Detailed Description

Liquid Crystal Display (LCD) Peripheral API.

This module contains functions to control the LDC peripheral of Silicon Labs 32-bit MCUs and SoCs. The LCD driver can drive up to 8x36 segmented LCD directly. The animation feature makes it possible to have active animations without CPU intervention.

Data Structures
struct	LCD_AnimInit_TypeDef

struct	LCD_FrameCountInit_TypeDef

struct	LCD_Init_TypeDef

Macros
#define	LCD_INIT_DEFAULT

Enumerations
enum	LCD_AnimLogic_TypeDef { lcdAnimLogicAnd = LCD_BACTRL_ALOGSEL_AND, lcdAnimLogicOr = LCD_BACTRL_ALOGSEL_OR }

enum	LCD_AnimShift_TypeDef { lcdAnimShiftNone = _LCD_BACTRL_AREGASC_NOSHIFT, lcdAnimShiftLeft = _LCD_BACTRL_AREGASC_SHIFTLEFT, lcdAnimShiftRight = _LCD_BACTRL_AREGASC_SHIFTRIGHT }

enum	LCD_Bias_TypeDef { lcdBiasStatic = LCD_DISPCTRL_BIAS_STATIC, lcdBiasOneHalf = LCD_DISPCTRL_BIAS_ONEHALF, lcdBiasOneThird = LCD_DISPCTRL_BIAS_ONETHIRD, lcdBiasOneFourth = LCD_DISPCTRL_BIAS_ONEFOURTH }

enum	LCD_ConConf_TypeDef { lcdConConfVLCD = LCD_DISPCTRL_CONCONF_VLCD, lcdConConfGND = LCD_DISPCTRL_CONCONF_GND }

enum	LCD_FCPreScale_TypeDef { lcdFCPrescDiv1 = LCD_BACTRL_FCPRESC_DIV1, lcdFCPrescDiv2 = LCD_BACTRL_FCPRESC_DIV2, lcdFCPrescDiv4 = LCD_BACTRL_FCPRESC_DIV4, lcdFCPrescDiv8 = LCD_BACTRL_FCPRESC_DIV8 }

enum	LCD_Mux_TypeDef { lcdMuxStatic = LCD_DISPCTRL_MUX_STATIC, lcdMuxDuplex = LCD_DISPCTRL_MUX_DUPLEX, lcdMuxTriplex = LCD_DISPCTRL_MUX_TRIPLEX, lcdMuxQuadruplex = LCD_DISPCTRL_MUX_QUADRUPLEX, lcdMuxSextaplex = LCD_DISPCTRL_MUXE_MUXE \| LCD_DISPCTRL_MUX_DUPLEX, lcdMuxOctaplex = LCD_DISPCTRL_MUXE_MUXE \| LCD_DISPCTRL_MUX_QUADRUPLEX }

enum	LCD_SegmentRange_TypeDef { lcdSegment0_3 = (1 << 0), lcdSegment4_7 = (1 << 1), lcdSegment8_11 = (1 << 2), lcdSegment12_15 = (1 << 3), lcdSegment16_19 = (1 << 4), lcdSegment20_23 = (1 << 5), lcdSegment24_27 = (1 << 6), lcdSegment28_31 = (1 << 7), lcdSegment32_35 = (1 << 8), lcdSegment36_39 = (1 << 9), lcdSegmentAll = (0x03ff) }

enum	LCD_UpdateCtrl_TypeDef { lcdUpdateCtrlRegular = LCD_CTRL_UDCTRL_REGULAR, lcdUpdateCtrlFCEvent = LCD_CTRL_UDCTRL_FCEVENT, lcdUpdateCtrlFrameStart = LCD_CTRL_UDCTRL_FRAMESTART }

enum	LCD_VBoostLevel_TypeDef { lcdVBoostLevel0 = LCD_DISPCTRL_VBLEV_LEVEL0, lcdVBoostLevel1 = LCD_DISPCTRL_VBLEV_LEVEL1, lcdVBoostLevel2 = LCD_DISPCTRL_VBLEV_LEVEL2, lcdVBoostLevel3 = LCD_DISPCTRL_VBLEV_LEVEL3, lcdVBoostLevel4 = LCD_DISPCTRL_VBLEV_LEVEL4, lcdVBoostLevel5 = LCD_DISPCTRL_VBLEV_LEVEL5, lcdVBoostLevel6 = LCD_DISPCTRL_VBLEV_LEVEL6, lcdVBoostLevel7 = LCD_DISPCTRL_VBLEV_LEVEL7 }

enum	LCD_VLCDSel_TypeDef { lcdVLCDSelVDD = LCD_DISPCTRL_VLCDSEL_VDD, lcdVLCDSelVExtBoost = LCD_DISPCTRL_VLCDSEL_VEXTBOOST }

enum	LCD_Wave_TypeDef { lcdWaveLowPower = LCD_DISPCTRL_WAVE_LOWPOWER, lcdWaveNormal = LCD_DISPCTRL_WAVE_NORMAL }

Functions
__STATIC_INLINE void	LCD_AnimEnable (bool enable)
	Enables or disables LCD Animation feature. More...

void	LCD_AnimInit (const LCD_AnimInit_TypeDef *animInit)
	Configures LCD controller Animation feature. More...

__STATIC_INLINE int	LCD_AnimState (void)
	Returns current animation state. More...

void	LCD_BiasComSet (int comLine, int biasLevel)
	Configure bias level for a specific segment line. More...

void	LCD_BiasSegmentSet (int segmentLine, int biasLevel)
	Configure bias level for a specific segment line for Direct Segment Control. More...

__STATIC_INLINE void	LCD_BlankEnable (bool enable)
	Disables all segments, while keeping segment state. More...

__STATIC_INLINE void	LCD_BlinkEnable (bool enable)
	Enables or disables LCD blink. More...

__STATIC_INLINE int	LCD_BlinkState (void)
	Returns current blink state. More...

void	LCD_ContrastSet (int level)
	Configure contrast level on LCD panel. More...

__STATIC_INLINE void	LCD_DSCEnable (bool enable)
	Enable or disable LCD Direct Segment Control. More...

__STATIC_INLINE void	LCD_Enable (bool enable)
	Enable or disable LCD controller. More...

__STATIC_INLINE void	LCD_FrameCountEnable (bool enable)
	Enables or disables LCD Frame Control. More...

void	LCD_FrameCountInit (const LCD_FrameCountInit_TypeDef *fcInit)
	Initialize LCD Frame Counter. More...

__STATIC_INLINE void	LCD_FreezeEnable (bool enable)
	When set, LCD registers will not be updated until cleared,. More...

void	LCD_Init (const LCD_Init_TypeDef *lcdInit)
	Initalize Liquid Crystal Display (LCD) controller. More...

__STATIC_INLINE void	LCD_IntClear (uint32_t flags)
	Clear one or more interrupt flags. More...

__STATIC_INLINE void	LCD_IntDisable (uint32_t flags)
	Disable LCD interrupts. More...

__STATIC_INLINE void	LCD_IntEnable (uint32_t flags)
	Enable LCD interrupts. More...

__STATIC_INLINE uint32_t	LCD_IntGet (void)
	Get pending LCD interrupt flags. More...

__STATIC_INLINE uint32_t	LCD_IntGetEnabled (void)
	Get enabled and pending LCD interrupt flags. More...

__STATIC_INLINE void	LCD_IntSet (uint32_t flags)
	Set one or more pending LCD interrupts from SW. More...

void	LCD_SegmentRangeEnable (LCD_SegmentRange_TypeDef segmentRange, bool enable)
	Enables update of this range of LCD segment lines. More...

void	LCD_SegmentSet (int com, int bit, bool enable)
	Turn on or clear a segment. More...

void	LCD_SegmentSetHigh (int com, uint32_t mask, uint32_t bits)
	Updated the high (32-39) segments on a given COM-line in one operation. More...

void	LCD_SegmentSetLow (int com, uint32_t mask, uint32_t bits)
	Updates the 0-31 lowest segments on a given COM-line in one operation, according to bit mask. More...

__STATIC_INLINE void	LCD_SyncBusyDelay (uint32_t flags)
	Polls LCD SYNCBUSY flags, until flag has been cleared. More...

__STATIC_INLINE uint32_t	LCD_SyncBusyGet (void)
	Returns SYNCBUSY bits, indicating which registers have pending updates. More...

void	LCD_UpdateCtrl (LCD_UpdateCtrl_TypeDef ud)
	Configure Update Control. More...

void	LCD_VBoostSet (LCD_VBoostLevel_TypeDef vboost)
	Configure voltage booster. More...

void	LCD_VLCDSelect (LCD_VLCDSel_TypeDef vlcd)
	Select source for VLCD. More...

Macro Definition Documentation

#define LCD_INIT_DEFAULT

Value:

{                        \
  true,                  \
  lcdMuxQuadruplex,      \
  lcdBiasOneThird,       \
  lcdWaveLowPower,       \
  lcdVLCDSelVDD,         \
  lcdConConfVLCD         \
}

Default config for LCD init structure, enables 160 segments

Definition at line 265 of file em_lcd.h.

Enumeration Type Documentation

enum LCD_AnimLogic_TypeDef

Animation Logic Control, how AReg and BReg should be combined

Enumerator
lcdAnimLogicAnd	Use bitwise logic AND to mix animation register A (AREGA) and B (AREGB)
lcdAnimLogicOr	Use bitwise logic OR to mix animation register A (AREGA) and B (AREGB)

Definition at line 202 of file em_lcd.h.

enum LCD_AnimShift_TypeDef

Animation Shift operation; none, left or right

Enumerator
lcdAnimShiftNone	No shift
lcdAnimShiftLeft	Shift segment bits left
lcdAnimShiftRight	Shift segment bits right

Definition at line 191 of file em_lcd.h.

enum LCD_Bias_TypeDef

Bias setting

Enumerator
lcdBiasStatic	Static (2 levels)
lcdBiasOneHalf	1/2 Bias (3 levels)
lcdBiasOneThird	1/3 Bias (4 levels)
lcdBiasOneFourth	1/4 Bias (5 levels)

Definition at line 80 of file em_lcd.h.

enum LCD_ConConf_TypeDef

Contrast Configuration

Enumerator
lcdConConfVLCD	Contrast is adjusted relative to VDD (VLCD)
lcdConConfGND	Contrast is adjusted relative to Ground

Definition at line 113 of file em_lcd.h.

enum LCD_FCPreScale_TypeDef

Frame Counter Clock Prescaler, FC-CLK = FrameRate (Hz) / this factor

Enumerator
lcdFCPrescDiv1	Prescale Div 1
lcdFCPrescDiv2	Prescale Div 2
lcdFCPrescDiv4	Prescale Div 4
lcdFCPrescDiv8	Prescale Div 8

Definition at line 135 of file em_lcd.h.

enum LCD_Mux_TypeDef

MUX setting

Enumerator
lcdMuxStatic	Static (segments can be multiplexed with LCD_COM[0])
lcdMuxDuplex	Duplex / 1/2 Duty cycle (segments can be multiplexed with LCD_COM[0:1])
lcdMuxTriplex	Triplex / 1/3 Duty cycle (segments can be multiplexed with LCD_COM[0:2])
lcdMuxQuadruplex	Quadruplex / 1/4 Duty cycle (segments can be multiplexed with LCD_COM[0:3])
lcdMuxSextaplex	Sextaplex / 1/6 Duty cycle (segments can be multiplexed with LCD_COM[0:5])
lcdMuxOctaplex	Octaplex / 1/6 Duty cycle (segments can be multiplexed with LCD_COM[0:5])

Definition at line 61 of file em_lcd.h.

enum LCD_SegmentRange_TypeDef

Segment selection

Enumerator
lcdSegment0_3	Select segment lines 0 to 3
lcdSegment4_7	Select segment lines 4 to 7
lcdSegment8_11	Select segment lines 8 to 11
lcdSegment12_15	Select segment lines 12 to 15
lcdSegment16_19	Select segment lines 16 to 19
lcdSegment20_23	Select segment lines 20 to 23
lcdSegment24_27	Select segment lines 24 to 27
lcdSegment28_31	Select segment lines 28 to 31
lcdSegment32_35	Select segment lines 32 to 35
lcdSegment36_39	Select segment lines 36 to 39
lcdSegmentAll	Select all segment lines

Definition at line 148 of file em_lcd.h.

enum LCD_UpdateCtrl_TypeDef

Update Data Control

Enumerator
lcdUpdateCtrlRegular	Regular update, data transfer done immediately
lcdUpdateCtrlFCEvent	Data transfer done at Frame Counter event
lcdUpdateCtrlFrameStart	Data transfer done at Frame Start

Definition at line 180 of file em_lcd.h.

enum LCD_VBoostLevel_TypeDef

Voltage Boost Level - Datasheets document setting for each part number

Enumerator
lcdVBoostLevel0	Voltage boost LEVEL0
lcdVBoostLevel1	Voltage boost LEVEL1
lcdVBoostLevel2	Voltage boost LEVEL2
lcdVBoostLevel3	Voltage boost LEVEL3
lcdVBoostLevel4	Voltage boost LEVEL4
lcdVBoostLevel5	Voltage boost LEVEL5
lcdVBoostLevel6	Voltage boost LEVEL6
lcdVBoostLevel7	Voltage boost LEVEL7

Definition at line 122 of file em_lcd.h.

enum LCD_VLCDSel_TypeDef

VLCD Voltage Source

Enumerator
lcdVLCDSelVDD	VLCD Powered by VDD
lcdVLCDSelVExtBoost	VLCD Powered by external VDD / Voltage Boost

Definition at line 104 of file em_lcd.h.

enum LCD_Wave_TypeDef

Wave type

Enumerator
lcdWaveLowPower	Low power optimized waveform output
lcdWaveNormal	Regular waveform output

Definition at line 95 of file em_lcd.h.

Function Documentation

__STATIC_INLINE void LCD_AnimEnable ( bool enable )

Enables or disables LCD Animation feature.

Parameters

[in] enable Boolean true enables animation, false disables animation

Definition at line 328 of file em_lcd.h.

References LCD, and LCD_BACTRL_AEN.

Referenced by LCD_AnimInit().

void LCD_AnimInit ( const LCD_AnimInit_TypeDef * animInit )

Configures LCD controller Animation feature.

Parameters

[in] animInit Pointer to LCD Animation initialization structure

Definition at line 183 of file em_lcd.c.

References _LCD_BACTRL_ALOC_MASK, _LCD_BACTRL_ALOGSEL_MASK, _LCD_BACTRL_AREGASC_MASK, _LCD_BACTRL_AREGASC_SHIFT, _LCD_BACTRL_AREGBSC_MASK, _LCD_BACTRL_AREGBSC_SHIFT, LCD_AnimInit_TypeDef::animLogic, LCD_AnimInit_TypeDef::AReg, LCD_AnimInit_TypeDef::AShift, LCD_AnimInit_TypeDef::BReg, LCD_AnimInit_TypeDef::BShift, LCD_AnimInit_TypeDef::enable, LCD, LCD_AnimEnable(), LCD_BACTRL_ALOC_SEG0TO7, LCD_BACTRL_ALOC_SEG8TO15, and LCD_AnimInit_TypeDef::startSeg.

__STATIC_INLINE int LCD_AnimState ( void )

Returns current animation state.

Returns: Animation state, in range 0-15

Definition at line 408 of file em_lcd.h.

References _LCD_STATUS_ASTATE_MASK, _LCD_STATUS_ASTATE_SHIFT, and LCD.

void LCD_BiasComSet	(	int	comLine,
		int	biasLevel
	)

Configure bias level for a specific segment line.

Note: When DSC is active, each configuration takes up 4 bits in the Segment Registers (SEGD4L/SEGD4H) which defines bias level. For optimal use of this feature, the entire SEGD-registers should be set at once in a optimized routine, so this function is mainly here to demonstrate how to correctly configure the bias levels, and should be used with care.

Parameters

[in]	comLine	COM line number, 0-7
[in]	biasLevel	Bias configuration level, 0-4. This value must be within the constraint defined by the LCD_DISPCTRL bias setting, see Reference Manual/Datasheet

Definition at line 755 of file em_lcd.c.

References LCD.

void LCD_BiasSegmentSet	(	int	segmentLine,
		int	biasLevel
	)

Configure bias level for a specific segment line for Direct Segment Control.

Note: When DSC is active, each configuration takes up 4 bits in the Segment Registers (SEGD0L/SEGD1H) which defines bias level. For optimal use of this feature, the entire SEGD-registers should be set at once in a optimized routine, so this function is mainly here to demonstrate how to correctly configure the bias levels, and should be used with care.

Parameters

[in]	segmentLine	Segment line number
[in]	biasLevel	Bias configuration level, 0-4. This value must be within the constraint defined by the LCD_DISPCTRL bias setting, see Reference Manual/Datasheet

Definition at line 637 of file em_lcd.c.

References LCD.

__STATIC_INLINE void LCD_BlankEnable ( bool enable )

Disables all segments, while keeping segment state.

Parameters

[in] enable Boolean true clears all segments, boolean false restores all segment lines

Definition at line 368 of file em_lcd.h.

References LCD, and LCD_BACTRL_BLANK.

__STATIC_INLINE void LCD_BlinkEnable ( bool enable )

Enables or disables LCD blink.

Parameters

[in] enable Boolean true enables blink, false disables blink

Definition at line 348 of file em_lcd.h.

References LCD, and LCD_BACTRL_BLINKEN.

__STATIC_INLINE int LCD_BlinkState ( void )

Returns current blink state.

Returns: Return value is 1 if segments are enabled, 0 if disabled

Definition at line 421 of file em_lcd.h.

References _LCD_STATUS_BLINK_MASK, _LCD_STATUS_BLINK_SHIFT, and LCD.

void LCD_ContrastSet ( int level )

Configure contrast level on LCD panel.

Parameters

[in] level Contrast level in the range 0-31

Definition at line 592 of file em_lcd.c.

References _LCD_DISPCTRL_CONLEV_MASK, _LCD_DISPCTRL_CONLEV_SHIFT, and LCD.

__STATIC_INLINE void LCD_DSCEnable ( bool enable )

Enable or disable LCD Direct Segment Control.

Parameters

[in] enable If true, enables LCD controller Direct Segment Control Segment and COM line bias levels needs to be set explicitly with the LCD_BiasSegmentSet() and LCD_BiasComSet() function calls.

Definition at line 590 of file em_lcd.h.

References LCD, and LCD_CTRL_DSC.

__STATIC_INLINE void LCD_Enable ( bool enable )

Enable or disable LCD controller.

Parameters

[in] enable If true, enables LCD controller with current configuration, if false disables LCD controller. CMU clock for LCD must be enabled for correct operation.

Definition at line 308 of file em_lcd.h.

References LCD, and LCD_CTRL_EN.

Referenced by LCD_Init(), and SegmentLCD_Disable().

__STATIC_INLINE void LCD_FrameCountEnable ( bool enable )

Enables or disables LCD Frame Control.

Parameters

[in] enable Boolean true enables frame counter, false disables frame counter

Definition at line 388 of file em_lcd.h.

References LCD, and LCD_BACTRL_FCEN.

Referenced by LCD_FrameCountInit().

void LCD_FrameCountInit ( const LCD_FrameCountInit_TypeDef * fcInit )

Initialize LCD Frame Counter.

Parameters

[in] fcInit Pointer to Frame Counter initialization structure

Definition at line 154 of file em_lcd.c.

References _LCD_BACTRL_FCPRESC_MASK, _LCD_BACTRL_FCTOP_MASK, _LCD_BACTRL_FCTOP_SHIFT, LCD_FrameCountInit_TypeDef::enable, LCD, LCD_FrameCountEnable(), LCD_FrameCountInit_TypeDef::prescale, and LCD_FrameCountInit_TypeDef::top.

__STATIC_INLINE void LCD_FreezeEnable ( bool enable )

When set, LCD registers will not be updated until cleared,.

Parameters

[in] enable When enable is true, update is stopped, when false all registers are updated

Definition at line 435 of file em_lcd.h.

References LCD, LCD_FREEZE_REGFREEZE_FREEZE, and LCD_FREEZE_REGFREEZE_UPDATE.

Referenced by SegmentLCD_Number(), SegmentLCD_UnsignedHex(), and SegmentLCD_Write().

void LCD_Init ( const LCD_Init_TypeDef * lcdInit )

Initalize Liquid Crystal Display (LCD) controller.

This function call will only configure the LCD controller. You must enable it afterwards, potentially configuring Frame Control and interrupts first according to requirements.

Parameters

[in] lcdInit Pointer to initialization structure which configures LCD controller.

Definition at line 67 of file em_lcd.c.

References _LCD_DISPCTRL_BIAS_MASK, _LCD_DISPCTRL_CONCONF_MASK, _LCD_DISPCTRL_MUX_MASK, _LCD_DISPCTRL_MUXE_MASK, _LCD_DISPCTRL_VLCDSEL_MASK, _LCD_DISPCTRL_WAVE_MASK, LCD_Init_TypeDef::bias, LCD_Init_TypeDef::contrast, LCD_Init_TypeDef::enable, LCD, LCD_Enable(), LCD_Init_TypeDef::mux, LCD_Init_TypeDef::vlcd, and LCD_Init_TypeDef::wave.

Referenced by SegmentLCD_Init().

__STATIC_INLINE void LCD_IntClear ( uint32_t flags )

Clear one or more interrupt flags.

Parameters

[in] flags LCD interrupt sources to clear. Use a set of interrupt flags OR-ed together to clear multiple interrupt sources for the LCD module (LCD_IFS_nnn).

Definition at line 574 of file em_lcd.h.

References LCD.

__STATIC_INLINE void LCD_IntDisable ( uint32_t flags )

Disable LCD interrupts.

Parameters

[in] flags LCD interrupt sources to disable. Use a set of interrupt flags OR-ed together to disable multiple interrupt sources for the LCD module (LCD_IFS_nnn).

Definition at line 559 of file em_lcd.h.

References LCD.

Referenced by SegmentLCD_Init().

__STATIC_INLINE void LCD_IntEnable ( uint32_t flags )

Enable LCD interrupts.

Parameters

[in] flags LCD interrupt sources to enable. Use a set of interrupt flags OR-ed together to set multiple interrupt sources for the LCD module (LCD_IFS_nnn).

Definition at line 544 of file em_lcd.h.

References LCD.

__STATIC_INLINE uint32_t LCD_IntGet ( void )

Get pending LCD interrupt flags.

Returns: Pending LCD interrupt sources. Returns a set of interrupt flags OR-ed together for multiple interrupt sources in the LCD module (LCD_IFS_nnn).

Definition at line 483 of file em_lcd.h.

References LCD.

__STATIC_INLINE uint32_t LCD_IntGetEnabled ( void )

Get enabled and pending LCD interrupt flags.

Useful for handling more interrupt sources in the same interrupt handler.

Note: The event bits are not cleared by the use of this function.

Returns

Pending and enabled LCD interrupt sources. The return value is the bitwise AND combination of

the OR combination of enabled interrupt sources in LCD_IEN_nnn register (LCD_IEN_nnn) and
the bitwise OR combination of valid interrupt flags of the LCD module (LCD_IF_nnn).

Definition at line 507 of file em_lcd.h.

References LCD.

__STATIC_INLINE void LCD_IntSet ( uint32_t flags )

Set one or more pending LCD interrupts from SW.

Parameters

[in] flags LCD interrupt sources to set to pending. Use a set of interrupt flags OR-ed together to set multiple interrupt sources for the LCD module (LCD_IFS_nnn).

Definition at line 529 of file em_lcd.h.

References LCD.

void LCD_SegmentRangeEnable	(	LCD_SegmentRange_TypeDef	segmentRange,
		bool	enable
	)

Enables update of this range of LCD segment lines.

Parameters

[in]	segmentRange	Range of 4 LCD segments lines to enable or disable, for all enabled COM lines
[in]	enable	Bool true to enable segment updates, false to disable updates

Definition at line 234 of file em_lcd.c.

References LCD.

void LCD_SegmentSet	(	int	com,
		int	bit,
		bool	enable
	)

Turn on or clear a segment.

Note: On Gecko Family, max configuration is (COM-lines x Segment-Lines) 4x40 On Tiny Family, max configuration is 8x20 or 4x24 On Giant Family, max configuration is 8x36 or 4x40

Parameters

[in]	com	COM line to change
[in]	bit	Bit index of which field to change
[in]	enable	When true will set segment, when false will clear segment

Definition at line 265 of file em_lcd.c.

References BUS_RegBitWrite(), and LCD.

Referenced by displayBlock(), SegmentLCD_ARing(), SegmentLCD_Battery(), SegmentLCD_EnergyMode(), SegmentLCD_Number(), SegmentLCD_Symbol(), SegmentLCD_UnsignedHex(), and SegmentLCD_Write().

void LCD_SegmentSetHigh	(	int	com,
		uint32_t	mask,
		uint32_t	bits
	)

Updated the high (32-39) segments on a given COM-line in one operation.

Parameters

[in]	com	Which COM line to update
[in]	mask	Bit mask for segments 32-39
[in]	bits	Bit pattern for segments 32-39

Definition at line 510 of file em_lcd.c.

References LCD.

void LCD_SegmentSetLow	(	int	com,
		uint32_t	mask,
		uint32_t	bits
	)

Updates the 0-31 lowest segments on a given COM-line in one operation, according to bit mask.

Parameters

[in]	com	Which COM line to update
[in]	mask	Bit mask for segments 0-31
[in]	bits	Bit pattern for segments 0-31

Definition at line 419 of file em_lcd.c.

References LCD.

__STATIC_INLINE void LCD_SyncBusyDelay ( uint32_t flags )

Polls LCD SYNCBUSY flags, until flag has been cleared.

Parameters

[in] flags Bit fields for LCD registers that shall be updated before we continue

Definition at line 468 of file em_lcd.h.

References LCD.

Referenced by SegmentLCD_Disable(), SegmentLCD_Init(), SegmentLCD_Number(), SegmentLCD_UnsignedHex(), and SegmentLCD_Write().

__STATIC_INLINE uint32_t LCD_SyncBusyGet ( void )

Returns SYNCBUSY bits, indicating which registers have pending updates.

Returns: Bit fields for LCD registers which have pending updates

Definition at line 455 of file em_lcd.h.

References LCD.

void LCD_UpdateCtrl ( LCD_UpdateCtrl_TypeDef ud )

Configure Update Control.

Parameters

[in] ud Configures LCD update method

Definition at line 141 of file em_lcd.c.

References _LCD_CTRL_UDCTRL_MASK, and LCD.

void LCD_VBoostSet ( LCD_VBoostLevel_TypeDef vboost )

Configure voltage booster.

The resulting voltage level is described in each part number's data sheet

Parameters

[in] vboost Voltage boost level

Definition at line 610 of file em_lcd.c.

References _LCD_DISPCTRL_VBLEV_MASK, and LCD.

Referenced by SegmentLCD_Init().

void LCD_VLCDSelect ( LCD_VLCDSel_TypeDef vlcd )

Select source for VLCD.

Parameters

[in] vlcd Select source for VLD voltage

Definition at line 112 of file em_lcd.c.

References _LCD_DISPCTRL_VLCDSEL_MASK, LCD, LCD_DISPCTRL_VLCDSEL_VDD, LCD_DISPCTRL_VLCDSEL_VEXTBOOST, lcdVLCDSelVDD, and lcdVLCDSelVExtBoost.

Referenced by SegmentLCD_Init().

Detailed Description

Data Structures

Macros

Enumerations

Functions

Macro Definition Documentation

Enumeration Type Documentation

Function Documentation