|
EFM32 Jade Gecko 1 Software Documentation
efm32jg1-doc-5.1.2
|
|
EFM32 Jade Gecko 1 Software Documentation
efm32jg1-doc-5.1.2
|
Definition at line 41 of file efm32jg1b_adc.h.
Data Fields | |
| __IM uint32_t | APORTCONFLICT |
| __IOM uint32_t | APORTMASTERDIS |
| __IM uint32_t | APORTREQ |
| __IOM uint32_t | BIASPROG |
| __IOM uint32_t | CAL |
| __IOM uint32_t | CMD |
| __IOM uint32_t | CMPTHR |
| __IOM uint32_t | CTRL |
| __IOM uint32_t | IEN |
| __IM uint32_t | IF |
| __IOM uint32_t | IFC |
| __IOM uint32_t | IFS |
| uint32_t | RESERVED0 [1] |
| uint32_t | RESERVED1 [4] |
| uint32_t | RESERVED2 [3] |
| __IOM uint32_t | SCANCTRL |
| __IOM uint32_t | SCANCTRLX |
| __IM uint32_t | SCANDATA |
| __IM uint32_t | SCANDATAP |
| __IM uint32_t | SCANDATAX |
| __IM uint32_t | SCANDATAXP |
| __IOM uint32_t | SCANFIFOCLEAR |
| __IM uint32_t | SCANFIFOCOUNT |
| __IOM uint32_t | SCANINPUTSEL |
| __IOM uint32_t | SCANMASK |
| __IOM uint32_t | SCANNEGSEL |
| __IOM uint32_t | SINGLECTRL |
| __IOM uint32_t | SINGLECTRLX |
| __IM uint32_t | SINGLEDATA |
| __IM uint32_t | SINGLEDATAP |
| __IOM uint32_t | SINGLEFIFOCLEAR |
| __IM uint32_t | SINGLEFIFOCOUNT |
| __IM uint32_t | STATUS |
| __IM uint32_t ADC_TypeDef::APORTCONFLICT |
APORT Conflict Status Register
Definition at line 71 of file efm32jg1b_adc.h.
| __IOM uint32_t ADC_TypeDef::APORTMASTERDIS |
APORT Bus Master Disable Register
Definition at line 76 of file efm32jg1b_adc.h.
| __IM uint32_t ADC_TypeDef::APORTREQ |
APORT Request Status Register
Definition at line 70 of file efm32jg1b_adc.h.
| __IOM uint32_t ADC_TypeDef::BIASPROG |
Bias Programming Register for various analog blocks used in ADC operation.
Definition at line 55 of file efm32jg1b_adc.h.
Referenced by ADC_InitSingle(), and ADC_Reset().
| __IOM uint32_t ADC_TypeDef::CAL |
Calibration Register
Definition at line 56 of file efm32jg1b_adc.h.
| __IOM uint32_t ADC_TypeDef::CMD |
Command Register
Definition at line 45 of file efm32jg1b_adc.h.
Referenced by ADC_Init(), ADC_InitScan(), ADC_InitSingle(), ADC_Reset(), and ADC_Start().
| __IOM uint32_t ADC_TypeDef::CMPTHR |
Compare Threshold Register
Definition at line 54 of file efm32jg1b_adc.h.
| __IOM uint32_t ADC_TypeDef::CTRL |
Control Register
Definition at line 43 of file efm32jg1b_adc.h.
Referenced by ADC_Init(), ADC_InitScan(), ADC_InitSingle(), and ADC_Reset().
| __IOM uint32_t ADC_TypeDef::IEN |
Interrupt Enable Register
Definition at line 60 of file efm32jg1b_adc.h.
Referenced by ADC_IntDisable(), ADC_IntEnable(), ADC_IntGetEnabled(), and ADC_Reset().
| __IM uint32_t ADC_TypeDef::IF |
Interrupt Flag Register
Definition at line 57 of file efm32jg1b_adc.h.
Referenced by ADC_IntGet(), and ADC_IntGetEnabled().
| __IOM uint32_t ADC_TypeDef::IFC |
Interrupt Flag Clear Register
Definition at line 59 of file efm32jg1b_adc.h.
Referenced by ADC_IntClear(), and ADC_Reset().
| __IOM uint32_t ADC_TypeDef::IFS |
Interrupt Flag Set Register
Definition at line 58 of file efm32jg1b_adc.h.
Referenced by ADC_IntSet().
| uint32_t ADC_TypeDef::RESERVED0[1] |
Reserved for future use
Definition at line 44 of file efm32jg1b_adc.h.
| uint32_t ADC_TypeDef::RESERVED1[4] |
Reserved for future use
Definition at line 65 of file efm32jg1b_adc.h.
| uint32_t ADC_TypeDef::RESERVED2[3] |
Reserved for future use
Definition at line 69 of file efm32jg1b_adc.h.
| __IOM uint32_t ADC_TypeDef::SCANCTRL |
Scan Control Register
Definition at line 49 of file efm32jg1b_adc.h.
Referenced by ADC_InitScan(), and ADC_Reset().
| __IOM uint32_t ADC_TypeDef::SCANCTRLX |
Scan Control Register continued
Definition at line 50 of file efm32jg1b_adc.h.
Referenced by ADC_InitScan(), and ADC_Reset().
| __IM uint32_t ADC_TypeDef::SCANDATA |
Scan Conversion Result Data
Definition at line 62 of file efm32jg1b_adc.h.
Referenced by ADC_DataScanGet().
| __IM uint32_t ADC_TypeDef::SCANDATAP |
Scan Sequence Result Data Peek Register
Definition at line 64 of file efm32jg1b_adc.h.
Referenced by ADC_DataScanPeek().
| __IM uint32_t ADC_TypeDef::SCANDATAX |
Scan Sequence Result Data + Data Source Register
Definition at line 66 of file efm32jg1b_adc.h.
Referenced by ADC_DataIdScanGet().
| __IM uint32_t ADC_TypeDef::SCANDATAXP |
Scan Sequence Result Data + Data Source Peek Register
Definition at line 67 of file efm32jg1b_adc.h.
| __IOM uint32_t ADC_TypeDef::SCANFIFOCLEAR |
| __IM uint32_t ADC_TypeDef::SCANFIFOCOUNT |
Scan FIFO Count Register
Definition at line 73 of file efm32jg1b_adc.h.
| __IOM uint32_t ADC_TypeDef::SCANINPUTSEL |
Input Selection register for Scan mode
Definition at line 52 of file efm32jg1b_adc.h.
Referenced by ADC_InitScan(), and ADC_Reset().
| __IOM uint32_t ADC_TypeDef::SCANMASK |
Scan Sequence Input Mask Register
Definition at line 51 of file efm32jg1b_adc.h.
Referenced by ADC_InitScan(), and ADC_Reset().
| __IOM uint32_t ADC_TypeDef::SCANNEGSEL |
Negative Input select register for Scan
Definition at line 53 of file efm32jg1b_adc.h.
Referenced by ADC_InitScan(), and ADC_Reset().
| __IOM uint32_t ADC_TypeDef::SINGLECTRL |
Single Channel Control Register
Definition at line 47 of file efm32jg1b_adc.h.
Referenced by ADC_InitSingle(), and ADC_Reset().
| __IOM uint32_t ADC_TypeDef::SINGLECTRLX |
Single Channel Control Register continued
Definition at line 48 of file efm32jg1b_adc.h.
Referenced by ADC_InitSingle(), and ADC_Reset().
| __IM uint32_t ADC_TypeDef::SINGLEDATA |
Single Conversion Result Data
Definition at line 61 of file efm32jg1b_adc.h.
Referenced by ADC_DataSingleGet().
| __IM uint32_t ADC_TypeDef::SINGLEDATAP |
Single Conversion Result Data Peek Register
Definition at line 63 of file efm32jg1b_adc.h.
Referenced by ADC_DataSinglePeek().
| __IOM uint32_t ADC_TypeDef::SINGLEFIFOCLEAR |
Single FIFO Clear Register
Definition at line 74 of file efm32jg1b_adc.h.
Referenced by ADC_Reset().
| __IM uint32_t ADC_TypeDef::SINGLEFIFOCOUNT |
Single FIFO Count Register
Definition at line 72 of file efm32jg1b_adc.h.
| __IM uint32_t ADC_TypeDef::STATUS |
Status Register
Definition at line 46 of file efm32jg1b_adc.h.
Referenced by ADC_InitScan(), and ADC_InitSingle().
1.8.10 
