em_emu.h File Reference

Detailed Description

Energy management unit (EMU) peripheral API.

Version

5.1.2

License

Copyright 2016 Silicon Laboratories, Inc. http://www.silabs.com

Permission is granted to anyone to use this software for any purpose, including commercial applications, and to alter it and redistribute it freely, subject to the following restrictions:

1. The origin of this software must not be misrepresented; you must not claim that you wrote the original software.
2. Altered source versions must be plainly marked as such, and must not be misrepresented as being the original software.
3. This notice may not be removed or altered from any source distribution.

DISCLAIMER OF WARRANTY/LIMITATION OF REMEDIES: Silicon Labs has no obligation to support this Software. Silicon Labs is providing the Software "AS IS", with no express or implied warranties of any kind, including, but not limited to, any implied warranties of merchantability or fitness for any particular purpose or warranties against infringement of any proprietary rights of a third party.

Silicon Labs will not be liable for any consequential, incidental, or special damages, or any other relief, or for any claim by any third party, arising from your use of this Software.

Definition in file em_emu.h.

#include "em_device.h"
#include <stdbool.h>
#include "em_bus.h"

Go to the source code of this file.

Data Structures
struct	EMU_BUPDInit_TypeDef
struct	EMU_EM23Init_TypeDef
struct	EMU_EM4Init_TypeDef

Macros
#define	EMU_BUPDINIT_DEFAULT
#define	EMU_EM23INIT_DEFAULT
#define	EMU_EM4INIT_DEFAULT

Enumerations
enum	EMU_BODMode_TypeDef {   emuBODMode_Active,   emuBODMode_Inactive }
enum	EMU_EM4Osc_TypeDef {   emuEM4Osc_ULFRCO = EMU_EM4CONF_OSC_ULFRCO,   emuEM4Osc_LFXO = EMU_EM4CONF_OSC_LFXO,   emuEM4Osc_LFRCO = EMU_EM4CONF_OSC_LFRCO }
enum	EMU_Power_TypeDef {   emuPower_None = EMU_BUINACT_PWRCON_NONE,   emuPower_BUMain = EMU_BUINACT_PWRCON_BUMAIN,   emuPower_MainBU = EMU_BUINACT_PWRCON_MAINBU,   emuPower_NoDiode = EMU_BUINACT_PWRCON_NODIODE }
enum	EMU_PowerConfig_TypeDef { emuPowerConfig_DcdcToDvdd }
enum	EMU_Probe_TypeDef {   emuProbe_Disable = EMU_BUCTRL_PROBE_DISABLE,   emuProbe_VDDDReg = EMU_BUCTRL_PROBE_VDDDREG,   emuProbe_BUIN = EMU_BUCTRL_PROBE_BUIN,   emuProbe_BUOUT = EMU_BUCTRL_PROBE_BUOUT }
enum	EMU_Resistor_TypeDef {   emuRes_Res0 = EMU_PWRCONF_PWRRES_RES0,   emuRes_Res1 = EMU_PWRCONF_PWRRES_RES1,   emuRes_Res2 = EMU_PWRCONF_PWRRES_RES2,   emuRes_Res3 = EMU_PWRCONF_PWRRES_RES3 }

Functions
void	EMU_BUPDInit (const EMU_BUPDInit_TypeDef *bupdInit)
	Configure Backup Power Domain settings. More...
__STATIC_INLINE void	EMU_BUPinEnable (bool enable)
	Disable BU_VIN support. More...
__STATIC_INLINE void	EMU_BUReady (void)
	Halts until backup power functionality is ready.
void	EMU_BUThresholdSet (EMU_BODMode_TypeDef mode, uint32_t value)
	Configure Backup Power Domain BOD Threshold value. More...
void	EMU_BUThresRangeSet (EMU_BODMode_TypeDef mode, uint32_t value)
	Configure Backup Power Domain BOD Threshold Range. More...
void	EMU_EM23Init (const EMU_EM23Init_TypeDef *em23Init)
	Update EMU module with Energy Mode 2 and 3 configuration. More...
__STATIC_INLINE void	EMU_EM2Block (void)
	Block entering EM2 or higher number energy modes.
__STATIC_INLINE void	EMU_EM2UnBlock (void)
	Unblock entering EM2 or higher number energy modes.
void	EMU_EM4Init (const EMU_EM4Init_TypeDef *em4Init)
	Update EMU module with Energy Mode 4 configuration. More...
__STATIC_INLINE void	EMU_EM4Lock (bool enable)
	Enable or disable EM4 lock configuration. More...
__STATIC_INLINE void	EMU_EnterEM1 (void)
	Enter energy mode 1 (EM1).
void	EMU_EnterEM2 (bool restore)
	Enter energy mode 2 (EM2). More...
void	EMU_EnterEM3 (bool restore)
	Enter energy mode 3 (EM3). More...
void	EMU_EnterEM4 (void)
	Enter energy mode 4 (EM4). More...
__STATIC_INLINE void	EMU_IntClear (uint32_t flags)
	Clear one or more pending EMU interrupts. More...
__STATIC_INLINE void	EMU_IntDisable (uint32_t flags)
	Disable one or more EMU interrupts. More...
__STATIC_INLINE void	EMU_IntEnable (uint32_t flags)
	Enable one or more EMU interrupts. More...
__STATIC_INLINE uint32_t	EMU_IntGet (void)
	Get pending EMU interrupt flags. More...
__STATIC_INLINE uint32_t	EMU_IntGetEnabled (void)
	Get enabled and pending EMU interrupt flags. Useful for handling more interrupt sources in the same interrupt handler. More...
__STATIC_INLINE void	EMU_IntSet (uint32_t flags)
	Set one or more pending EMU interrupts. More...
__STATIC_INLINE void	EMU_Lock (void)
	Lock the EMU in order to protect its registers against unintended modification. More...
void	EMU_MemPwrDown (uint32_t blocks)
	Power down memory block. More...
void	EMU_RamPowerDown (uint32_t start, uint32_t end)
	Power down RAM memory blocks. More...
void	EMU_Restore (void)
	Restore CMU HF clock select state, oscillator enable and voltage scaling (if available) after EMU_EnterEM2() or EMU_EnterEM3() are called with the restore parameter set to false. Calling this function is equivalent to calling EMU_EnterEM2() or EMU_EnterEM3() with the restore parameter set to true, but it allows the application to evaluate the wakeup reason before restoring state.
__STATIC_INLINE void	EMU_Unlock (void)
	Unlock the EMU so that writing to locked registers again is possible.
void	EMU_UpdateOscConfig (void)
	Update EMU module with CMU oscillator selection/enable status. More...