Specify operation modes of the NAND interface. More...

Macros
#define	ARM_NAND_BUS_MODE (0x01)
	Set Bus Mode as specified with arg.

#define	ARM_NAND_BUS_DATA_WIDTH (0x02)
	Set Bus Data Width as specified with arg.

#define	ARM_NAND_DRIVER_STRENGTH (0x03)
	Set Driver Strength as specified with arg.

#define	ARM_NAND_DEVICE_READY_EVENT (0x04)
	Generate ARM_NAND_EVENT_DEVICE_READY; arg: 0=disabled (default), 1=enabled.

#define	ARM_NAND_DRIVER_READY_EVENT (0x05)
	Generate ARM_NAND_EVENT_DRIVER_READY; arg: 0=disabled (default), 1=enabled.

Description

Specify operation modes of the NAND interface.

These controls can be used in the function ARM_NAND_Control for the parameter control.

Macro Definition Documentation

#define ARM_NAND_BUS_MODE (0x01)

Set Bus Mode as specified with arg.

#define ARM_NAND_BUS_DATA_WIDTH (0x02)

Set Bus Data Width as specified with arg.

#define ARM_NAND_DRIVER_STRENGTH (0x03)

Set Driver Strength as specified with arg.

#define ARM_NAND_DEVICE_READY_EVENT (0x04)

Generate ARM_NAND_EVENT_DEVICE_READY; arg: 0=disabled (default), 1=enabled.

#define ARM_NAND_DRIVER_READY_EVENT (0x05)

Generate ARM_NAND_EVENT_DRIVER_READY; arg: 0=disabled (default), 1=enabled.