bsp.h File Reference

Detailed Description

Board support package API definitions.

Version

5.1.1

License

Copyright 2016 Silicon Labs, Inc. http://www.silabs.com

This file is licensed under the Silabs License Agreement. See the file "Silabs_License_Agreement.txt" for details. Before using this software for any purpose, you must agree to the terms of that agreement.

Definition in file bsp.h.

#include <stdbool.h>
#include "bspconfig.h"
#include "em_usart.h"

Go to the source code of this file.

Macros
#define	BSP_INIT_BCC   0x04
#define	BSP_INIT_DK_EBI   0x02
#define	BSP_INIT_DK_SPI   0x01
#define	BSP_INIT_IOEXP   0x08
#define	BSP_STATUS_ILLEGAL_PARAM   (-1)
#define	BSP_STATUS_IOEXP_FAILURE   (-4)
#define	BSP_STATUS_NOT_IMPLEMENTED   (-2)
#define	BSP_STATUS_OK   0
#define	BSP_STATUS_UNSUPPORTED_MODE   (-3)

Enumerations
enum	BSP_BusControl_TypeDef {   BSP_BusControl_Undefined =0,   BSP_BusControl_OFF,   BSP_BusControl_DIRECT,   BSP_BusControl_SPI,   BSP_BusControl_EBI }
enum	BSP_Display_TypeDef {   BSP_Display_EBI,   BSP_Display_SPI,   BSP_Display_BC,   BSP_Display_PowerEnable,   BSP_Display_PowerDisable,   BSP_Display_ResetAssert,   BSP_Display_ResetRelease,   BSP_Display_Mode8080,   BSP_Display_ModeGeneric }
enum	BSP_Peripheral_TypeDef {   BSP_RS232_SHUTDOWN,   BSP_RS232_UART,   BSP_RS232_LEUART,   BSP_I2C,   BSP_ETH,   BSP_I2S,   BSP_TRACE,   BSP_TOUCH,   BSP_AUDIO_IN,   BSP_AUDIO_OUT,   BSP_ANALOG_DIFF,   BSP_ANALOG_SE,   BSP_MICROSD,   BSP_TFT,   BSP_IOEXP_LEDS,   BSP_IOEXP_SENSORS,   BSP_IOEXP_DISPLAY,   BSP_IOEXP_VCOM }
enum	BSP_Peripheral_TypeDef {   BSP_RS232_SHUTDOWN,   BSP_RS232_UART,   BSP_RS232_LEUART,   BSP_I2C,   BSP_ETH,   BSP_I2S,   BSP_TRACE,   BSP_TOUCH,   BSP_AUDIO_IN,   BSP_AUDIO_OUT,   BSP_ANALOG_DIFF,   BSP_ANALOG_SE,   BSP_MICROSD,   BSP_TFT,   BSP_IOEXP_LEDS,   BSP_IOEXP_SENSORS,   BSP_IOEXP_DISPLAY,   BSP_IOEXP_VCOM }

Functions
int	BSP_BccDeInit (void)
	Deinitialize board controller communication support (BCC) functionality. Reverse actions performed by BSP_BccInit(). More...
int	BSP_BccInit (void)
	Initialize board controller communication support (BCC) functionality. More...
bool	BSP_BccPacketReceive (BCP_Packet *pkt)
	Get a packet from the board controller. More...
int	BSP_BccPacketSend (BCP_Packet *pkt)
	Send a packet to the board controller. More...
void	BSP_BccPinsEnable (bool enable)
	Enable GPIO pins for the USART/LEUART used for board communication. More...
BSP_BusControl_TypeDef	BSP_BusControlModeGet (void)
	Get current board controller bus decode logic configuration. More...
int	BSP_BusControlModeSet (BSP_BusControl_TypeDef mode)
	Configure Board Controller bus decode logic. More...
float	BSP_CurrentGet (void)
	Request AEM (Advanced Energy Monitoring) current from board controller. More...
uint32_t	BSP_DipSwitchGet (void)
	Get status of the DIP switches on the DK. More...
int	BSP_Disable (void)
	Deinitialize board support package functionality. Reverse actions performed by BSP_Init(). This function is a dummy on STK's. More...
int	BSP_DisplayControl (BSP_Display_TypeDef option)
	Configure display control. More...
int	BSP_EbiDeInit (void)
	Deinitialize the EBI interface for accessing the onboard nandflash. More...
int	BSP_EbiExtendedAddressRange (bool enable)
	Extended the EBI addressing range by enabling address lines A16-A22. On Gxxx_DK's this functions is a dummy. More...
int	BSP_EbiInit (void)
	Initialize the EBI interface for accessing the onboard nandflash. More...
int	BSP_EnergyModeSet (uint16_t energyMode)
	Inform board controller about current energy mode. More...
int	BSP_Init (uint32_t flags)
	Initialize board support package functionality. More...
int	BSP_InterruptDisable (uint16_t flags)
	Disable interrupts from board controller. More...
int	BSP_InterruptEnable (uint16_t flags)
	Enable interrupts from board controller. More...
int	BSP_InterruptFlagsClear (uint16_t flags)
	Clear board controller interrupt flags. More...
uint16_t	BSP_InterruptFlagsGet (void)
	Get board controller interrupt flags. More...
int	BSP_InterruptFlagsSet (uint16_t flags)
	Set board controller interrupt flags. More...
uint32_t	BSP_IOExpGetDeviceId (void)
	Get IO Expander Device id. More...
uint16_t	BSP_JoystickGet (void)
	Get status of joystick on the DK. More...
int	BSP_LedClear (int ledNo)
	Turn off a single LED. More...
int	BSP_LedGet (int ledNo)
	Get current status of a single LED. More...
int	BSP_LedSet (int ledNo)
	Turn on a single LED. More...
uint32_t	BSP_LedsGet (void)
	Get status of all LED's. More...
int	BSP_LedsInit (void)
	Initialize LED drivers. More...
int	BSP_LedsSet (uint32_t leds)
	Update all LED's. More...
int	BSP_LedToggle (int ledNo)
	Toggle a single LED. More...
int	BSP_McuBoard_DeInit (void)
	Disable MCU plugin board peripherals. More...
int	BSP_McuBoard_Init (void)
	Enable MCU plugin board peripherals. More...
int	BSP_McuBoard_UsbStatusLedEnable (bool enable)
	Set state of MCU plugin board USB status LED. More...
bool	BSP_McuBoard_UsbVbusOcFlagGet (void)
	Get state MCU plugin board VBUS overcurrent flag. More...
int	BSP_McuBoard_UsbVbusPowerEnable (bool enable)
	Enable MCU plugin board VBUS power switch. More...
int	BSP_PeripheralAccess (BSP_Peripheral_TypeDef perf, bool enable)
	DK Peripheral Access Control Enable or disable access to on-board peripherals through switches and SPI switch where applicable. Turn off conflicting peripherals when enabling another. More...
uint16_t	BSP_PushButtonsGet (void)
	Get status of the pushbutton switches on the DK. More...
uint16_t	BSP_RegisterRead (volatile uint16_t *addr)
	Read from a board controller register. More...
int	BSP_RegisterWrite (volatile uint16_t *addr, uint16_t data)
	Write to a board controller register. More...
float	BSP_VoltageGet (void)
	Request AEM (Advanced Energy Monitoring) voltage from board controller. More...