nandflash.h File Reference

Detailed Description

EFM32GG_STK3700 nandflash driver.

Version

5.1.1

License

Copyright 2015 Silicon Labs, Inc. http://www.silabs.com

This file is licensed under the Silabs License Agreement. See the file "Silabs_License_Agreement.txt" for details. Before using this software for any purpose, you must agree to the terms of that agreement.

Definition in file nandflash.h.

Go to the source code of this file.

Data Structures
struct	NANDFLASH_Info_TypeDef
	NANDFLASH device information structure. More...

Macros
#define	NAND256W3A_SPARESIZE   16
#define	NAND_SPARE_BADBLOCK_POS   5
#define	NAND_SPARE_ECC0_POS   6
#define	NAND_SPARE_ECC1_POS   7
#define	NAND_SPARE_ECC2_POS   8

Enumerations
enum	NANDFLASH_Status_TypeDef {   NANDFLASH_STATUS_OK = 0,   NANDFLASH_INVALID_DEVICE = -1,   NANDFLASH_INVALID_ADDRESS = -2,   NANDFLASH_WRITE_ERROR = -3,   NANDFLASH_ECC_ERROR = -4,   NANDFLASH_ECC_UNCORRECTABLE = -5,   NANDFLASH_INVALID_SETUP = -6,   NANDFLASH_NOT_INITIALIZED = -7 }
	NANDFLASH status enumerator. More...

Functions
bool	NANDFLASH_AddressValid (uint32_t addr)
	Check if an address is valid for the nand flash device. More...
int	NANDFLASH_CopyPage (uint32_t dstAddr, uint32_t srcAddr)
	Copy a page within the device to a new location. More...
NANDFLASH_Info_TypeDef *	NANDFLASH_DeviceInfo (void)
	Return a pointer to a NANDFLASH_Info_TypeDef structure, which contain vital nand flash device information. More...
int	NANDFLASH_EccCorrect (uint32_t generatedEcc, uint32_t readEcc, uint8_t *data)
	Check generated ECC against ECC read from device and correct data if possible. More...
int	NANDFLASH_EraseBlock (uint32_t address)
	Erase a block in the nand flash. More...
int	NANDFLASH_Init (int dmaCh)
	Initialize the NANDFLASH module. More...
int	NANDFLASH_MarkBadBlock (uint32_t address)
	Mark a block as bad. More...
int	NANDFLASH_ReadPage (uint32_t address, uint8_t *buffer)
	Read a page from nand device. Ecc errors will be detected and corrected if possible. NANDFLASH_Info_TypeDef::ecc will be set to the ecc generated while reading the page data. NANDFLASH_Info_TypeDef::spare will be set to the content of the page spare area. More...
int	NANDFLASH_ReadSpare (uint32_t address, uint8_t *buffer)
	Read the spare area content of a page. More...
int	NANDFLASH_WritePage (uint32_t address, uint8_t *buffer)
	Write a page in nand device. The ECC generated while writing the page data is written in the spare area at byte positions 7, 8 and 9. More...