USART_InitSync_TypeDef Struct Reference

Detailed Description

Synchronous mode init structure.

Definition at line 418 of file em_usart.h.

#include <em_usart.h>

Data Fields
bool	autoCsEnable
uint8_t	autoCsHold
uint8_t	autoCsSetup
bool	autoTx
uint32_t	baudrate
USART_ClockMode_TypeDef	clockMode
USART_Databits_TypeDef	databits
USART_Enable_TypeDef	enable
bool	master
bool	msbf
USART_PrsRxCh_TypeDef	prsRxCh
bool	prsRxEnable
uint32_t	refFreq

Field Documentation

bool USART_InitSync_TypeDef::autoCsEnable

Auto CS enabling

Definition at line 457 of file em_usart.h.

Referenced by USART_InitSync().

uint8_t USART_InitSync_TypeDef::autoCsHold

Auto CS hold time in baud cycles

Definition at line 459 of file em_usart.h.

Referenced by USART_InitSync().

uint8_t USART_InitSync_TypeDef::autoCsSetup

Auto CS setup time in baud cycles

Definition at line 461 of file em_usart.h.

Referenced by USART_InitSync().

bool USART_InitSync_TypeDef::autoTx

Enable AUTOTX mode. Transmits as long as RX is not full. If TX is empty, underflows are generated.

Definition at line 453 of file em_usart.h.

Referenced by USART_InitSync().

uint32_t USART_InitSync_TypeDef::baudrate

Desired baudrate.

Definition at line 430 of file em_usart.h.

Referenced by MICROSD_Init(), SPIDRV_Init(), and USART_InitSync().

USART_ClockMode_TypeDef USART_InitSync_TypeDef::clockMode

Clock polarity/phase mode.

Definition at line 442 of file em_usart.h.

Referenced by SPIDRV_Init(), and USART_InitSync().

USART_Databits_TypeDef USART_InitSync_TypeDef::databits

Number of databits in frame.

Definition at line 433 of file em_usart.h.

Referenced by USART_InitSync().

USART_Enable_TypeDef USART_InitSync_TypeDef::enable

Specifies whether TX and/or RX shall be enabled when init completed.

Definition at line 421 of file em_usart.h.

Referenced by USART_InitI2s(), and USART_InitSync().

bool USART_InitSync_TypeDef::master

Select if to operate in master or slave mode.

Definition at line 436 of file em_usart.h.

Referenced by SPIDRV_Init(), and USART_InitSync().

bool USART_InitSync_TypeDef::msbf

Select if to send most or least significant bit first.

Definition at line 439 of file em_usart.h.

Referenced by MICROSD_Init(), SPIDRV_Init(), and USART_InitSync().

USART_PrsRxCh_TypeDef USART_InitSync_TypeDef::prsRxCh

Select PRS channel for USART Rx. (Only valid if prsRxEnable is true).

Definition at line 449 of file em_usart.h.

Referenced by USART_InitSync().

bool USART_InitSync_TypeDef::prsRxEnable

Enable USART Rx via PRS.

Definition at line 446 of file em_usart.h.

Referenced by USART_InitSync().

uint32_t USART_InitSync_TypeDef::refFreq

USART/UART reference clock assumed when configuring baudrate setup. Set it to 0 if currently configurated reference clock shall be used.

Definition at line 427 of file em_usart.h.

Referenced by USART_InitSync().

---

The documentation for this struct was generated from the following file:

• D:/jenkins-slave/workspaces/Executor-0/super/platform/emlib/inc/em_usart.h