER interrupts.

Parameters

[in]	timer	Pointer to TIMER peripheral register block.
[in]	flags	Pending TIMER interrupt source(s) to clear. Use one or more valid interrupt flags for the TIMER module (TIMER_IF_nnn) OR'ed together.

Definition at line 760 of file em_timer.h.

References TIMER_TypeDef::IFC.

Referenced by USTIMER_DeInit().

__STATIC_INLINE void TIMER_IntDisable	(	TIMER_TypeDef *	timer,
		uint32_t	flags
	)

Disable one or more TIMER interrupts.

Parameters

[in]	timer	Pointer to TIMER peripheral register block.
[in]	flags	TIMER interrupt source(s) to disable. Use one or more valid interrupt flags for the TIMER module (TIMER_IF_nnn) OR'ed together.

Definition at line 777 of file em_timer.h.

References TIMER_TypeDef::IEN.

Referenced by USTIMER_DeInit(), and USTIMER_Init().

__STATIC_INLINE void TIMER_IntEnable	(	TIMER_TypeDef *	timer,
		uint32_t	flags
	)

Enable one or more TIMER interrupts.

Note: Depending on the use, a pending interrupt may already be set prior to enabling the interrupt. Consider using TIMER_IntClear() prior to enabling if such a pending interrupt should be ignored.

Parameters

[in]	timer	Pointer to TIMER peripheral register block.
[in]	flags	TIMER interrupt source(s) to enable. Use one or more valid interrupt flags for the TIMER module (TIMER_IF_nnn) OR'ed together.

Definition at line 799 of file em_timer.h.

References TIMER_TypeDef::IEN.

__STATIC_INLINE uint32_t TIMER_IntGet ( TIMER_TypeDef * timer )

Get pending TIMER interrupt flags.

Note: The event bits are not cleared by the use of this function.

Parameters

[in] timer Pointer to TIMER peripheral register block.

Returns: TIMER interrupt source(s) pending. Returns one or more valid interrupt flags for the TIMER module (TIMER_IF_nnn) OR'ed together.

Definition at line 819 of file em_timer.h.

References TIMER_TypeDef::IF.

__STATIC_INLINE uint32_t TIMER_IntGetEnabled ( TIMER_TypeDef * timer )

Get enabled and pending TIMER interrupt flags. Useful for handling more interrupt sources in the same interrupt handler.

Parameters

[in] timer Pointer to TIMER peripheral register block.

Note: Interrupt flags are not cleared by the use of this function.

Returns

Pending and enabled TIMER interrupt sources. The return value is the bitwise AND combination of

the OR combination of enabled interrupt sources in TIMERx_IEN_nnn register (TIMERx_IEN_nnn) and
the OR combination of valid interrupt flags of the TIMER module (TIMERx_IF_nnn).

Definition at line 844 of file em_timer.h.

References TIMER_TypeDef::IEN, and TIMER_TypeDef::IF.

__STATIC_INLINE void TIMER_IntSet	(	TIMER_TypeDef *	timer,
		uint32_t	flags
	)

Set one or more pending TIMER interrupts from SW.

Parameters

[in]	timer	Pointer to TIMER peripheral register block.
[in]	flags	TIMER interrupt source(s) to set to pending. Use one or more valid interrupt flags for the TIMER module (TIMER_IF_nnn) OR'ed together.

Definition at line 868 of file em_timer.h.

References TIMER_TypeDef::IFS.

__STATIC_INLINE void TIMER_Lock ( TIMER_TypeDef * timer )

Lock some of the TIMER registers in order to protect them from being modified.

Please refer to the reference manual for TIMER registers that will be locked.

Note: If locking the TIMER registers, they must be unlocked prior to using any TIMER API functions modifying TIMER registers protected by the lock.

Parameters

[in] timer Pointer to TIMER peripheral register block.

Definition at line 890 of file em_timer.h.

References TIMER_TypeDef::DTLOCK, TIMER0, and TIMER_DTLOCK_LOCKKEY_LOCK.

__STATIC_INLINE uint32_t TIMER_MaxCount ( const TIMER_TypeDef * ref )

Get the Max count of the timer.

Parameters

[in] timer Pointer to TIMER peripheral register block.

Returns: The max count value of the timer. This is 0xFFFF for 16 bit timers and 0xFFFFFFFF for 32 bit timers.

Definition at line 529 of file em_timer.h.

References WTIMER0, and WTIMER1.

Referenced by TIMER_CompareBufSet(), TIMER_CompareSet(), TIMER_CounterSet(), TIMER_TopBufSet(), and TIMER_TopSet().

void TIMER_Reset ( TIMER_TypeDef * timer )

Reset TIMER to same state as after a HW reset.

Note: The ROUTE register is NOT reset by this function, in order to allow for centralized setup of this feature.

Parameters

[in] timer Pointer to TIMER peripheral register block.

Definition at line 218 of file em_timer.c.

References _TIMER_CC_CCV_RESETVALUE, _TIMER_CC_CCVB_RESETVALUE, _TIMER_CC_CTRL_RESETVALUE, _TIMER_CNT_RESETVALUE, _TIMER_CTRL_RESETVALUE, _TIMER_DTCTRL_RESETVALUE, _TIMER_DTFAULTC_MASK, _TIMER_DTFC_RESETVALUE, _TIMER_DTOGEN_RESETVALUE, _TIMER_DTTIME_RESETVALUE, _TIMER_IEN_RESETVALUE, _TIMER_IFC_MASK, _TIMER_TOP_RESETVALUE, _TIMER_TOPB_RESETVALUE, TIMER_TypeDef::CC, TIMER_CC_TypeDef::CCV, TIMER_CC_TypeDef::CCVB, TIMER_TypeDef::CMD, TIMER_TypeDef::CNT, TIMER_CC_TypeDef::CTRL, TIMER_TypeDef::CTRL, TIMER_TypeDef::DTCTRL, TIMER_TypeDef::DTFAULTC, TIMER_TypeDef::DTFC, TIMER_TypeDef::DTLOCK, TIMER_TypeDef::DTOGEN, TIMER_TypeDef::DTTIME, TIMER_TypeDef::IEN, TIMER_TypeDef::IFC, TIMER_CMD_STOP, TIMER_DTLOCK_LOCKKEY_UNLOCK, TIMER_TypeDef::TOP, and TIMER_TypeDef::TOPB.

__STATIC_INLINE void TIMER_TopBufSet	(	TIMER_TypeDef *	timer,
		uint32_t	val
	)

Set top value buffer for timer.

When the top value buffer register is updated, the value is loaded into the top value register at the next wrap around. This feature is useful in order to update the top value safely when the timer is running.

Parameters