em_prs.h File Reference

Detailed Description

Peripheral Reflex System (PRS) peripheral API.

Version

5.1.2

License

Copyright 2016 Silicon Laboratories, Inc. http://www.silabs.com

Permission is granted to anyone to use this software for any purpose, including commercial applications, and to alter it and redistribute it freely, subject to the following restrictions:

1. The origin of this software must not be misrepresented; you must not claim that you wrote the original software.
2. Altered source versions must be plainly marked as such, and must not be misrepresented as being the original software.
3. This notice may not be removed or altered from any source distribution.

DISCLAIMER OF WARRANTY/LIMITATION OF REMEDIES: Silicon Labs has no obligation to support this Software. Silicon Labs is providing the Software "AS IS", with no express or implied warranties of any kind, including, but not limited to, any implied warranties of merchantability or fitness for any particular purpose or warranties against infringement of any proprietary rights of a third party.

Silicon Labs will not be liable for any consequential, incidental, or special damages, or any other relief, or for any claim by any third party, arising from your use of this Software.

Definition in file em_prs.h.

#include "em_device.h"

Go to the source code of this file.

Enumerations
enum	PRS_Edge_TypeDef {   prsEdgeOff = PRS_CH_CTRL_EDSEL_OFF,   prsEdgePos = PRS_CH_CTRL_EDSEL_POSEDGE,   prsEdgeNeg = PRS_CH_CTRL_EDSEL_NEGEDGE,   prsEdgeBoth = PRS_CH_CTRL_EDSEL_BOTHEDGES }

Functions
__STATIC_INLINE void	PRS_LevelSet (uint32_t level, uint32_t mask)
	Set level control bit for one or more channels. More...
__STATIC_INLINE void	PRS_PulseTrigger (uint32_t channels)
	Trigger a high pulse (one HFPERCLK) for one or more channels. More...
void	PRS_SourceAsyncSignalSet (unsigned int ch, uint32_t source, uint32_t signal)
	Set source and asynchronous signal to be used for a channel. More...
void	PRS_SourceSignalSet (unsigned int ch, uint32_t source, uint32_t signal, PRS_Edge_TypeDef edge)
	Set source and signal to be used for a channel. More...