# Power Measurements for Wi-Fi Devices This page explains how to measure the power values for EFR and Wi-Fi co-processor. ## EFR32 + RS9116 Setup for Sleepy Devices ![Power measurement GPIO pin connection for 9116](./images/WiFi_9116_GPIO_Connection.png) > Note: The following GPIO pins should be connected for 9116 and Host handshakes. \ pin 7 and 9 to UULP_2 and UULP_0 respectively. ## Using Simplicity Studio Energy Profiler for Current Measurement After flashing the Matter application to the device (EFR32 or SiWx917 SoC), Energy profiler or a power meter can be used for power measurements. ![Power measurement connection overview](./images/WiFi_PowerSave_Overview.png) In Simplicity Studio, click **Tools** on the toolbar, select Energy Profiler, and click "OK". ![Power measurement PowerProfiler](./images/WiFi_PowerProfiler.png) From the Quick Access or Profiler menu, select 'Start Energy Capture'. ![Power measurement using PowerProfiler](./images/WiFi_PowerProfiler_start.png) > **Note**: A quick-start guide on the Energy Profiler user interface is in the Simplicity Studio User's Guide's [Energy Profiler User Interface section](https://docs.silabs.com/simplicity-studio-5-users-guide/latest/ss-5-users-guide-tools-energy-profiler/energy-profiler-user-interface). ## Power Consumption Measurment (EFR) Using Energy Profiler Analyze the power values using Energy Profiler. ![Power measurement for EFR using EnergyProfiler](./images/WiFi_EFR_Power_EnergyProfiler.png) ## Power Consumption measurement Using a Power Meter ### Power Consumption Measurement Pins for RS9116 Evk Boards ![Power measurement pins for NCP mode](./images/WiFi_9116_PowerMeter_WiFiModule.png) ### Power Consumption Measurement Pins for EXP Boards ![Power measurement pins for NCP mode](./images/SiWx917_Ncp_PowerMeasurment_pins.png) The power meter's negative probe is used for pin-1 and the positive probe is used for pin-2. Analyze the power values using the power meter. ![Power measurement for 9116/917 using power meter](./images/WiFi_9116_Power_PowerProfiler.png)