Detailed Description

Macros
#define	BSP_INIT_BCC 0x04

#define	BSP_INIT_DK_EBI 0x02

#define	BSP_INIT_DK_SPI 0x01

#define	BSP_INIT_IOEXP 0x08

#define	BSP_STATUS_ILLEGAL_PARAM (-1)

#define	BSP_STATUS_IOEXP_FAILURE (-4)

#define	BSP_STATUS_NOT_IMPLEMENTED (-2)

#define	BSP_STATUS_OK 0

#define	BSP_STATUS_UNSUPPORTED_MODE (-3)

Functions
int	BSP_Disable (void)
	Deinitialize board support package functionality. Reverse actions performed by BSP_Init(). This function is a dummy on STK's. More...

int	BSP_Init (uint32_t flags)
	Initialize board support package functionality. More...

int	BSP_LedClear (int ledNo)
	Turn off a single LED. More...

int	BSP_LedGet (int ledNo)
	Get current status of a single LED. More...

int	BSP_LedSet (int ledNo)
	Turn on a single LED. More...

uint32_t	BSP_LedsGet (void)
	Get status of all LED's. More...

int	BSP_LedsInit (void)
	Initialize LED drivers. More...

int	BSP_LedsSet (uint32_t leds)
	Update all LED's. More...

int	BSP_LedToggle (int ledNo)
	Toggle a single LED. More...

int	BSP_PeripheralAccess (BSP_Peripheral_TypeDef perf, bool enable)
	DK Peripheral Access Control Enable or disable access to on-board peripherals through switches and SPI switch where applicable. Turn off conflicting peripherals when enabling another. More...

__STATIC_INLINE void	BSP_TraceProfilerEnable (bool enable)
	Set or clear word in user page which enables or disables SWO in BSP_TraceProfilerSetup. If BSP_TraceProfilerEnable(false) has been run, no example project will enable SWO trace. More...

bool	BSP_TraceProfilerSetup (void)
	Profiler configuration. More...

void	BSP_TraceSwoSetup (void)
	Configure trace output for energyAware Profiler. More...

Macro Definition Documentation

#define BSP_INIT_BCC 0x04

Mode flag for BSP_Init(), init board controller communication.

Definition at line 54 of file bsp.h.

#define BSP_INIT_DK_EBI 0x02

Mode flag for BSP_Init(), init DK in EBI mode (DK3x50 only).

Definition at line 53 of file bsp.h.

Referenced by BSP_Disable(), BSP_Init(), BSP_RegisterRead(), and BSP_RegisterWrite().

#define BSP_INIT_DK_SPI 0x01

Mode flag for BSP_Init(), init DK in SPI mode (DK3x50 only).

Definition at line 52 of file bsp.h.

Referenced by BSP_Disable(), and BSP_Init().

#define BSP_INIT_IOEXP 0x08

Mode flag for BSP_Init(), init io-expander on some radio boards

Definition at line 55 of file bsp.h.

#define BSP_STATUS_ILLEGAL_PARAM (-1)

BSP API return code, illegal input parameter.

Definition at line 46 of file bsp.h.

Referenced by BSP_BusControlModeSet(), BSP_LedClear(), BSP_LedGet(), BSP_LedSet(), and BSP_LedToggle().

#define BSP_STATUS_IOEXP_FAILURE (-4)

BSP API return code, io-expander communication failed

Definition at line 49 of file bsp.h.

#define BSP_STATUS_NOT_IMPLEMENTED (-2)

BSP API return code, function not implemented (dummy).

Definition at line 47 of file bsp.h.

Referenced by BSP_EbiDeInit(), BSP_EbiInit(), BSP_McuBoard_UsbStatusLedEnable(), and BSP_McuBoard_UsbVbusPowerEnable().

#define BSP_STATUS_OK 0

BSP API return code, no errors.

Definition at line 45 of file bsp.h.

Referenced by BSP_BccDeInit(), BSP_BccInit(), BSP_BccPacketSend(), BSP_BusControlModeSet(), BSP_Disable(), BSP_DisplayControl(), BSP_EbiDeInit(), BSP_EbiExtendedAddressRange(), BSP_EbiInit(), BSP_EnergyModeSet(), BSP_Init(), BSP_InterruptDisable(), BSP_InterruptEnable(), BSP_InterruptFlagsClear(), BSP_InterruptFlagsSet(), BSP_LedClear(), BSP_LedSet(), BSP_LedsInit(), BSP_LedsSet(), BSP_LedToggle(), BSP_McuBoard_DeInit(), BSP_McuBoard_Init(), BSP_McuBoard_UsbStatusLedEnable(), BSP_McuBoard_UsbVbusPowerEnable(), BSP_PeripheralAccess(), and BSP_RegisterWrite().

#define BSP_STATUS_UNSUPPORTED_MODE (-3)

BSP API return code, unsupported BSP mode.

Definition at line 48 of file bsp.h.

Function Documentation

int BSP_Disable ( void )

Deinitialize board support package functionality. Reverse actions performed by BSP_Init(). This function is a dummy on STK's.

Returns: BSP_STATUS_OK on DK's, BSP_STATUS_NOT_IMPLEMENTED on STK's.

Definition at line 97 of file bsp_dk_3201.c.

References BSP_BusControl_OFF, BSP_BusControlModeSet(), BSP_INIT_DK_EBI, BSP_INIT_DK_SPI, and BSP_STATUS_OK.

int BSP_Init ( uint32_t flags )

Initialize board support package functionality.

Parameters

[in] flags DK3x50: Initialize in EBI or SPI mode using BSP_INIT_DK_EBI or BSP_INIT_DK_SPI. Gxxx_DK: Use 0. STK: Use BSP_INIT_BCC to initialize board controller UART, 0 otherwise.

The value BSP_INIT_DEFAULT is defined and is: BSP_INIT_DK_EBI on DK3x50, 0 on all other kits.

Returns: BSP_STATUS_OK

Definition at line 127 of file bsp_dk_3201.c.

References BC_REGISTER, BSP_BusControl_EBI, BSP_BusControl_SPI, BSP_BusControlModeSet(), BSP_INIT_DK_EBI, BSP_INIT_DK_SPI, BSP_RegisterRead(), BSP_RegisterWrite(), and BSP_STATUS_OK.

int BSP_LedClear ( int ledNo )

Turn off a single LED.

Parameters

[in] ledNo The number of the LED (counting from zero) to turn off.

Returns: BSP_STATUS_OK or BSP_STATUS_ILLEGAL_PARAM if illegal LED number.

Definition at line 72 of file bsp_dk_leds.c.

References BSP_RegisterRead(), BSP_RegisterWrite(), BSP_STATUS_ILLEGAL_PARAM, and BSP_STATUS_OK.

int BSP_LedGet ( int ledNo )

Get current status of a single LED.

Parameters

[in] ledNo The number of the LED (counting from zero) to check.

Returns: 1 if LED is on, 0 if LED is off, BSP_STATUS_ILLEGAL_PARAM if illegal LED number.

Definition at line 93 of file bsp_dk_leds.c.

References BSP_RegisterRead(), and BSP_STATUS_ILLEGAL_PARAM.

int BSP_LedSet ( int ledNo )

Turn on a single LED.

Parameters

[in] ledNo The number of the LED (counting from zero) to turn on.

Returns: BSP_STATUS_OK or BSP_STATUS_ILLEGAL_PARAM if illegal LED number.

Definition at line 111 of file bsp_dk_leds.c.

References BSP_RegisterRead(), BSP_RegisterWrite(), BSP_STATUS_ILLEGAL_PARAM, and BSP_STATUS_OK.

uint32_t BSP_LedsGet ( void )

Get status of all LED's.

Returns: Bitmask with current status for all LED's.

Definition at line 48 of file bsp_dk_leds.c.

References BSP_RegisterRead().

int BSP_LedsInit ( void )

Initialize LED drivers.

Note: LED's are initially turned off.

Returns: BSP_STATUS_OK

Definition at line 37 of file bsp_dk_leds.c.

References BSP_RegisterWrite(), and BSP_STATUS_OK.

int BSP_LedsSet ( uint32_t leds )

Update all LED's.

Parameters

[in] leds Bitmask representing new status for all LED's. A 1 turns a LED on, a 0 turns a LED off.

Returns: BSP_STATUS_OK

Definition at line 60 of file bsp_dk_leds.c.

References BSP_RegisterWrite(), and BSP_STATUS_OK.

int BSP_LedToggle ( int ledNo )

Toggle a single LED.

Parameters

[in] ledNo The number of the LED (counting from zero) to toggle.

Returns: BSP_STATUS_OK or BSP_STATUS_ILLEGAL_PARAM if illegal LED number.

Definition at line 131 of file bsp_dk_leds.c.

References BSP_RegisterRead(), BSP_RegisterWrite(), BSP_STATUS_ILLEGAL_PARAM, and BSP_STATUS_OK.

int BSP_PeripheralAccess	(	BSP_Peripheral_TypeDef	perf,
		bool	enable
	)

DK Peripheral Access Control Enable or disable access to on-board peripherals through switches and SPI switch where applicable. Turn off conflicting peripherals when enabling another.

Parameters

[in]	perf	Which peripheral to configure. Use enum BSP_Peripheral_TypeDef or BSP_Peripheral_Typedef according to DK type.
[in]	enable	If true, set up access to peripheral, if false disable access.

Returns: BSP_STATUS_OK.

Definition at line 461 of file bsp_dk_3201.c.

References BC_PERICON_ANALOG_DIFF_SHIFT, BC_PERICON_ANALOG_SE_SHIFT, BC_PERICON_AUDIO_IN_SHIFT, BC_PERICON_AUDIO_OUT_SEL_SHIFT, BC_PERICON_AUDIO_OUT_SHIFT, BC_PERICON_I2C_SHIFT, BC_PERICON_I2S_ETH_SEL_SHIFT, BC_PERICON_I2S_ETH_SHIFT, BC_PERICON_RS232_LEUART_SHIFT, BC_PERICON_RS232_SHUTDOWN_SHIFT, BC_PERICON_RS232_UART_SHIFT, BC_PERICON_SPI_SHIFT, BC_PERICON_TOUCH_SHIFT, BC_PERICON_TRACE_SHIFT, BC_REGISTER, BSP_ANALOG_DIFF, BSP_ANALOG_SE, BSP_AUDIO_IN, BSP_AUDIO_OUT, BSP_ETH, BSP_I2C, BSP_I2S, BSP_MICROSD, BSP_RegisterRead(), BSP_RegisterWrite(), BSP_RS232_LEUART, BSP_RS232_SHUTDOWN, BSP_RS232_UART, BSP_STATUS_OK, BSP_TFT, BSP_TOUCH, and BSP_TRACE.

Referenced by TFT_DirectInit(), and TOUCH_Init().

__STATIC_INLINE void BSP_TraceProfilerEnable ( bool enable )

Set or clear word in user page which enables or disables SWO in BSP_TraceProfilerSetup. If BSP_TraceProfilerEnable(false) has been run, no example project will enable SWO trace.

Parameters

[in] enable