ACMP_Init_TypeDef Struct Reference

Detailed Description

ACMP initialization structure.

Definition at line 649 of file em_acmp.h.

#include <em_acmp.h>

Data Fields
uint32_t	biasProg
bool	enable
bool	fullBias
bool	halfBias
ACMP_HysteresisLevel_TypeDef	hysteresisLevel
bool	inactiveValue
bool	interruptOnFallingEdge
bool	interruptOnRisingEdge
bool	lowPowerReferenceEnabled
uint32_t	vddLevel
ACMP_WarmTime_TypeDef	warmTime

Field Documentation

uint32_t ACMP_Init_TypeDef::biasProg

Bias current. See the ACMP chapter about bias and response time in the reference manual for details. Valid values are in the range 0-7.

Definition at line 663 of file em_acmp.h.

Referenced by ACMP_Init().

bool ACMP_Init_TypeDef::enable

If true, ACMP is being enabled after configuration.

Definition at line 728 of file em_acmp.h.

Referenced by ACMP_Init().

bool ACMP_Init_TypeDef::fullBias

Full bias current. See the ACMP chapter about bias and response time in the reference manual for details.

Definition at line 653 of file em_acmp.h.

Referenced by ACMP_Init().

bool ACMP_Init_TypeDef::halfBias

Half bias current. See the ACMP chapter about bias and response time in the reference manual for details.

Definition at line 658 of file em_acmp.h.

Referenced by ACMP_Init().

ACMP_HysteresisLevel_TypeDef ACMP_Init_TypeDef::hysteresisLevel

Hysteresis level

Definition at line 697 of file em_acmp.h.

Referenced by ACMP_Init().

bool ACMP_Init_TypeDef::inactiveValue

Inactive value emitted by the ACMP during warmup

Definition at line 713 of file em_acmp.h.

Referenced by ACMP_Init().

bool ACMP_Init_TypeDef::interruptOnFallingEdge

Enable setting the interrupt flag on falling edge

Definition at line 666 of file em_acmp.h.

Referenced by ACMP_Init().

bool ACMP_Init_TypeDef::interruptOnRisingEdge

Enable setting the interrupt flag on rising edge

Definition at line 669 of file em_acmp.h.

Referenced by ACMP_Init().

bool ACMP_Init_TypeDef::lowPowerReferenceEnabled

Low power reference enabled. This setting, if enabled, reduces the power used by the VDD and bandgap references.

Definition at line 718 of file em_acmp.h.

Referenced by ACMP_Init().

uint32_t ACMP_Init_TypeDef::vddLevel

Vdd reference value. VDD_SCALED = VDD * VDDLEVEL * 50mV/3.8V. Valid values are in the range 0-63.

Definition at line 724 of file em_acmp.h.

Referenced by ACMP_Init().

ACMP_WarmTime_TypeDef ACMP_Init_TypeDef::warmTime

Warmup time. This is measured in HFPERCLK cycles and should be about 10us in wall clock time.

Definition at line 692 of file em_acmp.h.

Referenced by ACMP_Init().

---

The documentation for this struct was generated from the following file:

• D:/jenkins-slave/workspaces/Executor-0/super/platform/emlib/inc/em_acmp.h