EFM32 Zero Gecko Software Documentation  efm32zg-doc-5.1.2
efm32zg_prs_signals.h File Reference

Detailed Description

EFM32ZG_PRS_SIGNALS register and bit field definitions.

Version
5.1.2

License

Copyright 2017 Silicon Laboratories, Inc. http://www.silabs.com

Permission is granted to anyone to use this software for any purpose, including commercial applications, and to alter it and redistribute it freely, subject to the following restrictions:

  1. The origin of this software must not be misrepresented; you must not claim that you wrote the original software.
  2. Altered source versions must be plainly marked as such, and must not be misrepresented as being the original software.
  3. This notice may not be removed or altered from any source distribution.

DISCLAIMER OF WARRANTY/LIMITATION OF REMEDIES: Silicon Laboratories, Inc. has no obligation to support this Software. Silicon Laboratories, Inc. is providing the Software "AS IS", with no express or implied warranties of any kind, including, but not limited to, any implied warranties of merchantability or fitness for any particular purpose or warranties against infringement of any proprietary rights of a third party.

Silicon Laboratories, Inc. will not be liable for any consequential, incidental, or special damages, or any other relief, or for any claim by any third party, arising from your use of this Software.

Definition in file efm32zg_prs_signals.h.

Go to the source code of this file.

Macros

#define PRS_ACMP0_OUT   ((2 << 16) + 0)
 
#define PRS_ADC0_SCAN   ((8 << 16) + 1)
 
#define PRS_ADC0_SINGLE   ((8 << 16) + 0)
 
#define PRS_GPIO_PIN0   ((48 << 16) + 0)
 
#define PRS_GPIO_PIN1   ((48 << 16) + 1)
 
#define PRS_GPIO_PIN10   ((49 << 16) + 2)
 
#define PRS_GPIO_PIN11   ((49 << 16) + 3)
 
#define PRS_GPIO_PIN12   ((49 << 16) + 4)
 
#define PRS_GPIO_PIN13   ((49 << 16) + 5)
 
#define PRS_GPIO_PIN14   ((49 << 16) + 6)
 
#define PRS_GPIO_PIN15   ((49 << 16) + 7)
 
#define PRS_GPIO_PIN2   ((48 << 16) + 2)
 
#define PRS_GPIO_PIN3   ((48 << 16) + 3)
 
#define PRS_GPIO_PIN4   ((48 << 16) + 4)
 
#define PRS_GPIO_PIN5   ((48 << 16) + 5)
 
#define PRS_GPIO_PIN6   ((48 << 16) + 6)
 
#define PRS_GPIO_PIN7   ((48 << 16) + 7)
 
#define PRS_GPIO_PIN8   ((49 << 16) + 0)
 
#define PRS_GPIO_PIN9   ((49 << 16) + 1)
 
#define PRS_PCNT0_TCC   ((54 << 16) + 0)
 
#define PRS_RTC_COMP0   ((40 << 16) + 1)
 
#define PRS_RTC_COMP1   ((40 << 16) + 2)
 
#define PRS_RTC_OF   ((40 << 16) + 0)
 
#define PRS_TIMER0_CC0   ((28 << 16) + 2)
 
#define PRS_TIMER0_CC1   ((28 << 16) + 3)
 
#define PRS_TIMER0_CC2   ((28 << 16) + 4)
 
#define PRS_TIMER0_OF   ((28 << 16) + 1)
 
#define PRS_TIMER0_UF   ((28 << 16) + 0)
 
#define PRS_TIMER1_CC0   ((29 << 16) + 2)
 
#define PRS_TIMER1_CC1   ((29 << 16) + 3)
 
#define PRS_TIMER1_CC2   ((29 << 16) + 4)
 
#define PRS_TIMER1_OF   ((29 << 16) + 1)
 
#define PRS_TIMER1_UF   ((29 << 16) + 0)
 
#define PRS_USART1_IRTX   ((17 << 16) + 0)
 
#define PRS_USART1_RXDATAV   ((17 << 16) + 2)
 
#define PRS_USART1_TXC   ((17 << 16) + 1)
 
#define PRS_VCMP_OUT   ((1 << 16) + 0)