EFM32 Giant Gecko Software Documentation  efm32gg-doc-5.1.2
efm32gg_prs_signals.h File Reference

Detailed Description

EFM32GG_PRS_SIGNALS register and bit field definitions.

Version
5.1.2

License

Copyright 2017 Silicon Laboratories, Inc. http://www.silabs.com

Permission is granted to anyone to use this software for any purpose, including commercial applications, and to alter it and redistribute it freely, subject to the following restrictions:

  1. The origin of this software must not be misrepresented; you must not claim that you wrote the original software.
  2. Altered source versions must be plainly marked as such, and must not be misrepresented as being the original software.
  3. This notice may not be removed or altered from any source distribution.

DISCLAIMER OF WARRANTY/LIMITATION OF REMEDIES: Silicon Laboratories, Inc. has no obligation to support this Software. Silicon Laboratories, Inc. is providing the Software "AS IS", with no express or implied warranties of any kind, including, but not limited to, any implied warranties of merchantability or fitness for any particular purpose or warranties against infringement of any proprietary rights of a third party.

Silicon Laboratories, Inc. will not be liable for any consequential, incidental, or special damages, or any other relief, or for any claim by any third party, arising from your use of this Software.

Definition in file efm32gg_prs_signals.h.

Go to the source code of this file.

Macros

#define PRS_ACMP0_OUT   ((2 << 16) + 0)
 
#define PRS_ACMP1_OUT   ((3 << 16) + 0)
 
#define PRS_ADC0_SCAN   ((8 << 16) + 1)
 
#define PRS_ADC0_SINGLE   ((8 << 16) + 0)
 
#define PRS_BURTC_COMP0   ((55 << 16) + 1)
 
#define PRS_BURTC_OF   ((55 << 16) + 0)
 
#define PRS_DAC0_CH0   ((6 << 16) + 0)
 
#define PRS_DAC0_CH1   ((6 << 16) + 1)
 
#define PRS_GPIO_PIN0   ((48 << 16) + 0)
 
#define PRS_GPIO_PIN1   ((48 << 16) + 1)
 
#define PRS_GPIO_PIN10   ((49 << 16) + 2)
 
#define PRS_GPIO_PIN11   ((49 << 16) + 3)
 
#define PRS_GPIO_PIN12   ((49 << 16) + 4)
 
#define PRS_GPIO_PIN13   ((49 << 16) + 5)
 
#define PRS_GPIO_PIN14   ((49 << 16) + 6)
 
#define PRS_GPIO_PIN15   ((49 << 16) + 7)
 
#define PRS_GPIO_PIN2   ((48 << 16) + 2)
 
#define PRS_GPIO_PIN3   ((48 << 16) + 3)
 
#define PRS_GPIO_PIN4   ((48 << 16) + 4)
 
#define PRS_GPIO_PIN5   ((48 << 16) + 5)
 
#define PRS_GPIO_PIN6   ((48 << 16) + 6)
 
#define PRS_GPIO_PIN7   ((48 << 16) + 7)
 
#define PRS_GPIO_PIN8   ((49 << 16) + 0)
 
#define PRS_GPIO_PIN9   ((49 << 16) + 1)
 
#define PRS_LESENSE_DEC0   ((59 << 16) + 0)
 
#define PRS_LESENSE_DEC1   ((59 << 16) + 1)
 
#define PRS_LESENSE_DEC2   ((59 << 16) + 2)
 
#define PRS_LESENSE_SCANRES0   ((57 << 16) + 0)
 
#define PRS_LESENSE_SCANRES1   ((57 << 16) + 1)
 
#define PRS_LESENSE_SCANRES10   ((58 << 16) + 2)
 
#define PRS_LESENSE_SCANRES11   ((58 << 16) + 3)
 
#define PRS_LESENSE_SCANRES12   ((58 << 16) + 4)
 
#define PRS_LESENSE_SCANRES13   ((58 << 16) + 5)
 
#define PRS_LESENSE_SCANRES14   ((58 << 16) + 6)
 
#define PRS_LESENSE_SCANRES15   ((58 << 16) + 7)
 
#define PRS_LESENSE_SCANRES2   ((57 << 16) + 2)
 
#define PRS_LESENSE_SCANRES3   ((57 << 16) + 3)
 
#define PRS_LESENSE_SCANRES4   ((57 << 16) + 4)
 
#define PRS_LESENSE_SCANRES5   ((57 << 16) + 5)
 
#define PRS_LESENSE_SCANRES6   ((57 << 16) + 6)
 
#define PRS_LESENSE_SCANRES7   ((57 << 16) + 7)
 
#define PRS_LESENSE_SCANRES8   ((58 << 16) + 0)
 
#define PRS_LESENSE_SCANRES9   ((58 << 16) + 1)
 
#define PRS_LETIMER0_CH0   ((52 << 16) + 0)
 
#define PRS_LETIMER0_CH1   ((52 << 16) + 1)
 
#define PRS_RTC_COMP0   ((40 << 16) + 1)
 
#define PRS_RTC_COMP1   ((40 << 16) + 2)
 
#define PRS_RTC_OF   ((40 << 16) + 0)
 
#define PRS_TIMER0_CC0   ((28 << 16) + 2)
 
#define PRS_TIMER0_CC1   ((28 << 16) + 3)
 
#define PRS_TIMER0_CC2   ((28 << 16) + 4)
 
#define PRS_TIMER0_OF   ((28 << 16) + 1)
 
#define PRS_TIMER0_UF   ((28 << 16) + 0)
 
#define PRS_TIMER1_CC0   ((29 << 16) + 2)
 
#define PRS_TIMER1_CC1   ((29 << 16) + 3)
 
#define PRS_TIMER1_CC2   ((29 << 16) + 4)
 
#define PRS_TIMER1_OF   ((29 << 16) + 1)
 
#define PRS_TIMER1_UF   ((29 << 16) + 0)
 
#define PRS_TIMER2_CC0   ((30 << 16) + 2)
 
#define PRS_TIMER2_CC1   ((30 << 16) + 3)
 
#define PRS_TIMER2_CC2   ((30 << 16) + 4)
 
#define PRS_TIMER2_OF   ((30 << 16) + 1)
 
#define PRS_TIMER2_UF   ((30 << 16) + 0)
 
#define PRS_TIMER3_CC0   ((31 << 16) + 2)
 
#define PRS_TIMER3_CC1   ((31 << 16) + 3)
 
#define PRS_TIMER3_CC2   ((31 << 16) + 4)
 
#define PRS_TIMER3_OF   ((31 << 16) + 1)
 
#define PRS_TIMER3_UF   ((31 << 16) + 0)
 
#define PRS_UART0_RXDATAV   ((41 << 16) + 2)
 
#define PRS_UART0_TXC   ((41 << 16) + 1)
 
#define PRS_UART1_RXDATAV   ((42 << 16) + 2)
 
#define PRS_UART1_TXC   ((42 << 16) + 1)
 
#define PRS_USART0_IRTX   ((16 << 16) + 0)
 
#define PRS_USART0_RXDATAV   ((16 << 16) + 2)
 
#define PRS_USART0_TXC   ((16 << 16) + 1)
 
#define PRS_USART1_RXDATAV   ((17 << 16) + 2)
 
#define PRS_USART1_TXC   ((17 << 16) + 1)
 
#define PRS_USART2_RXDATAV   ((18 << 16) + 2)
 
#define PRS_USART2_TXC   ((18 << 16) + 1)
 
#define PRS_USB_SOF   ((36 << 16) + 0)
 
#define PRS_USB_SOFSR   ((36 << 16) + 1)
 
#define PRS_VCMP_OUT   ((1 << 16) + 0)