API_Layer

Detailed Description

EzRadio API Layer

.

Enumerations
enum	EZRADIO_ConfigRet_t {   EZRADIO_CONFIG_SUCCESS,   EZRADIO_CONFIG_NO_PATCH,   EZRADIO_CONFIG_CTS_TIMEOUT,   EZRADIO_CONFIG_PATCH_FAIL,   EZRADIO_CONFIG_COMMAND_ERROR }

Functions
void	ezradio_change_state (uint8_t next_state1)
EZRADIO_ConfigRet_t	ezradio_configuration_init (const uint8_t *pSetPropCmd)
void	ezradio_ezconfig_check (uint16_t checksum, ezradio_cmd_reply_t *ezradioReply)
void	ezradio_fifo_info (uint8_t fifo, ezradio_cmd_reply_t *ezradioReply)
void	ezradio_fifo_info_fast_read (ezradio_cmd_reply_t *ezradioReply)
void	ezradio_fifo_info_fast_reset (uint8_t fifo)
void	ezradio_frr_a_read (uint8_t respByteCount, ezradio_cmd_reply_t *ezradioReply)
void	ezradio_frr_b_read (uint8_t respByteCount, ezradio_cmd_reply_t *ezradioReply)
void	ezradio_frr_c_read (uint8_t respByteCount, ezradio_cmd_reply_t *ezradioReply)
void	ezradio_frr_d_read (uint8_t respByteCount, ezradio_cmd_reply_t *ezradioReply)
void	ezradio_func_info (ezradio_cmd_reply_t *ezradioReply)
void	ezradio_get_adc_reading (uint8_t adc_en, uint8_t adc_cfg, ezradio_cmd_reply_t *ezradioReply)
void	ezradio_get_chip_status (uint8_t chip_clr_pend, ezradio_cmd_reply_t *ezradioReply)
void	ezradio_get_chip_status_fast_clear (void)
void	ezradio_get_chip_status_fast_clear_read (ezradio_cmd_reply_t *ezradioReply)
void	ezradio_get_int_status (uint8_t ph_clr_pend, uint8_t modem_clr_pend, uint8_t chip_clr_pend, ezradio_cmd_reply_t *ezradioReply)
void	ezradio_get_int_status_fast_clear (void)
void	ezradio_get_int_status_fast_clear_read (ezradio_cmd_reply_t *ezradioReply)
void	ezradio_get_modem_status (uint8_t modem_clr_pend, ezradio_cmd_reply_t *ezradioReply)
void	ezradio_get_modem_status_fast_clear (void)
void	ezradio_get_modem_status_fast_clear_read (ezradio_cmd_reply_t *ezradioReply)
void	ezradio_get_packet_info (uint8_t field_number_mask, uint16_t len, int16_t diff_len, ezradio_cmd_reply_t *ezradioReply)
void	ezradio_get_ph_status (uint8_t ph_clr_pend, ezradio_cmd_reply_t *ezradioReply)
void	ezradio_get_ph_status_fast_clear (void)
void	ezradio_get_ph_status_fast_clear_read (ezradio_cmd_reply_t *ezradioReply)
void	ezradio_get_property (uint8_t group, uint8_t num_props, uint8_t start_prop, ezradio_cmd_reply_t *ezradioReply)
void	ezradio_gpio_pin_cfg (uint8_t gpio0, uint8_t gpio1, uint8_t gpio2, uint8_t gpio3, uint8_t nirq, uint8_t sdo, uint8_t gen_config, ezradio_cmd_reply_t *ezradioReply)
void	ezradio_gpio_pin_cfg_fast (ezradio_cmd_reply_t *ezradioReply)
void	ezradio_ircal (uint8_t searching_step_size, uint8_t searching_rssi_avg, uint8_t rx_chain_setting1, uint8_t rx_chain_setting2)
void	ezradio_ircal_manual (uint8_t ircal_amp, uint8_t ircal_ph, ezradio_cmd_reply_t *ezradioReply)
void	ezradio_nop (void)
void	ezradio_part_info (ezradio_cmd_reply_t *ezradioReply)
void	ezradio_power_up (uint8_t boot_options, uint8_t xtal_options, uint32_t xo_freq)
void	ezradio_read_cmd_buff (ezradio_cmd_reply_t *ezradioReply)
void	ezradio_read_rx_fifo (uint8_t numbytes, uint8_t *prxdata)
void	ezradio_request_device_state (ezradio_cmd_reply_t *ezradioReply)
void	ezradio_reset (void)
void	ezradio_rx_hop (uint8_t inte, uint8_t frac2, uint8_t frac1, uint8_t frac0, uint8_t vco_cnt1, uint8_t vco_cnt0)
void	ezradio_set_property (uint8_t group, uint8_t num_props, uint8_t start_prop,...)
void	ezradio_start_rx (uint8_t channel, uint8_t condition, uint16_t rx_len, uint8_t next_state1, uint8_t next_state2, uint8_t next_state3)
void	ezradio_start_rx_fast (void)
void	ezradio_start_tx (uint8_t channel, uint8_t condition, uint16_t tx_len)
void	ezradio_start_tx_fast (void)
void	ezradio_tx_hop (uint8_t inte, uint8_t frac2, uint8_t frac1, uint8_t frac0, uint8_t vco_cnt1, uint8_t vco_cnt0, uint8_t pll_settle_time1, uint8_t pll_settle_time0)
void	ezradio_write_ezconfig_array (uint8_t numBytes, uint8_t *pEzConfigArray)
void	ezradio_write_tx_fifo (uint8_t numbytes, uint8_t *pdata)

Enumeration Type Documentation

enum EZRADIO_ConfigRet_t

EZRadio device configuration return values

Enumerator
EZRADIO_CONFIG_SUCCESS	Configuration succeded.
EZRADIO_CONFIG_NO_PATCH	No patch is given.
EZRADIO_CONFIG_CTS_TIMEOUT	CTS timeout error during configuration.
EZRADIO_CONFIG_PATCH_FAIL	Patching is failed.
EZRADIO_CONFIG_COMMAND_ERROR	Command error during configuration.

Definition at line 66 of file ezradio_api_lib.h.

Function Documentation

void ezradio_change_state

(

uint8_t

next_state1

)

Issue a change state command to the radio.

Parameters

[in]

next_state1

Next state.

Definition at line 302 of file ezradio_api_lib.c.

References ezradio_comm_SendCmd().

Referenced by ezradioStopDirectReceive(), ezradioStopDirectTransmit(), ezradioStopPn9(), and ezradioStopUnmodulatedCarrier().

EZRADIO_ConfigRet_t ezradio_configuration_init

(

const uint8_t *

pSetPropCmd

)

This function is used to load all properties and commands with a list of NULL terminated commands. Before this function ezradio_reset should be called.

Parameters

[in]

pSetPropCmd

Pointer to the configuration array.

Definition at line 53 of file ezradio_api_lib_add.c.

References ezradio_comm_SendCmdGetResp(), EZRADIO_CONFIG_COMMAND_ERROR, EZRADIO_CONFIG_CTS_TIMEOUT, EZRADIO_CONFIG_SUCCESS, ezradio_get_int_status(), ezradio_hal_NirqLevel(), and ezradio_write_ezconfig_array().

Referenced by ezradioInit().

void ezradio_ezconfig_check	(	uint16_t	checksum,
		ezradio_cmd_reply_t *	ezradioReply
	)

Validates the EZConfig array was written correctly.

Parameters

[in]	checksum	Checksum value
[out]	ezradioReply	Reply structure of the command.

Definition at line 159 of file ezradio_api_lib_add.c.

References ezradio_comm_CtsWentHigh, and ezradio_comm_SendCmdGetResp().

void ezradio_fifo_info	(	uint8_t	fifo,
		ezradio_cmd_reply_t *	ezradioReply
	)

Send the FIFO_INFO command to the radio. Optionally resets the TX/RX FIFO. Reads the radio response back into ezradioReply.

Parameters

[in]	fifo	RX/TX FIFO reset flags.
[out]	ezradioReply	Reply structure of the command.

Definition at line 336 of file ezradio_api_lib.c.

References ezradio_comm_SendCmdGetResp().

Referenced by ezradioResetTRxFifo().

void ezradio_fifo_info_fast_read

(

ezradio_cmd_reply_t *

ezradioReply

)

Reads RX/TX FIFO count space. Does NOT reset RX/TX FIFO

Parameters

[out]

ezradioReply

Reply structure of the command.

Definition at line 987 of file ezradio_api_lib.c.

References ezradio_comm_SendCmdGetResp().

void ezradio_fifo_info_fast_reset

(

uint8_t

fifo

)

Resets the RX/TX FIFO. Does not read back anything from TX/RX FIFO

Parameters

[in]

fifo

FIFO to be reset.

Definition at line 971 of file ezradio_api_lib.c.

References ezradio_comm_SendCmd().

void ezradio_frr_a_read	(	uint8_t	respByteCount,
		ezradio_cmd_reply_t *	ezradioReply
	)

Reads the Fast Response Registers starting with A register into ezradioReply union.

Parameters

[in]	respByteCount	Number of Fast Response Registers to be read.
[out]	ezradioReply	Reply structure of the command.

Definition at line 459 of file ezradio_api_lib.c.

References ezradio_comm_ReadData().

void ezradio_frr_b_read	(	uint8_t	respByteCount,
		ezradio_cmd_reply_t *	ezradioReply
	)

Reads the Fast Response Registers starting with B register into ezradioReply union.

Parameters

[in]	respByteCount	Number of Fast Response Registers to be read.
[out]	ezradioReply	Reply structure of the command.

Definition at line 484 of file ezradio_api_lib.c.

References ezradio_comm_ReadData().

void ezradio_frr_c_read	(	uint8_t	respByteCount,
		ezradio_cmd_reply_t *	ezradioReply
	)

Reads the Fast Response Registers starting with C register into ezradioReply union.

Parameters

[in]	respByteCount	Number of Fast Response Registers to be read.
[out]	ezradioReply	Reply structure of the command.

Definition at line 509 of file ezradio_api_lib.c.

References ezradio_comm_ReadData().

void ezradio_frr_d_read	(	uint8_t	respByteCount,
		ezradio_cmd_reply_t *	ezradioReply
	)

Reads the Fast Response Registers starting with D register into ezradioReply union.

Parameters

[in]	respByteCount	Number of Fast Response Registers to be read.
[out]	ezradioReply	Reply structure of the command.

Definition at line 534 of file ezradio_api_lib.c.

References ezradio_comm_ReadData().

void ezradio_func_info

(

ezradio_cmd_reply_t *

ezradioReply

)

Sends the FUNC_INFO command to the radio, then reads the resonse into ezradioReply union.

Parameters

[out]

ezradioReply

Reply structure of the command.

Definition at line 432 of file ezradio_api_lib.c.

References ezradio_comm_SendCmdGetResp().

void ezradio_get_adc_reading	(	uint8_t	adc_en,
		uint8_t	adc_cfg,
		ezradio_cmd_reply_t *	ezradioReply
	)

Reads the ADC values from the radio into ezradioReply union.

Parameters

[in]	adc_en	ADC enable parameter.
[in]	adc_cfg	ADC configuration parameter.
[out]	ezradioReply	Reply structure of the command.

Definition at line 195 of file ezradio_api_lib_add.c.

References ezradio_comm_SendCmdGetResp().

void ezradio_get_chip_status	(	uint8_t	chip_clr_pend,
		ezradio_cmd_reply_t *	ezradioReply
	)

Gets the Chip status flags. Optionally clears them.

Parameters

[in]	chip_clr_pend	Flags to clear.
[out]	ezradioReply	Reply structure of the command.

Definition at line 679 of file ezradio_api_lib.c.

References ezradio_comm_SendCmdGetResp().

void ezradio_get_chip_status_fast_clear

(

void

)

Clear all Chip status flags. Does NOT read back interrupt flags

Definition at line 930 of file ezradio_api_lib.c.

References ezradio_comm_SendCmd().

void ezradio_get_chip_status_fast_clear_read

(

ezradio_cmd_reply_t *

ezradioReply

)

Clear and read all Chip status flags.

Parameters

[out]

ezradioReply

Reply structure of the command.

Definition at line 946 of file ezradio_api_lib.c.

References ezradio_comm_SendCmdGetResp().

void ezradio_get_int_status	(	uint8_t	ph_clr_pend,
		uint8_t	modem_clr_pend,
		uint8_t	chip_clr_pend,
		ezradio_cmd_reply_t *	ezradioReply
	)

Get the Interrupt status/pending flags form the radio and clear flags if requested.

Parameters

[in]	ph_clr_pend	Packet Handler pending flags clear.
[in]	modem_clr_pend	Modem Status pending flags clear.
[in]	chip_clr_pend	Chip State pending flags clear.
[out]	ezradioReply	Reply structure of the command.

Definition at line 186 of file ezradio_api_lib.c.

References ezradio_comm_SendCmdGetResp().

Referenced by ezradio_configuration_init(), ezradioInit(), ezradioPluginManager(), ezradioStartDirectReceive(), ezradioStartDirectTransmit(), ezradioStartPn9(), and ezradioStartUnmodulatedCarrier().

void ezradio_get_int_status_fast_clear

(

void

)

Clear all Interrupt status/pending flags. Does NOT read back interrupt flags

Definition at line 772 of file ezradio_api_lib.c.

References ezradio_comm_SendCmd().

void ezradio_get_int_status_fast_clear_read

(

ezradio_cmd_reply_t *

ezradioReply

)

Clear and read all Interrupt status/pending flags

Parameters

[out]

ezradioReply

Reply structure of the command.

Definition at line 787 of file ezradio_api_lib.c.

References ezradio_comm_SendCmdGetResp().

void ezradio_get_modem_status	(	uint8_t	modem_clr_pend,
		ezradio_cmd_reply_t *	ezradioReply
	)

Gets the Modem status flags. Optionally clears them.

Parameters

[in]	modem_clr_pend	Flags to clear.
[out]	ezradioReply	Reply structure of the command.

Definition at line 647 of file ezradio_api_lib.c.

References ezradio_comm_SendCmdGetResp().

void ezradio_get_modem_status_fast_clear

(

void

)

Clear all Modem status flags. Does NOT read back interrupt flags

Definition at line 885 of file ezradio_api_lib.c.

References ezradio_comm_SendCmd().

void ezradio_get_modem_status_fast_clear_read

(

ezradio_cmd_reply_t *

ezradioReply

)

Clear and read all Modem status flags.

Parameters

[out]

ezradioReply

Reply structure of the command.

Definition at line 901 of file ezradio_api_lib.c.

References ezradio_comm_SendCmdGetResp().

void ezradio_get_packet_info	(	uint8_t	field_number_mask,
		uint16_t	len,
		int16_t	diff_len,
		ezradio_cmd_reply_t *	ezradioReply
	)

Receives information from the radio of the current packet. Optionally can be used to modify the Packet Handler properties during packet reception.

Parameters

[in]	field_number_mask	Packet Field number mask value.
[in]	len	Length value.
[in]	diff_len	Difference length.
[out]	ezradioReply	Reply structure of the command.

Definition at line 710 of file ezradio_api_lib.c.

References ezradio_comm_SendCmdGetResp().

void ezradio_get_ph_status	(	uint8_t	ph_clr_pend,
		ezradio_cmd_reply_t *	ezradioReply
	)

Gets the Packet Handler status flags. Optionally clears them.

Parameters

[in]	ph_clr_pend	Flags to clear.
[out]	ezradioReply	Reply structure of the command.

Definition at line 621 of file ezradio_api_lib.c.

References ezradio_comm_SendCmdGetResp().

void ezradio_get_ph_status_fast_clear

(

void

)

Clear all Packet Handler status flags. Does NOT read back interrupt flags

Definition at line 846 of file ezradio_api_lib.c.

References ezradio_comm_SendCmd().

void ezradio_get_ph_status_fast_clear_read

(

ezradio_cmd_reply_t *

ezradioReply

)

Clear and read all Packet Handler status flags.

Parameters

[out]

ezradioReply

Reply structure of the command.

Definition at line 862 of file ezradio_api_lib.c.

References ezradio_comm_SendCmdGetResp().

void ezradio_get_property	(	uint8_t	group,
		uint8_t	num_props,
		uint8_t	start_prop,
		ezradio_cmd_reply_t *	ezradioReply
	)

Get property values from the radio. Reads them into ezradioReply union.

Parameters

[in]	group	Property group number.
[in]	num_props	Number of properties to be read.
[in]	start_prop	Starting sub-property number.
[out]	ezradioReply	Reply structure of the command.

Definition at line 387 of file ezradio_api_lib.c.

References ezradio_comm_SendCmdGetResp().

void ezradio_gpio_pin_cfg	(	uint8_t	gpio0,
		uint8_t	gpio1,
		uint8_t	gpio2,
		uint8_t	gpio3,
		uint8_t	nirq,
		uint8_t	sdo,
		uint8_t	gen_config,
		ezradio_cmd_reply_t *	ezradioReply
	)

Send GPIO pin config command to the radio and reads the answer into ezradioReply union.

Parameters

[in]	gpio0	GPIO0 configuration.
[in]	gpio1	GPIO1 configuration.
[in]	gpio2	GPIO2 configuration.
[in]	gpio3	GPIO3 configuration.
[in]	nirq	NIRQ configuration.
[in]	sdo	SDO configuration.
[in]	gen_config	General pin configuration.
[out]	ezradioReply	Reply structure of the command.

Definition at line 228 of file ezradio_api_lib.c.

References ezradio_comm_SendCmdGetResp().

void ezradio_gpio_pin_cfg_fast

(

ezradio_cmd_reply_t *

ezradioReply

)

Reads back current GPIO pin configuration. Does NOT configure GPIO pins

Parameters

[out]

ezradioReply

Reply structure of the command.

Definition at line 817 of file ezradio_api_lib.c.

References ezradio_comm_SendCmdGetResp().

void ezradio_ircal	(	uint8_t	searching_step_size,
		uint8_t	searching_rssi_avg,
		uint8_t	rx_chain_setting1,
		uint8_t	rx_chain_setting2
	)

Performs image rejection calibration. Completion can be monitored by polling CTS or waiting for CHIP_READY interrupt source.

Parameters

[in]	searching_step_size
[in]	searching_rssi_avg
[in]	rx_chain_setting1
[in]	rx_chain_setting2

Definition at line 151 of file ezradio_api_lib_add.c.

References ezradio_comm_SendCmd().

void ezradio_ircal_manual	(	uint8_t	ircal_amp,
		uint8_t	ircal_ph,
		ezradio_cmd_reply_t *	ezradioReply
	)

Image rejection calibration. Forces a specific value for IR calibration, and reads back calibration values from previous calibrations

Parameters

[in]	ircal_amp
[in]	ircal_ph
[out]	ezradioReply	Reply structure of the command.

Definition at line 172 of file ezradio_api_lib_add.c.

References ezradio_comm_SendCmdGetResp().

void ezradio_nop

(

void

)

Sends NOP command to the radio. Can be used to maintain SPI communication.

Definition at line 319 of file ezradio_api_lib.c.

References ezradio_comm_SendCmd().

void ezradio_part_info

(

ezradio_cmd_reply_t *

ezradioReply

)

This function sends the PART_INFO command to the radio and receives the answer into ezradioReply union.

Parameters

[out]

ezradioReply

Reply structure of the command.

Definition at line 101 of file ezradio_api_lib.c.

References ezradio_comm_SendCmdGetResp().

void ezradio_power_up	(	uint8_t	boot_options,
		uint8_t	xtal_options,
		uint32_t	xo_freq
	)

This function is used to initialize after power-up the radio chip. Before this function ezradio_reset should be called.

Parameters

[in]	boot_options	Boot options input to the power up command.
[in]	xtal_options	XTAL options input to the power up command.
[in]	xo_freq	XO frequency input to the power up command.

Definition at line 80 of file ezradio_api_lib.c.

References ezradio_comm_SendCmd().

void ezradio_read_cmd_buff

(

ezradio_cmd_reply_t *

ezradioReply

)

Reads the command buffer

Parameters

[out]

ezradioReply

Reply structure of the command.

Definition at line 582 of file ezradio_api_lib.c.

References ezradio_comm_SendCmdGetResp().

void ezradio_read_rx_fifo	(	uint8_t	numBytes,
		uint8_t *	pRxData
	)

Reads the RX FIFO content from the radio.

Parameters

[in]	numBytes	Data length to be read.
[in]	pRxData	Pointer to the buffer location.

Definition at line 374 of file ezradio_api_lib.c.

References ezradio_comm_ReadData().

void ezradio_request_device_state

(

ezradio_cmd_reply_t *

ezradioReply

)

Requests the current state of the device and lists pending TX and RX requests.

Parameters

[out]

ezradioReply

Reply structure of the command.

Definition at line 558 of file ezradio_api_lib.c.

References ezradio_comm_SendCmdGetResp().

Referenced by ezradioStartDirectTransmit(), ezradioStartPn9(), and ezradioStartUnmodulatedCarrier().

void ezradio_reset

(

void

)

This functions is used to reset the EZRadio device by applying shutdown and releasing it. After this function ezradio_power_up or ezradio_configuration_init should be called. The user can check if POR has completed by waiting 4 ms or by polling radio GPIO 0, 2, or 3. When these GPIOs are high, it is safe to call the above mentioned functions.

Definition at line 54 of file ezradio_api_lib.c.

References ezradio_comm_ClearCTS(), ezradio_hal_AssertShutdown(), ezradio_hal_DeassertShutdown(), USTIMER_DeInit(), USTIMER_Delay(), and USTIMER_Init().

void ezradio_rx_hop	(	uint8_t	inte,
		uint8_t	frac2,
		uint8_t	frac1,
		uint8_t	frac0,
		uint8_t	vco_cnt1,
		uint8_t	vco_cnt0
	)

While in RX state this will hop to the frequency specified by the parameters and start searching for a preamble.

Parameters

[in]	inte	new inte register value.
[in]	frac2	new frac2 register value.
[in]	frac1	new frac1 register value.
[in]	frac0	new frac0 register value.
[in]	vco_cnt1	new vco_cnt1 register value.
[in]	vco_cnt0	new vco_cnt0 register value.

Definition at line 233 of file ezradio_api_lib_add.c.

References ezradio_comm_SendCmd().

void ezradio_set_property	(	uint8_t	group,
		uint8_t	num_props,
		uint8_t	start_prop,
			...
	)

Send SET_PROPERTY command to the radio.

Parameters

[in]	group	Property group.
[in]	num_props	Number of property to be set. The properties must be in ascending order in their sub-property aspect. Max. 12 properties can be set in one command.
[in]	start_prop	Start sub-property address.
[in]	...	Variable number of properties to be set.

Definition at line 272 of file ezradio_api_lib.c.

References ezradio_comm_SendCmd().

void ezradio_start_rx	(	uint8_t	channel,
		uint8_t	condition,
		uint16_t	rx_len,
		uint8_t	next_state1,
		uint8_t	next_state2,
		uint8_t	next_state3
	)

Sends START_RX command to the radio.

Parameters

[in]	channel	Channel number.
[in]	condition	Start RX condition.
[in]	rx_len	Payload length (exclude the PH generated CRC).
[in]	next_state1	Next state when Preamble Timeout occurs.
[in]	next_state2	Next state when a valid packet received.
[in]	next_state3	Next state when invalid packet received (e.g. CRC error).

Definition at line 161 of file ezradio_api_lib.c.

References ezradio_comm_SendCmd().

Referenced by ezradioStartDirectReceive(), and ezradioStartRx().

void ezradio_start_rx_fast

(

void

)

Sends START_RX command ID to the radio with no input parameters

Definition at line 758 of file ezradio_api_lib.c.

References ezradio_comm_SendCmd().

void ezradio_start_tx	(	uint8_t	channel,
		uint8_t	condition,
		uint16_t	tx_len
	)

Sends START_TX command to the radio.

Parameters

[in]	channel	Channel number.
[in]	condition	Start TX condition.
[in]	tx_len	Payload length (exclude the PH generated CRC).

Definition at line 132 of file ezradio_api_lib.c.

References ezradio_comm_SendCmd().

Referenced by ezradioStartDirectTransmit(), ezradioStartPn9(), and ezradioStartUnmodulatedCarrier().

void ezradio_start_tx_fast

(

void

)

Sends START_TX command ID to the radio with no input parameters

Definition at line 744 of file ezradio_api_lib.c.

References ezradio_comm_SendCmd().

void ezradio_tx_hop	(	uint8_t	inte,
		uint8_t	frac2,
		uint8_t	frac1,
		uint8_t	frac0,
		uint8_t	vco_cnt1,
		uint8_t	vco_cnt0,
		uint8_t	pll_settle_time1,
		uint8_t	pll_settle_time0
	)

While in TX state this will hop to the frequency specified by the parameters

Parameters

[in]	inte	new inte register value.
[in]	frac2	new frac2 register value.
[in]	frac1	new frac1 register value.
[in]	frac0	new frac0 register value.
[in]	vco_cnt1	new vco_cnt1 register value.
[in]	vco_cnt0	new vco_cnt0 register value.
[in]	pll_settle_time1	new pll_settle_time1 register value.
[in]	pll_settle_time0	new pll_settle_time0 register value.

Definition at line 205 of file ezradio_api_lib_add.c.

References ezradio_comm_SendCmd().

void ezradio_write_ezconfig_array	(	uint8_t	numBytes,
		uint8_t *	pEzConfigArray
	)

Writes data byte(s) to the EZConfig array.

Parameters

[in]	numBytes	number of bytes to send
[in]	pEzConfigArray	pointer to the EZConfig configuration array

Definition at line 148 of file ezradio_api_lib_add.c.

References ezradio_comm_WriteData().

Referenced by ezradio_configuration_init().

void ezradio_write_tx_fifo	(	uint8_t	numBytes,
		uint8_t *	pTxData
	)

The function can be used to load data into TX FIFO.

Parameters

[in]	numBytes	Data length to be load.
[in]	pTxData	Pointer to the data (uint8_t*).

Definition at line 363 of file ezradio_api_lib.c.

References ezradio_comm_WriteData().