EFM32 Happy Gecko Software Documentation
efm32hg-doc-5.1.2
Main Page
Modules
Files
Documentation Home
silabs.com
File List
ezradiodrv_config.h
Go to the documentation of this file.
1
/***************************************************************************/
32
#ifndef __SILICON_LABS_EZRADIODRV_CONFIG_H__
33
#define __SILICON_LABS_EZRADIODRV_CONFIG_H__
34
35
/***************************************************************************/
40
/***************************************************************************/
45
#define EZRADIODRV_COMM_CTS_RETRY 10000
47
49
//#define EZRADIODRV_COMM_USE_GPIO1_FOR_CTS
50
52
//#define EZRADIODRV_DISABLE_PTI
53
56
//#define EZRADIODRV_SPI_4WIRE_MODE
57
58
// ONly EZR32 devices support these macros by default, we need to add these for other
59
// devices. Uncomment & define all the following RF_* macros to support the EzRadio
60
// device on other EFM32 micros.
61
62
//#define RF_USARTRF_LOCATION 1 /**< RF SPI-port (USART) location number. */
63
//#define RF_USARTRF_CS_PORT 3 /**< Bit banged RF SPI CS GPIO port no. */
64
//#define RF_USARTRF_CS_PIN 3 /**< Bit banged RF SPI CS GPIO pin number.*/
65
//#define RF_USARTRF_CLK_PORT 3 /**< RF SPI CLK GPIO port number. */
66
//#define RF_USARTRF_CLK_PIN 2 /**< RF SPI CLK GPIO pin number. */
67
//#define RF_USARTRF_MISO_PORT 3 /**< RF SPI MISO GPIO port number. */
68
//#define RF_USARTRF_MISO_PIN 1 /**< RF SPI MISO GPIO pin number. */
69
//#define RF_USARTRF_MOSI_PORT 3 /**< RF SPI MOSI GPIO port number. */
70
//#define RF_USARTRF_MOSI_PIN 0 /**< RF SPI MOSI GPIO pin number. */
71
//#define RF_INT_PORT 2 /**< RF interrupt GPIO port number. */
72
//#define RF_INT_PIN 0 /**< RF interrupt GPIO pin number. */
73
//#define RF_SDN_PORT 2 /**< RF SDN GPIO port number. */
74
//#define RF_SDN_PIN 3 /**< RF SDN GPIO pin number. */
75
76
#if !(defined EZRADIODRV_DISABLE_PTI)
77
//#define RF_GPIO0_PORT 0 /**< RF GPIO0 GPIO port number. */
78
//#define RF_GPIO0_PIN 15 /**< RF GPIO0 GPIO pin number. */
79
//#define RF_GPIO1_PORT 4 /**< RF GPIO1 GPIO port number. */
80
//#define RF_GPIO1_PIN 14 /**< RF GPIO1 GPIO pin number. */
81
#endif
82
86
#endif
/* __SILICON_LABS_EZRADIODRV_CONFIG_H__ */
platform
emdrv
ezradiodrv
config
ezradiodrv_config.h
Generated on Thu Mar 9 2017 20:44:09 for EFM32 Happy Gecko Software Documentation by
1.8.10